Publications
-
79 GHz Slot Antennas Based on Substrate Integrated Waveguides (SIW) in a Flexible Printed Circuit Board
Part of IEEE Transactions on Antennas and Propagation, p. 64-71, 2009.
-
A compact projection system enabling topographical measurements for a miniaturized submersible explorer
Part of Proceedings of the 16th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS), 2011, p. 2518-2521, 2011.
-
A compact system to extract topography information from scenes viewed by a miniaturized submersible explorer
Part of Sensors and Actuators A-Physical, p. 401-410, 2012.
-
A Contact Angle Study of the Interaction between Embedded Amphiphilic Molecules and the PDMS Matrix in an Aqueous Environment
Part of Micromachines, p. 515-527, 2014.
DOI for A Contact Angle Study of the Interaction between Embedded Amphiphilic Molecules and the PDMS Matrix in an Aqueous Environment Download full text (pdf) of A Contact Angle Study of the Interaction between Embedded Amphiphilic Molecules and the PDMS Matrix in an Aqueous Environment
-
A disposable and multifunctional capsule for easy operation of microfluidic elastomer systems
Part of Journal of Micromechanics and Microengineering, p. 127001-, 2011.
DOI for A disposable and multifunctional capsule for easy operation of microfluidic elastomer systems Download full text (pdf) of A disposable and multifunctional capsule for easy operation of microfluidic elastomer systems
-
A fast liquid alloy patterning technique for microfluidic stretchable electronics
Part of A fast liquid alloy patterning technique for microfluidic stretchable electronics, p. 48-50, 2014.
-
A full-scale finite-element model of the Vasa ship
Part of Proceedings of ECCOMAS Thematic Conference CompWood 2017, 2017.
Download full text (pdf) of A full-scale finite-element model of the Vasa ship
-
A heavily miniaturized submersible: a terrestrial kickoff
Part of Proceedings of ASTRA 2008, p. 1-9, 2008.
Download full text (pdf) of A heavily miniaturized submersible: a terrestrial kickoff
-
A highly integratable silicon thermal gas flow sensor
Part of Journal of Micromechanics and Microengineering, p. 065015-, 2012.
DOI for A highly integratable silicon thermal gas flow sensor
-
A highly stretchable microfluidic meandered monopole antenna
Part of 13th International Conference on Miniaturized Systems for Chemistry and Life Sciences µTAS 2009, p. 1946-1948, 2009.
-
A High-Performance Microplasma Source for Highly Sensitive and Robust Gas Analysis
Part of Proc. of Micronano System Workshop 2014, Uppsala, Sweden, May 15-16, 2014, 2014.
-
A high-temperature calorimetric flow sensor employing ion conduction in zirconia
Part of Applied Physics Letters, 2015.
DOI for A high-temperature calorimetric flow sensor employing ion conduction in zirconia Download full text (pdf) of A high-temperature calorimetric flow sensor employing ion conduction in zirconia
-
A Hybrid Cold Gas Microthruster System for Spacecraft
Part of Sensors and Actuators A-Physical, p. 587-98, 2002.
DOI for A Hybrid Cold Gas Microthruster System for Spacecraft
-
A Latchable High-pressure Composite Valve Actuator Combining Paraffin and a Low Melting Point Alloy
Part of Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS), 2011 16th International, Beijing, China, p. 474-477, 2011.
-
A latchable high-pressure thermohydraulic valve actuator
Part of Sensors and Actuators A-Physical, p. 292-297, 2012.
DOI for A latchable high-pressure thermohydraulic valve actuator
-
A latchable paraffin actuated high-pressure paraffin microfluidic valve
Part of 15th International Conference on Solid-State Sensors, Actuators and Microsystems, Transducers 2009, p. 29-32, 2009.
DOI for A latchable paraffin actuated high-pressure paraffin microfluidic valve
-
A Latchable Valve for High-Pressure Microfluidics
Part of Journal of microelectromechanical systems, p. 396-401, 2010.
-
A metallic micropump for high-pressure microfluidics
Part of Journal of Micromechanics and Microengineering, p. 115009-, 2008.
DOI for A metallic micropump for high-pressure microfluidics
-
A method of manufacturing microfluidic contact lenses by using irreversible bonding and thermoforming
Part of Journal of Micromechanics and Microengineering, 2018.
-
A microfluidic approach for dynamic investigation of the antibiotic susceptibility of bacteria
Part of MME 2013 24th Micromechanics and Microsystems Europe Conference, 2013.
-
A microfluidic control board for high-pressure flow, composition, and relative permittivity
Part of Analytical Chemistry, p. 12601-12608, 2018.
DOI for A microfluidic control board for high-pressure flow, composition, and relative permittivity
-
A microfluidic relative permittivity sensor for feedback control of carbon dioxide expanded liquid flows
Part of Sensors and Actuators A-Physical, p. 165-172, 2019.
-
A Microfluidic, Reversibly Stretchable, Large-Area Wireless Strain Sensor
Part of Advanced Functional Materials, p. 2282-2290, 2011.
DOI for A Microfluidic, Reversibly Stretchable, Large-Area Wireless Strain Sensor
-
A micromachined dual-axis actuator for Use in a miniaturized optical communication system
Part of Proceeding of the International Astronautical Congress, Sep 29 - Oct 3, Glasgow, Scotland, 2008.
-
A micromachined dual-axis beam steering actuator for use in a miniaturized optical space communication system
Part of Journal of Micromechanics and Microengineering, p. 105007-, 2010.
-
A microstructured magnetoresistive magnetometer for space applications
Part of Proceedings of Micronano System Workshop 2010, Stockholm, Sweden, May 4-5, 2010, 2010.
-
A multi-stable miniature paraffin actuator
Part of Proceedings of Actuator, p. 864-867, 2008.
-
A new test stand for heavy ion induced gas desorption measurements at TSL
Part of Nuclear Instruments and Methods in Physics Research Section A, p. 377-381, 2008.
DOI for A new test stand for heavy ion induced gas desorption measurements at TSL
-
A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement
Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 495-503, 2017.
DOI for A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement Download full text (pdf) of A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement
-
A PCB-like Process for Vertically Configured Thermopiles
Part of Journal of Micromechanics and Microengineering, p. 065021-, 2008.
DOI for A PCB-like Process for Vertically Configured Thermopiles
-
A PDMS-based disposable microfluidic sensor for CD4+ lymphotic counting
Part of Biomedical microdevices (Print), p. 851-857, 2008.
DOI for A PDMS-based disposable microfluidic sensor for CD4+ lymphotic counting
-
A polymer foil non-contact IR temperature sensor with a thermoresistor integrated on the back of a vertically configured thermopile
Part of Sensors and Actuators A-Physical, p. 56-61, 2012.
-
A polymeric paraffin actuated high-pressure micropump
Part of Sensors and Actuators A, p. 88-93, 2006.
-
A polymeric paraffin actuated high-pressure micropump
Part of Sensors and Actuators A: Physical, p. 88-93, 2006.
-
A polymeric paraffin actuated high-pressure micropump
Part of Sensors and Actuators A-Physical, p. 88-93, 2006.
DOI for A polymeric paraffin actuated high-pressure micropump
-
A polymeric paraffin microactuator
Part of Journal of microelectromechanical systems, p. 1172-1177, 2008.
-
A Preliminary Design for a Spherical Inflatable Microrover for Planetary Exploration
Part of Acta Astronautica, p. 618-631, 2008.
DOI for A Preliminary Design for a Spherical Inflatable Microrover for Planetary Exploration
-
A Rapid Prototyping Technique for Microfluidics with High Robustness and Flexibility
Part of Micromachines, 2016.
DOI for A Rapid Prototyping Technique for Microfluidics with High Robustness and Flexibility Download full text (pdf) of A Rapid Prototyping Technique for Microfluidics with High Robustness and Flexibility
Our publications
-
Observation of defect density dependent elastic modulus of graphene .
Applied Physics Letters, 123(5) DOI
(2023).
-
High-Temperature Mechanical and Dynamical Properties of gamma-(U,Zr) Alloys.
Materials, . 16(7) DOI
(2023).
-
High-Order Harmonics Generation in MoS2 Transition Metal Dichalcogenides: Effect of Nickel and Carbon Nanotube Dopants.
International Journal of Molecular Sciences, . 24(7) DOI
(2023).
-
Comparison of high temperature growth versus post-deposition in situ annealing in attaining very low Gilbert damping in sputtered Co2FeAl Heusler alloy films.
Journal of Magnetism and Magnetic Materials, . 519 DOI
(2021).
-
Wear of cemented carbide forging dies used in zipper production.
I Wear of Materials, April 26-28, 2021
(2021).
-
Guided bone tissue regeneration using a hollow calcium phosphate based implant in a critical size rabbit radius defect.
Biomedical Materials, 16(3) DOI
(2021).
-
Towards atomically resolved magnetic measurements in the transmission electron microscope: A study of structure and magnetic moments in thin films.
Diss. Download fulltext
(2020).
-
Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale.
Holzforschung, 74(5): 477-487 DOI
(2020).
-
PDMS leaching and its implications for on-chip studies focusing on bone regeneration applications.
Organs-on-a-Chip, . 2 DOI
(2020).
-
Inorganic Porous Bulk Discs as a Matrix for Thin-Layer Chromatography and Translucent Hard Composite Materials.
ACS Applied Materials and Interfaces, . 12(3): 3727-3735 DOI
(2020).
-
Functional properties of silicon nitride based materials for joint applications.
Diss. Download fulltext
(2020).
-
Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools.
Nordic Pulp & Paper Research Journal, . 35(1): 25-33 DOI
(2020).
-
Direct Writing of Lateral Fluorographene Nanopatterns with Tunable Bandgaps and Its Application in New Generation of Moiré Superlattice.
Applied Physics Reviews, 7 DOI
(2020).
-
Ceramic dental implant with enhanced bioactivity and antibacterial property.
I 11th World Biomaterials Conference
(2020).
-
Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds.
ACS Applied Materials and Interfaces, . 12(6): 7403-7410 DOI
(2020).
-
Towards Quantitative Nanomagnetism in Transmission Electron Microscope by the Use of Patterned Apertures.
Microscopy and Microanalysis, 25(S2): 654-655 DOI
(2019).
-
Quantitative EMCD by use of a double aperture for simultaneous acquisition of EELS.
Ultramicroscopy, 196: 192-196 DOI
(2019).
-
Evaluation of Ionic Interactions of Bone Cement-on-Chip.
I 1st European Organ-on-Chips Society Conference, Graz, July 2-3, 2019
(2019).
-
Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants.
Journal of Biomedical Materials Research. Part B - Applied biomaterials
(2019).
-
Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters.
ACS Applied Materials and Interfaces, 11(9): 8818-8830 DOI
(2019).
-
Nanostructured GaN sensors for Surface Enhanced Raman Spectroscopy.
Materials Science in Semiconductor Processing, 91: 97-101 DOI
(2019).
-
Ion substitution induced formation of spherical ceramic particles.
Ceramics International, . 45(8): 10385-10393 DOI
(2019).
-
ACP-Mg particles for treatment of dental hypersensitivity: a mode of action study.
I Euromat 2019, 1-5 September 2019, Stockholm, Sweden
(2019).
-
Phosphoserine Functionalized Cements Preserve Metastable Phases, and Reprecipitate Octacalcium Phosphate, Hydroxyapatite, Dicalcium Phosphate, and Amorphous Calcium Phosphate, during Degradation, In Vitro.
Journal of Functional Biomaterials, . 10(4) DOI
(2019).
-
Incorporation of strontium and europium in crystals of a-calcium isosaccharinate.
Journal of Hazardous Materials, . 364: 309-316 DOI
(2019).
-
Recombinant silk with calcium phosphates as macroporous bone scaffolds.
I European Congress and Exhibition on advanced materials and processes (EUROMAT 2019), 1-5 September 2019, Stockholm, Sweden
(2019).
-
Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells.
Journal of Tissue Engineering and Regenerative Medicine, . 13(7): 1217-1229 DOI
(2019).
-
Bioactivity testing of dental materials.
Student thesis, 2019 Download fulltext -
Ti-Cu alloys for medical applications.
Student thesis, 2019 Download fulltext -
The Effect of Coating Density on Functional Properties of SiNx Coated Implants.
Materials, 12(20) DOI
(2019).
-
Effect of Deposition Parameters on the Tribocorrosive Performance of Silicon Nitride Based Coatings.
I Scandinavian Society for Biomaterials
(2019).
-
Towards Functional Silicon Nitride Coatings for Joint Replacements.
Coatings, 9(2) DOI
(2019).
-
Tribocorrosive performance of silicon nitride based coatings in a hard-on-soft contact.
I European Congress and Exhibition on Advanced Materials and Processes
(2019).
-
Diamond gratings for dielectric laser acceleration.
I Optics & Photonics in Sweden 2019 (October 16-17, 2019, Stockholm, Sweden)
(2019).
-
Development of titanium-copper alloys for dental applications.
Diss. Download fulltext
(2019).
-
Effect of copper ion concentration on bacteria and cells.
Materials, Switzerland: MDPI. 12(22) DOI
(2019).
-
Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test.
Materials science & engineering. C, biomimetic materials, sensors and systems, . 97: 707-714 DOI
(2019).
-
Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu.
Materials, Switzerland: MDPI. 12(23) DOI
(2019).
-
Investigation of copper alloying in a TNTZ-Cux alloy.
Materials, Switzerland: MDPI. 12(22) DOI
(2019).
-
Characterization of a silica based nano/mesoporous material for adsorption application: A study of the relation between synthesis, structure and adsorption efficiency.
lic.-avh. Download fulltext
(2019).
-
Experimental study of carbides in the Ti-Cr-C system.
Journal of Materials Science, . 54(19): 12358-12370 DOI
(2019).
-
Biosensing platforms using graphene based bioreactive nanostructures with various dimensions.
Diss. Download fulltext
(2019).
-
Graphene Based Mechanical Biosensor by Employing Non-covalent Stacking Functionalization.
Opublicerat manuskript.
(2019).
-
MicroRNA detection based on duplex-specific nuclease-assisted target recycling and gold nanoparticle/graphene oxide nanocomposite-mediated electrocatalytic amplification.
Biosensors & bioelectronics, 127: 188-193 DOI
(2019).
-
Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625.
Wear, . 426-427(Part B): 1837-1845 DOI
(2019).
-
Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production.
Wear, 420: 96-107 DOI
(2019).
-
Cemented carbide wear initiation in sliding contact with iron ore.
I Proceedings of 2nd Sweden-China Symposium on Tribology
(2019).
-
Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock.
International journal of refractory metals & hard materials, 85 DOI
(2019).
-
Designing grinding tools to control and understand fibre release in groundwood pulping.
Diss. Download fulltext
(2019).
-
On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale.
I The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4
(2019).
-
Evaluation of well-defined tool surface designs for groundwood pulping.
BioResources, 14(4): 9575-9587 DOI
(2019).
-
Influences of load and temperature on groundwood pulping with well-defined tools.
Wear, . 438-439 DOI
(2019).
-
Evaluating the interaction between CC-studs and pavement.
Student thesis, 2019 Download fulltext -
Luminescent CeO2:Eu3+ nanocrystals for robust in situ H2O2 real-time detection in bacterial cell cultures.
Biosensors & bioelectronics, . 132: 286-293 DOI
(2019).
-
Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact.
I Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand
(2019).
-
Rolling fatigue life of PM steel with different porosity and surface finish.
Wear, . 426-427(Part A): 454-461 DOI
(2019).
-
Nano-Structure Designing Promotion Osseointegration of Hydroxyapatite Coated Ti-6Al-4V Alloy Implants in Diabetic Model.
Journal of Biomedical Nanotechnology, . 15(8): 1701-1713 DOI
(2019).
-
Thromboinflammation as bioactivity assessment of H2O2-alkali modified titanium surfaces.
Journal of materials science. Materials in medicine, 30(6) DOI
(2019).
-
Radiative emission from Cu2ZnSnS4/ZnSn core/shell nanocrystals.
Journal of Materials Chemistry C, . 7(20): 6129-6133 DOI
(2019).
-
Titanium surface modification to enhance antibacterial and bioactive properties while retaining biocompatibility.
Materials science & engineering. C, biomimetic materials, sensors and systems, 96: 272-279 DOI
(2019).
-
Evaluation of an alkali-treated and hydroxyapatite-coated orthopedic implant loaded with tobramycin.
Journal of biomaterials applications, 34(5): 699-720 DOI
(2019).
-
L- and M-band annular groove phase mask in lab performance assessment on the vortex opticaldemonstrator for coronagraphic applications.
Journal of Astronomical Telescopes, Instruments, and Systems, 5 5(2 2): 1 1-8 8 DOI
(2019).
-
Crack nucleation and propagation in microcrystalline-cellulose based granules subject to uniaxial and triaxial load.
International Journal of Pharmaceutics, 559: 130-137 DOI
(2019).
-
Development of an Ultra-Sensitive Biosensor Based on Mid-Infrared Diamond Waveguide Spectroscopy.
I 2019 MRS Fall Meeting & Exhibit, December 1-6, 2019, Boston, MA,USA
(2019).
-
Diamond waveguide infrared spectroscopy for applications in life science.
I Optics & Photonics in Sweden 2019, October 16-17, 2019, Stockholm, Sweden I
(2019).
-
Seeing the light through diamonds:: Direct detection of extrasolar planets.
I Symposium LATSIS 2019 on Diamond Photonics; Physics, Technologies & Applications May 19-22, 2019, Lausanne, Switzerland
(2019).
-
Friction and wear study of lean powder metallurgy steel in a lubricated sliding contact.
Student thesis, 2019 Download fulltext -
Bone Volume Assessment Around Dental Implants After Open Maxillary Sinus Elevation Surgery: A Quantitative Approach to CBCT Images.
International Journal of Oral & Maxillofacial Implants, . 34(2): 489-498 DOI
(2019).
-
Size-dependent elasticity of gold nanoparticle measured by atomic force microscope based nanoindentation.
Applied Physics Letters, 115(5) DOI
(2019).
-
Direct measurement of the surface energy of single-walled carbon nanotubes through atomic force microscopy.
Journal of Applied Physics, . 126(6) DOI
(2019).
-
Functionalization and patterning of nanocellulose films by surface-bound nanoparticles of hydrolyzable tannins and multivalent metal ions.
Nanoscale, . 11(41): 19278-19284 DOI
(2019).
-
Developmental low-dose exposure to bisphenol A induces chronic inflammation, bone marrow fibrosis and reduces bone stiffness in female rat offspring only.
Environmental Research, 177 DOI
(2019).
-
Strontium-Substituted Dicalcium Silicate Bone Cements with Enhanced Osteogenesis Potential for Orthopaedic Applications.
Materials, . 12(14) DOI
(2019).
-
Adhesive Cements That Bond Soft Tissue Ex Vivo.
Materials, . 12(15) DOI
(2019).
-
Microstructures and mechanical properties of Al2O3/YAG:Ce3+ eutectics with different Ce3+concentrations grown by HDS method.
Journal of Alloys and Compounds
(2019).
-
Rear Optical Reflection and Passivation Using a Nanopatterned Metal/Dielectric Structure in Thin-Film Solar Cells.
IEEE Journal of Photovoltaics, . 9(5): 1421-1427 DOI
(2019).
-
The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness.
Materials, . 12(9) DOI
(2019).
-
Microstructural characterisation and antibacterial properties of Ti-Cu alloys.
I Metals in Medicine .
(2019).
-
Amyloid fibrils prepared using an acetylated and methyl amidated peptide model of the alpha-Synuclein NAC 71-82 amino acid stretch contain an additional cross-beta structure also found in prion proteins.
Scientific Reports, . 9 DOI
(2019).
-
Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test.
Wear, . 426-427(Part B): 1658-1666 DOI
(2019).
-
Initiation and propagation of tool wear in turning of titanium alloys –: evaluated in successive sliding wear test.
I Proceedings of Wear of Materials Conference, Miami, Florida, USA
(2019).
-
Optical and interface properties of direct InP/Si heterojunction formed by corrugated epitaxial lateral overgrowth.
Optical Materials Express, 9(3): 1488-1500 DOI
(2019).
-
Silicon-Nanographite Aerogel-Based Anodes for High Performance Lithium Ion Batteries.
Scientific Reports, . 9 DOI
(2019).
-
Laser Beam Pathway Design and Evaluation for Dielectric Laser Acceleration.
Student thesis, 2019 Download fulltext -
Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems.
Acta Biomaterialia, . 100: 235-243 DOI
(2019).
-
On the diffusion wear of cemented carbides in the turning of AISI 316L stainless steel.
Wear, . 430-431: 202-213 DOI
(2019).
-
Experimental Study of Wear Mechanisms of Cemented Carbide in the Turning of Ti6Al4V.
Materials, 12(17) DOI
(2019).
-
A Methodology to Systematically Investigate the Diffusion Degradation of Cemented Carbide during Machining of a Titanium Alloy.
Materials, . 12(14): 1-17 DOI
(2019).
-
Novel Insights into Regulation of Human Teeth Biomineralization: Deciphering the Role of Post-Translational Modifications in a Tooth Protein Extract.
International Journal of Molecular Sciences, . 20(16) DOI
(2019).
-
Characterization of protein extracts from different types of human teeth and insight in biomineralization.
Scientific Reports, . 9 DOI
(2019).
-
Comparison of Decellularized Cow and Human Bone for Engineering Bone Grafts with Human Induced Pluripotent Stem Cells.
Tissue Engineering. Part A, 25(3-4): 288-301 DOI
(2019).
-
Gentamicin loading of calcium phosphate implants: implications for cranioplasty.
Acta Neurochirurgica, . 161(6): 1255-1259 DOI
(2019).
-
Organics adsorption on novel amorphous silica and silica xerogels: microcolumn rapid breakthrough test coupled with sequential injection analysis.
Journal of Porous Media, . 22(8): 1001-1014 DOI
(2019).
-
Self-Assembled Magnetic Nanoparticle−Graphene Oxide Nanotag for Optomagnetic Detection of DNA.
Acs Applied Nano Materials, . 2(3): 1683-1690 DOI
(2019).
-
The Effect of Al Addition on the Tribological Behavior of Ti-Si-Zr Alloys.
Journal of tribology, 141(4) DOI
(2019).
-
Insights into wear and deformation of alternative binder hardmetals.
Diss. Download fulltext
(2019).
-
Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal.
Materials Characterization, 155 DOI
(2019).
-
Corrosion detection by infrared attenuated total reflection spectroscopy via diamond-like carbon coated silicon wafers and iron-sensitive dyes.
Sensors, 19(15) DOI
(2019).
-
A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation.
International Journal of Solids and Structures, . 168: 211-227 DOI
(2019).
-
A sub 20 nm metal-conjugated molecule junction acting as a nitrogen dioxide sensor.
Nanoscale, 11(14): 6571-6575 DOI
(2019).
-
Integrated thin film resistive sensors for in situ temperature measurements in an acoustic trap.
I Acoustofluidics 2019, 140-141
(2019).
-
Wear mechanisms of tools for exploration drilling.
I Euromat 2019, Stockholm, Sweden, 787-
(2019).
-
Mechanical analyses of trabecular bone and its interaction with implants.
Diss. Download fulltext
(2019).
-
3D analysis of human islet amyloid polypeptide crystalline structures in Drosophila melanogaster.
PLOS ONE, . 14(10) DOI
(2019).
-
Synthesis and Characterization of Amorphous Magnesium Carbonate Nanoparticles.
Materials Chemistry and Physics, . 224: 301-307 DOI
(2019).
-
Enhanced luminous efficacy of transparent Ce3+: YAG ceramics with “light-scattering centres” prepared by uniform Ce:Y2O3 submicron spheres for WLEDs.
Journal of Luminescence, 216 DOI
(2019).
-
An injectable continuous stratified structurally and functionally biomimetic construct for enhancing osteochondral regeneration.
Biomaterials, . 192: 149-158 DOI
(2019).
-
Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites.
Scripta Materialia, 173: 106-109 DOI
(2019).
-
Advanced solid-state H-1/P-31 NMR characterization of pyrophosphate-doped calcium phosphate cements for biomedical applications: The structural role of pyrophosphate.
Ceramics International, . 45(16): 20642-20655 DOI
(2019).
-
The Monetite Structure Probed by Advanced Solid-State NMR Experimentation at Fast Magic-Angle Spinning.
International Journal of Molecular Sciences, . 20(24) DOI
(2019).
-
Cemented injectable multi-phased porous bone grafts for the treatment of femoral head necrosis.
Journal of materials chemistry. B, . 7(18): 2997-3006 DOI
(2019).
-
Development of polymer based composite filaments for 3D printing.
Student thesis, 2019 Download fulltext -
Fatigue performance of a high-strength, degradable calcium phosphate bone cement.
Journal of The Mechanical Behavior of Biomedical Materials, . 79: 46-52 DOI
(2018).
-
Bone Cement Embedded in a Microfluidic Device.
I Micronano System Workshop (MSW), May 13-15, 2018, Aalto University, Espoo, Finland
(2018).
-
Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture.
Acta Biomaterialia, 79: 135-147 DOI
(2018).
-
Synthesis of Ion Substituted Ceramic Core-Shell Particles for Dental Applications.
I 2018 Material Research Society Fall Meeting & Exhibit
(2018).
-
New Impact test method for rock drill inserts.
Student thesis, 2018 Download fulltext -
Slim Moly S makes hydrogen: Layer dependent electrocatalysis in hydrogen evolution reaction with individual MoS2 nanodevices.
Student thesis, 2018 Download fulltext -
Novel Fast-Setting Mineral Trioxide Aggregate: Its Formulation, Chemical-Physical Properties, and Cytocompatibility.
ACS Applied Materials and Interfaces, . 10(24): 20334-20341 DOI
(2018).
-
Eu3+ doped monetite and its use as fluorescent agent for dental restorations.
Ceramics International, . 44(9): 10510-10516 DOI
(2018).
-
Preparation of magnetic MnFe2O4-Cellulose aerogel composite and its kinetics and thermodynamics of Cu(II) adsorption.
Cellulose, . 25(1): 735-751 DOI
(2018).
-
Joint academic and industrial efforts towards innovative and efficient solutions for clinical needs.
Journal of materials science. Materials in medicine, . 29(8) DOI
(2018).
-
The Multiple Faces of Interfaces: Electron microscopy analysis of CuInSe2 thin-film solar cells.
Diss. Download fulltext
(2018).
-
Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects.
Advanced Healthcare Materials, . 7(5) DOI
(2018).
-
Protective Tribofilms on Combustion Engine Valves.
Diss. Download fulltext
(2018).
-
Surface texturing to promote formation of protective tribofilms on combustion engine valves.
Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, . 232(1): 54-61 DOI
(2018).
-
On the dramatic wear protecting effect of tribofilms on wear of combustion engine valves.
I The 18th Nordic Symposium on Tribology - Nordtrib 2018, Uppsala, Sweden, June 18-21, 2018
(2018).
-
Evaluation of mechanical and microstructural properties for laser powder-bed fusion 316L.
Student thesis, 2018 Download fulltext -
Composition, structure and magnetic properties of ultra-thin Fe/Ni multilayers sputter deposited on epitaxial Cu/Si(001).
Thin Solid Films, 646: 117-125 DOI
(2018).
-
Spark plasma sintered ZrO2-SiO2 glass ceramics and Si3N4 bioceramics.
Diss. Download fulltext
(2018).
-
Spark plasma sintering of biodegradable Si3N4 bioceramic with Sr, Mg and Si as sintering additives for spinal fusion.
Journal of the European Ceramic Society, 38(4): 2110-2119 DOI
(2018).
-
Ultrastrong translucent glass ceramic with nanocrystalline, biomimetic structure.
Nano letters (Print), 18(11): 7146-7154 DOI
(2018).
-
Biodegradable Si3N4 bioceramic sintered with Sr, Mg and Si for spinal fusion: Surface characterization and biological evaluation.
Applied Materials Today, 12: 260-275 DOI
(2018).
-
Micro-CT as a tool to study crack initiation and propagation in ceramic bone cements.
I 8th World Congress of Biomechanics, Dublin
(2018).
-
Case Study of a Green Nanoporous Material from Synthesis to Commercialisation: Quartzene®.
Current Opinion in Green and Sustainable Chemistry, . 12: 101-109 DOI
(2018).
-
Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials.
Wear, . 398-399: 227-235 DOI
(2018).
-
Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact.
Tribology International, 121: 1-9 DOI
(2018).
-
Study of the wear mechanisms for drill bits used in core drilling.
Student thesis, 2018 Download fulltext -
Sensing Glucose in Human Saliva with Mid-Infrared Broadly Tunable Quantum Cascade Lasers and Polycrystalline Diamond Waveguides.
I EUROPT(R)ODE XIV Naples 2018, CONFERENCE ON OPTICAL CHEMICAL SENSORS AND BIOSENSORS (March 25-28, 2018, Naples, Italy)
(2018).
-
Polycrystalline diamond thin-film waveguides for mid-infrared evanescent field sensors.
ACS Omega, 3(6): 6190-6198 DOI
(2018).
-
Infrared Spectroscopy Based on Broadly Tunable Quantum Cascade Lasers and Polycrystalline Diamond Waveguides.
The Analyst, 143(21): 5112-5119 DOI
(2018).
-
Detecting forensic substances using commercially available SERS substances and handheld Raman spectrometers.
Talanta, . 189: 649-652 DOI
(2018).
-
Rolling contact fatigue test performed on additively manufactured inconel 718 produced by selective laser melting.
I 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018 .
(2018).
-
Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire.
I The 18th Nordic Symposium on Tribology, Nordtrib, June 18-21, Uppsala, Sweden
(2018).
-
Initial surface failure and wear of cemented carbides in sliding contact with different rock types.
Wear, 408-409: 43-55 DOI
(2018).
-
On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip.
International journal of refractory metals & hard materials, 77: 141-151 DOI
(2018).
-
Influences of grinding surface alignment in groundwood pulping of Norway spruce.
I 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21
(2018).
-
Cellular-Resolution Imaging of Microstructures in Rat Bone using Laboratory Propagation-Based Phase-Contrast X-ray Tomography.
I Proceedings of the 14th International Conference on X-ray Microscopy (XRM2018) DOI
(2018).
-
Wear and degradation of Co, Fe and Ni-based cemented carbides against sandstone and granite.
Student thesis, 2018 Download fulltext -
Bioactive Coatings and Antibacterial Approaches for Titanium Medical Implants.
Diss. Download fulltext
(2018).
-
Debridement of Bacterial Biofilms with TiO2/H2O2 Solutions and Visible Light Irradiation.
International Journal of Biomaterials, . 2018 DOI
(2018).
-
Porous Fractals of MAPbI3 Perovskite: Characterization of Crystal Grain Formation by Irreversible Diffusion-Limited Aggregation.
I Materials Research Society Fall Meeting & Exhibit, November 25-30, 2018, Boston, Massachusetts, USA, 1133-
(2018).
-
Evaulation of liquid-exfoliatedgraphene as additive in Ag-basedsliding contacts.
Student thesis, 2018 Download fulltext -
NEAR: New Earths in the Alpha Cen Region (bringing VISIR as a "visiting instrument" to ESO-VLT-UT4).
I Evans, CJ Simard, L Takami, H (red.) Ground-Based And Airborne Instrumentation For Astronomy VII DOI
(2018).
-
Study of tool wear and chemical interaction during machining of Ti6Al4V.
International journal of refractory metals & hard materials, 72: 253-256 DOI
(2018).
-
High contrast imaging for the enhanced resolution imager and spectrometer (ERIS).
I Evans, CJ Simard, L Takami, H (red.) GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY VII . DOI
(2018).
-
Reinforcing Mucus Barrier Properties with Low Molar Mass Chitosans.
Biomacromolecules, . 19(3): 872-882 DOI
(2018).
-
Role of Infrared Spectroscopy and Imaging in Cancer Diagnosis.
Current Medicinal Chemistry, . 25(9): 1055-1072 DOI
(2018).
-
Tribofilm formation of a boric acid fuel additive – Investigation of tribofilm properties.
I The 18th Nordic Symposium on Tribology, Nordtrib 2018, June 18-21, 2018, Uppsala, Sweden
(2018).
-
Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving.
Tribology International, . 128: 302-312 DOI
(2018).
-
Evaluation of bioactive cranial implants: preliminary results from volumetric quantifications using computed tomography (CT).
I 8th World Congress of Biomechanics, 2018 Dublin
(2018).
-
Longitudinal assessment of trends in calcium phosphate degradation for cranial implants: preliminary results from two patients.
I The Scandinavian Society for Biomaterials 2018, 11th annual meeting
(2018).
-
Superior adhesion of graphene nanoscrolls.
Communications Physics, 1 DOI
(2018).
-
In-Situ Bone Regeneration Of Cranial Defects Using Synthetic Ceramic Implant.
Journal of Neurotrauma, . 35(16): A79-A80
(2018).
-
Nanoresolution patterning of hydrogenated graphene by electron beam induced C-H dissociation.
Nanotechnology, 29(41) DOI
(2018).
-
Observation and characterisation of the surface hardness enhancement of the laser remelted NiCrBSi coating.
International Journal of Surface Science and Engineering, 12(4): 336-346 DOI
(2018).
-
Experimental observation of size-dependent behavior in surface energy of gold nanoparticles through atomic force microscope.
Applied Physics Letters, . 113(8) DOI
(2018).
-
Calcium Phosphate Based Biomaterials for Bone Augmentation.
Diss. Download fulltext
(2018).
-
A ready-to-use acidic, brushite-forming calcium phosphate cement.
Acta Biomaterialia, 81: 304-314 DOI
(2018).
-
Spallation failure of silicon nitride coatings upon dissolution in fetal bovine serum.
I 18th Nordic Symposium on Tribology
(2018).
-
Morphology and adhesion of silicon nitride coatings upon soaking in fetal bovine serum.
I P. R. Fernandes and J. M. Tavares (red.) 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, Lisbon, March 26-29, 2018
(2018).
-
Additivt tillverkade aluminiumkomponenter: Hållfasthetsegenskaper och materialkarakterisering.
Student thesis, 2018 Download fulltext -
High resolution STEM investigation of interface layers in cemented carbides.
International journal of refractory metals & hard materials, 72: 135-140 DOI
(2018).
-
Calcium Phosphate Microspheres as a Delivery Vehicle for Tooth-Bleaching Agents.
Journal of Dental Research, . 97(3): 283-288 DOI
(2018).
-
Ion Transport beyond the Polyether Paradigm: Introducing Oligocarbonate Ion Transporters for Efficient Light-Emitting Electrochemical Cells.
Advanced Functional Materials, . 28(32) DOI
(2018).
-
Non-setting, injectable biomaterials containing particulate hydroxyapatite can increase primary stability of bone screws in cancellous bone.
Clinical Biomechanics, 59: 174-180 DOI
(2018).
-
Effect of strontium surface-functionalized implants on early and late osseointegration: A histological, spectrometric and tomographic evaluation.
Acta Biomaterialia, 69: 385-394 DOI
(2018).
-
Tribology for Greener Combustion Engines: Scuffing in Marine Engines and a Lubricating Boric Acid Fuel Additive.
Diss. Download fulltext
(2018).
-
Conjugation of cyclodextrin to magnetic Fe3O4 nanoparticles via polydopamine coating for drug delivery.
Progress in organic coatings, 114: 154-161 DOI
(2018).
-
Stiffness and strength of cranioplastic implant systems in comparison to cranial bone.
Journal of Cranio-Maxillofacial Surgery, 46(3): 418-423 DOI
(2018).
-
Birefringence measurements of diamond space-variant subwavelength gratings.
Applied Optics, 57(17): 4909-4917 DOI
(2018).
-
Development of a diamond waveguide sensor for sensitive protein analysis using IR quantum cascade lasers.
I Yakov G. Soskind (red.) SPIE Proceedings Volume 10539 DOI
(2018).
-
Polarization analysis of diamond subwavelength gratings acting as space-variant birefringent elements.
I Yakov G. Soskind (red.) SPIE Proceedings Volume 10539 DOI
(2018).
-
A new ex-vivo murine model for evaluation of adhesiveness of a novel biomimetic bone glue.
I 34th Annual Meeting of Orthopaedic Trauma association, October 17 – 20, 2018, Kissimmee (Orlando), FL, USA
(2018).
-
Designing A Commercial Biomaterial For A Specific Unmet Clinical Need –: An Adhesive Odyssey.
I 26th EORS Annual Meeting 25th – 28th September 2018, Galway, Ireland
(2018).
-
A Novel Class of Injectable Bioceramics that Glue Tissues and Biomaterials.
Materials, 11(12) DOI
(2018).
-
Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out.
Journal of The Mechanical Behavior of Biomedical Materials, . 77: 624-633 DOI
(2018).
-
Rapid precipitation of Mg-doped fluoride-based submicron spheres and evolution study.
Journal of Solid State Chemistry, 142-146
(2018).
-
A novel rapid synthesis, characterization and applications of calcium phosphate nanospheres from Baltic seawater.
Ceramics International, . 44(8): 9076-9079 DOI
(2018).
-
Hydrogen bond-assisted synthesis of MoS2/reduced graphene oxide composite with excellent electrochemical performances for lithium and sodium storage.
Journal of Colloid and Interface Science, . 512: 826-833 DOI
(2018).
-
Discovery of a point-like source and a third spiral arm in the transition disk around the Herbig Ae star MWC 758.
Astronomy and Astrophysics, . 611 DOI
(2018).
-
Bone-compliant cements for vertebral augmentation.
Diss. Download fulltext
(2018).
-
In vivo response to a low-modulus PMMA bone cement in an ovine model.
Acta Biomaterialia, . 72: 362-370 DOI
(2018).
-
Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty.
Journal of The Mechanical Behavior of Biomedical Materials, . 82: 70-76 DOI
(2018).
-
Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid.
Tribology International, 118: 465-473 DOI
(2018).
-
Ageing tests of cemented carbide powders: An investigation for increased quality of metal cutting inserts.
Student thesis, 2018 Download fulltext -
A FTIRM study of the interactive effects of metals (zinc, copper and cadmium) in binary mixtures on the biochemical constituents of the gills in rainbow trout (Oncorhynchus mykiss).
Comparative Biochemistry and Physiology - Part C, . 211: 48-56 DOI
(2018).
-
Wear Behaviour of Two Different Cemented Carbide Grades in Turning 316 L Stainless Steel.
I Shabadi, R Ionescu, M Jeandin, M Richard, C Chandra, T (red.) THERMEC 2018, . 2367-2372 DOI
(2018).
-
Combining Electrospinning And 3D Printing For A New Generation Of Nerve Guides.
Cytotherapy, 20(5): S15-S15
(2018).
-
Pitfalls in environmental endurance testing of electrical connectors – problem overview and discussion.
I 29th International conference on electrical contacts together with 64th IEEE Holm conference on electrical contacts. October 2018, Albuquerque, USA.
(2018).
-
Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion.
I Proceedings of 2018 29th International Conference on Electrical Contacts and 64th IEEE Holm Conference on Electrical Contacts, . 475-482 DOI
(2018).
-
Quantitative overview and clarification of hot hardness.
Student thesis, 2018 -
Compositional Dependence Of Hardness And Modulus Of Sinfec Coatings.
I P. R. Fernandes and J. M. Tavares (red.) 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, Lisbon, Portugal 26-29 March, 2018
(2018).
-
Combinatorial coating development of Si-N-Fe-C coatings for joint implants.
I 29th Annual Congress of the European Society for Biomaterials, Masstricht, 11-13 April, 2018 .
(2018).
-
Biocompatibility of co-sputtered Si-Fe-C-N coatings.
I 11th annual meeting, Scandinavian Society for Biomaterials, Gullmarsstrand, 25-27 April, 2018
(2018).
-
Engineering human bone grafts with new macroporous calcium phosphate cement scaffolds.
Journal of Tissue Engineering and Regenerative Medicine, 12(3): 715-726 DOI
(2018).
-
Boric acid as a lubricating additive in fuels and in hydraulic oils.
Student thesis, 2018 Download fulltext -
Effect of nanosectioning on surface features and stiffness of an amorphous glassy polymer.
Polymer Engineering and Science, 58(10): 1849-1857 DOI
(2018).
-
Injectable nano-structured silicon-containing hydroxyapatite microspheres with enhanced osteogenic differentiation and angiogenic factor expression.
Ceramics International, 44(16): 20457-20464 DOI
(2018).
-
Abrasion resistance of new wear resistant AM steels.
I 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018 .
(2018).
-
Near-infrared light-activated red-emitting upconverting nanoplatform for T-1-weighted magnetic resonance imaging and photodynamic therapy.
Acta Biomaterialia, . 74: 360-373 DOI
(2018).
-
Novel hydrophilic and hydrophobic amorphous silica: Characterization and adsorption of aqueous phase organic compounds.
Adsorption Science and Technology, . 36(1-2): 327-342 DOI
(2018).
-
Comparison of test methods estimating the stiffness of ultrathin coatings.
Journal of Coatings Technology and Research, 15(4): 743-752 DOI
(2018).
-
MicroRNA Detection through DNAzyme-Mediated Disintegration of Magnetic Nanoparticle Assemblies.
ACS Sensors, 3 3: 1884 1884-1891 1891 DOI
(2018).
-
Microstructure investigations of WC-Co cemented carbide containing Eta-phase and Cr.
Student thesis, 2018 Download fulltext -
Bioceramic microneedle arrays are able to deliver OVA to dendritic cells in human skin.
Journal of materials chemistry. B, 6(42): 6808-6816 DOI
(2018).
-
Digital Volume Correlation using Quartic FEM Interpolation and Global Optimization.
I 6th European Conference on Computational Mechanics (ECCM 6), 11-15 June, Glasgow, UK .
(2018).
-
Microfabrication of Optical Components in Synthetic Diamond: Infrared Optics for Applications in Astronomy and Spectroscopy.
Diss. Download fulltext
(2018).
-
Subwavelength diamond gratings for vortex coronagraphy: towards annular groove phase mask for shorter wavelengths and topological charge 4 designs.
Optical Materials Express, 8(7): 1976-1987 DOI
(2018).
-
Tailoring the Thermal and Mechanical Properties of Graphene Film by Structural Engineering.
Small, 14(29) DOI
(2018).
-
Fabrication, functionalization and electrical conductance modulation of nanoparticle based molecular electronic Nano-devices.
Diss. Download fulltext
(2018).
-
On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels.
Tribology letters, . 66(3) DOI
(2018).
-
Abrasion resistance of drill bit steels in flowing saltwater.
I 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018 .
(2018).
-
On the use of spectra from portable Raman and ATR-IR instruments in synthesis route attribution of a chemical warfare agent by multivariate modeling.
Talanta, . 186: 622-627 DOI
(2018).
-
Young’s modulus of trabecular bone at the tissue level: A review.
Acta Biomaterialia, 78: 1-12 DOI
(2018).
-
Injectable bone graft.
Pat. 201811106922.5
(2018).
-
A transdermal drug administration device.
Pat. JP2018513121A
(2018).
-
A transdermal drug administration device.
Pat. US20180049976A1
(2018).
-
Hollow calcium phosphate particles.
Pat. EP2976111B1 (2018-11-14)
(2018).
-
Hollow calcium phosphate particles.
Pat. CN105392504B (2018-07-27)
(2018).
-
Hollow calcium phosphate particles.
Pat. JP6348570B2 (2018-06-27)
(2018).
-
Translucent nanocrystalline glass ceramic.
Pat. WO2018093322A1
(2018).
-
Amorphous Magnesium Carbonate Nanoparticles with Strong Stabilizing Capability for Amorphous Ibuprofen.
International Journal of Pharmaceutics, . 548(1): 515-521 DOI
(2018).
-
Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact.
Wear, 388-389: 9-17 DOI
(2017).
-
Can Bone Void Fillers Carry Load?: Behaviour of Calcium Phosphate Cements Under Different Loading Scenarios.
Diss. Download fulltext
(2017).
-
Elastic properties and strain-to-crack-initation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique.
Journal of The Mechanical Behavior of Biomedical Materials, 74: 428-437 DOI
(2017).
-
Fatigue life of a brushite cement under cyclic compressive loading.
I 29th Bioceramic symposium, Toulouse (France)
(2017).
-
Mechanical Properties of Brushite Calcium Phosphate Cements.
I Shi, D. (red.) The World Scientific Encyclopedia of Nanomedicine and Bioengineering II: Bioimplants, Regenerative Medicine, and Nano-Cancer Diagnosis and Phototherapy Singapore: World Scientific Pte Ltd..
(2017).
-
Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition.
Journal of materials science. Materials in medicine, 28(3) DOI
(2017).
-
An electron energy loss spectrometer based streak camera for time resolved TEM measurements.
Ultramicroscopy, 176: 5-10 DOI
(2017).
-
Low molar excess of 4-oxo-2-nonenal and 4-hydroxy-2-nonenal promote oligomerization of alpha-synuclein through different pathways.
Free Radical Biology & Medicine, 110: 421-431 DOI
(2017).
-
Towards Fingermark Dating: A Raman Spectroscopy Proof-of-Concept Study.
ChemistryOpen, 6(6): 706-709 DOI
(2017).
-
Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture.
ACS Applied Materials and Interfaces, 9(48): 41722-41736 DOI
(2017).
-
Nanostructured Calcium Phosphate Scaffolds Trigger Osteoinduction and Osteogenesis.
I ED-IADR/NOF Oral Health Research Congress, Vienna
(2017).
-
Designing sterically demanding thiolate coated AuNPs for electrical characterization of BPDT in a NP-molecule-nanoelectrode platform.
Molecular Systems Design & Engineering , . 2(2): 133-139 DOI
(2017).
-
Realizing diamond subwavelength gratings working in the near infrared wavelength region.
I The International New Diamond and Nano Carbons Conference – NDNC 2017 (May 28-June 1, 2017, Cairns, Australia)
(2017).
-
Crystal perfection by strain engineering: The case of Fe/V (001).
Thin Solid Films, 636: 608-614 DOI
(2017).
-
Heparinisation as a tool to modulate osteoclastogenesis on calcium phosphates.
I Bioceramics 29, Toulouse, 2017
(2017).
-
Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures.
Wear, 376-377: 1429-1436 DOI
(2017).
-
Titanium-Copper alloy as an antibacterial biomaterial.
I Titanium-Copper alloy as an antibacterial biomaterial
(2017).
-
Highly translucent and strong ZrO2-SiO2 nanocrystalline glass ceramic prepared by sol-gel method and spark plasma sintering with fine 3D microstructure for dental restoration.
Journal of the European Ceramic Society, 37: 4067-4081 DOI
(2017).
-
Preparation of High Percentage α-Calcium SulfateHemihydrate via a Hydrothermal Method.
Journal of Biomaterials and Nanobiotechnology, 8: 36-49 DOI
(2017).
-
A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement.
Journal of The Mechanical Behavior of Biomedical Materials, 75: 495-503 DOI
(2017).
-
Long-term degradation of novel multiphasic calcium phosphate cements.
I 29th Bioceramic symposium, Toulouse (France)
(2017).
-
Allergen-loaded strontium-doped hydroxyapatite spheres improve allergen-specific immunotherapy in mice.
Allergy. European Journal of Allergy and Clinical Immunology, 72(4): 570-578 DOI
(2017).
-
Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties.
Surface & Coatings Technology, . 315: 80-87 DOI
(2017).
-
VIP: Vortex Image Processing Package for High-contrast Direct Imaging.
Astronomical Journal, 154(1) DOI
(2017).
-
Tribology of Metal-Graphite Composites: A Study of Sliding Electrical Contact Surfaces.
Diss. Download fulltext
(2017).
-
Hand-Held Femtogram Detection of Hazardous Picric Acid with Hydrophobic Ag Nanopillar SERS Substrates and Mechanism of Elasto-Capillarity.
ACS SENSORS, . 2(2): 198-202 DOI
(2017).
-
Dielectric laser accelerator investigation, setup substrate manufacturing and investigation of effects of laser induced electromigration rf cavity breakdown influences.
I Proceedings of the 8th International Particle Accelerator Conference (IPAC 2017), Copenhagen, Denmark, May, 2017
(2017).
-
Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test.
International journal of refractory metals & hard materials, 64: 7-13 DOI
(2017).
-
Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements.
I 21st International Conference on Wear of Materials, Long Beach, March 26-30
(2017).
-
Wear and degradation of rock drill buttons with alternative binder phase in granite and sandstone.
Student thesis, 2017 Download fulltext -
Stem cell-mediated functionalization of titanium implants.
Journal of materials science. Materials in medicine, 28(9) DOI
(2017).
-
Effect of irradiated TiO2/H2O2 suspensions on Staphylococcus epidermidis biofilm.
I 10th annual meeting for Scandinavian Society for Biomaterials (ScSB) 2017
(2017).
-
Effect of irradiated TiO2/H2O2 suspensions on Staphylococcus epidermidis biofilm.
European Cells and Materials
(2017).
-
Organic degradation potential of a TiO2/H2O2/UV-Vis system for dental applications.
Journal of Dentistry, 67: 53-57 DOI
(2017).
-
Trabecular deformations during screw pull-out: a micro-CT study of lapine bone.
Biomechanics and Modeling in Mechanobiology, . 16(4): 1349-1359 DOI
(2017).
-
Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography.
Industrial crops and products (Print), . 95: 43-49 DOI
(2017).
-
Examination of wear damage to rock-mining hardmetal drill bits.
International journal of refractory metals & hard materials, 66: 1-10 DOI
(2017).
-
Debatt: Falu gruvas 1,9 miljarder år gamla geologiska processer kan säkra samhällets framtida behov av metaller.
Dala-Demokraten
(2017).
-
Protein analysis by label free evanescent mid-IR diamond waveguide spectroscopy.
I 2017 MRS Fall Meeting & Exhibit (November 26-December 1, 2017, Boston, USA)
(2017).
-
Diamond coronagraphs for direct detection of extrasolar planets.
I EOS Topical Meeting on Diffractive Optics 2017, DO2017 (September 4-7, 2017, Joensuu, Finland)
(2017).
-
Thermoelectric Cooler Prototype Based on Bismuth Telluride and Aimed for Space Applications.
Student thesis, 2017 Download fulltext -
In vitro and in vivo investigation of bisphosphonate-loaded hydroxyapatite particles for peri-implant bone augmentation.
Journal of Tissue Engineering and Regenerative Medicine, 11(7): 1974-1985 DOI
(2017).
-
Evolution of brain region volumes during artificial selection for relative brain size.
Evolution, 71(12): 2942-2951 DOI
(2017).
-
Photophysics of Coumarin and Carbostyril-Sensitized Luminescent Lanthanide Complexes: Implications for Complex Design in Multiplex Detection.
Journal of the American Chemical Society, . 139(16): 5756-5767 DOI
(2017).
-
Experimental evaluation of contact stiffness and damping to sustain transients and resonances.
I ICTT 2017: 19th International Conference on Tribology technology, Toronto, Canada
(2017).
-
Insights into Biochemical Alteration in Cancer-Associated Fibroblasts by using Novel Correlative Spectroscopy.
ChemistryOpen, . 6(1): 149-157 DOI
(2017).
-
Grease lubricated fretting of silver coated copper electrical contacts.
Wear, 376: 634-642 DOI
(2017).
-
Grease lubricated fretting of silver coated copper electrical contacts.
I 21st International Conference on Wear of Materials
(2017).
-
Grease lubricated fretting - Influence of base oil viscosity and material combination.
I Society of tribologists and lubrication engineers 72nd Annual Meeting & Exhibition
(2017).
-
Boric acid as a lubricating fuel additive: Optimization of a lab test to understand fuel consumption reduction in field tests.
I Society of tribologists and lubrication engineers (STLE) 72nd Annual Meeting & Exhibition, 21–25 May 2017, Atlanta, Georgia, USA, 1-1
(2017).
-
Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test.
I 21st International Conference on Wear of Materials
(2017).
-
Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test.
Wear, 376: 822-830 DOI
(2017).
-
Assessment of bone formation in CaP scaffolds – µCT method development.
I 29th Bioceramic symposium, Toulouse (France)
(2017).
-
Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM.
Biomedical Materials, . 12(6) DOI
(2017).
-
Quantification of radiological changes around dental implants:: a CBCT image analysis.
I The 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and the 3rd Conference on Imaging and Visualization, 2017, Lisbon, Portugal
(2017).
-
Guided Growth of Auditory Neurons: Bioactive Particles Towards Gapless Neural - Electrode Interface.
Biomaterials, 122: 1-9 DOI
(2017).
-
Enhanced gas sensing performance of graphene/ZnS-CdS hetero-nanowires gas sensor synthesized by Langmuir-Blodgett self-assembly method.
Journal of Physics Conference Series, 922 922 DOI
(2017).
-
Tribology of polymer composites for elevated temperature applications.
lic.-avh. Download fulltext
(2017).
-
Fretting behavior of PP grease lubricated PPS and PA composites.
I 6th European conference on tribology, EcoTrib 2017
(2017).
-
Excessive dietary intake of vitamin A reduces skull bone thickness in mice.
PLOS ONE, 12(4) DOI
(2017).
-
Friction dissipation under tangential high freequency excitation.
I World tribology congress 2017, Beijing, China
(2017).
-
Merging Electrohydrodynamic Printing and Electrochemistry: Sub-micronscale 3D-printing of Metals.
Student thesis, 2017 Download fulltext -
Numerical and experimental analysis of thermal and mechanical behavior of NiCrBSi coatings during the plasma spray process.
Journal of Materials Processing Technology, . 249: 471-478 DOI
(2017).
-
Superionic Conductivity of Sm3+, Pr3+, and Nd3+ Triple-Doped Ceria through Bulk and Surface Two-Step Doping Approach.
ACS Applied Materials and Interfaces, . 9(28): 23614-23623 DOI
(2017).
-
Selenium- and tellurium-based antioxidants for modulating inflammation and effects on osteoblastic activity.
Antioxidants, 6(13): 1-13 DOI Download fulltext
(2017).
-
White-light photoassisted covalent functionalization of graphene using 2-propanol.
Small Methods, . 1(11) DOI
(2017).
-
In-situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth.
ACS Applied Materials and Interfaces, 9(41): 36392-36399 DOI
(2017).
-
In-situ analysis of the fast setting reaction of brushite cement.
I 29th Symposium and Annual Meeting of the International Society for Ceramics in Medicine
(2017).
-
Characterization of the inner disk around HD 141569 A from KECK/NIRC2 L-band vortex coronagraphy.
Astronomical Journal, 153(1): 1-10 DOI
(2017).
-
Discovery of a low-mass companion inside the debris ring surrounding the F5V star HD 206893.
Astronomy and Astrophysics, 597 DOI
(2017).
-
Electrolytes for High-Brightness, High-Efficiency Light-Emitting Electrochemical Cells: Going from Polymers to Oligomers.
I The 15th Pacific Polymer Conference (PPC-15)
(2017).
-
Long-term sensory disturbances after orbitozygomatic fractures.
Journal of Plastic, Reconstructive & Aesthetic Surgery, . 70: 120-126 DOI
(2017).
-
Modified PMMA for osteoporotic vertebral fracture - reason for a better suited PMMA cement for fragile bone..
I Interdisciplinary Research Society for Bone and Joint Injectable Biomaterials (GRIBOI) 2017, Athens
(2017).
-
Synthesis of solid solution TiBN coatings by cathodic arc evaporation.
Student thesis, 2017 Download fulltext -
Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining.
Wear, 376: 115-124 DOI
(2017).
-
Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling.
Wear, . 388-389: 81-92 DOI
(2017).
-
Polarization analysis of a space-variant birefringent plate made of diamond subwavelength gratings.
I Hasselt Diamond Workshop – 2017 SBDD XXII (March 8-10, 2017, Hasselt, Belgium)
(2017).
-
The biological and physical performance of high strength dicalcium phosphate cement in physiologically relevant models.
Diss. Download fulltext
(2017).
-
The Influence of Hydroxyapatite Nanoparticle Morphology on Embryonic Development in a Zebrafish Exposure Model.
Nanomaterials, 7(4) DOI
(2017).
-
Incorporation and delivery of an organoselenium antioxidant from a brushite cement.
Materials letters (General ed.), 197: 115-119 DOI
(2017).
-
A novel method to synthesize low-cost phosphate-based particles from natural water.
Materials letters (General ed.), 206: 178-181 DOI
(2017).
-
The formation of calcium fluoride microspheres via solubility equilibrium.
Ceramics International, . 43(16): 14521-14524 DOI
(2017).
-
Template-free synthesis of phosphate-based spheres via modified supersaturated phosphate buffer solutions.
Journal of materials science. Materials in medicine, . 28(7) DOI
(2017).
-
A novel method to synthesize low-cost magnesium fluoride spheres from seawater.
Ceramics International, . 43(16): 14481-14483 DOI
(2017).
-
A general strategy for template-free and low-cost synthesis of inorganic hollow spheres.
Powder Technology, 319: 163-171 DOI
(2017).
-
Localization of magnetic circular dichroic spectra in transmission electron microscopy experiments with atomic plane resolution.
Physical Review B, . 95(17) DOI
(2017).
-
Influence of CVD and PVD coating micro topography on the initial material transfer of 316L stainless steel in sliding contacts: A laboratory study.
Wear, . 388-389: 29-38 DOI
(2017).
-
The W. M. Keck Observatory infrared vortex coronagraph and a first image of HIP79124 B.
Astronomical Journal, 153(1): 1-7 DOI
(2017).
-
Micrometre-sized magnesium whitlockite crystals in micropetrosis of bisphosphonate-exposed human alveolar bone.
Nano letters (Print), 17(10): 6210-6216 DOI
(2017).
-
Nitro-, Azo-, and Amino Derivatives of Ebselen: Synthesis, Structure, and Cytoprotective Effects.
Journal of Organic Chemistry, 82(1): 313-321 DOI
(2017).
-
Case depth measurements on inductionhardened crankshafts by using ultrasonic backscattering method.
Student thesis, 2017 Download fulltext -
Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements.
Materials, . 10(2) DOI
(2017).
-
The usage of data compression for the background estimation of electron energy loss spectra.
Ultramicroscopy, . 181: 117-122 DOI
(2017).
-
Analysis of electron energy loss spectroscopy data using geometric extraction methods.
Ultramicroscopy, 174: 14-26 DOI
(2017).
-
Polymer fracture and deformation during nanosectioning in an ultramicrotome.
Engineering Fracture Mechanics, 182: 595-606 DOI
(2017).
-
Rate effects on localized shear deformation during nanosectioning of an amorphous thermoplastic polymer.
International Journal of Solids and Structures, 129: 40-48 DOI
(2017).
-
Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning.
Composites Science And Technology, 153: 95-102 DOI
(2017).
-
Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films.
I 13th Coatings Science International - COSI 2017, Noordwijk, The Netherlands on 26 – 30 June
(2017).
-
Chemically and morphologically distinct grain boundaries in Ge-doped Cu2ZnSnSe4 solar cells revealed with STEM-EELS.
Materials & design, 122: 102-109 DOI
(2017).
-
Towards sub-nanometer real-space observation of spin and orbital magnetism at the Fe/MgO interface.
Scientific Reports, . 7 DOI
(2017).
-
Classification and Effects of Implant Surface Modification on the Bone: Human Cell-Based In Vitro Studies.
Journal of Oral Implantology, . 43(1): 58-83 DOI
(2017).
-
Alternative binder hardmetals for steel turning.
lic.-avh. Download fulltext
(2017).
-
Life time of cemented carbide inserts with Ni-Fe binder in steel turning.
Wear, 376: 1822-1829 DOI
(2017).
-
Life time of cemented carbide inserts with Ni-Fe binder in steel turning.
I 21st International Conference on Wear of Materials
(2017).
-
Investigation of Cemented Carbides with Alternative Binders after CVD Coating.
International journal of refractory metals & hard materials, 62: 225-229 DOI
(2017).
-
Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts.
I 19th Plansee Seminar 2017
(2017).
-
Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues.
Soft Matter, 13(21): 3936-3945 DOI
(2017).
-
Reducing the feature size of diamond subwavelength gratings.
I Hasselt Diamond Workshop – 2017 SBDD XXII (March 8-10, 2017, Hasselt, Belgium)
(2017).
-
Semiconductor-ionic Membrane of LaSrCoFe-oxide-doped Ceria Solid Oxide Fuel Cells.
Electrochimica Acta, 248: 496-504 DOI
(2017).
-
Fundamental friction phenomena and applied studies on tribological surfaces.
lic.-avh. Download fulltext
(2017).
-
Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models.
I 23rd Congress of the European Society of Biomechanics, Seville, 2-5 July,2017
(2017).
-
Strategy towards cost-effective low-temperature solid oxide fuel cells: A mixed-conductive membrane comprised of natural minerals and perovskite oxide.
Journal of Power Sources, . 342: 779-786 DOI
(2017).
-
Design of bioactive materials for bone repair and regeneration.
(2017).
-
Biological effect of ions in calcium phosphates on bone regeneration.
I Design of bioactive materials for bone repair and regeneration .
(2017).
-
Critical cracking thickness of calcium phosphates biomimetic coating: Verification via a Singh-Tirumkudulu model.
Ceramics International, 43: 15729-15734 DOI
(2017).
-
Si3N4 ceramic for orthopedic applications.
Pat. 1700194-2
(2017).
-
Electron tomography analysis of Islet Amyloid Poly-Peptide aggregates in drosophila melanogaster.
I Microscope Conference
(2017).
-
Electron tomography analysis of 3D interfacial nanostructures appearing in annealed Si rich SiC films.
Nanoscale, . 9(20): 6703-6710 DOI Download fulltext
(2017).
-
Spectroscopic electron tomography analysis of 3D interfacial nanostructures appearing in annealed Si rich SiC films.
I Microscopy conference
(2017).
-
Synthesis of amorphous magnesium carbonate nanoparticles for biomedical applications.
I Bioceramics 29 ISCM 2017
(2017).
-
Intra-bone marrow injection of trace elements co-doped calcium phosphate microparticles for the treatment of osteoporotic rat.
Journal of Biomedical Materials Research. Part A, 105(5): 1422-1432 DOI
(2017).
-
Predicting the mechanical properties of vertebral trabecular bone - a review.
I 23rd congress of the European Society of Biomechanics, Seville (Spain)
(2017).
-
A review of the relationships between density and mechanical properties of vertebral trabecular bone.
I Svenska Mekanikdagarna, Uppsala
(2017).
-
Three years of harvest with the vector vortex coronagraph in the thermal infrared.
I Christopher J Evans (red.) Ground-Based and Airborne Instrumentation for Astronomy VI, . 1-14 DOI
(2016).
-
Workpiece steels protecting cutting tools from wear: A study of the effects of alloying elements on material transfer and coating damage mechanisms.
Diss. Download fulltext
(2016).
-
Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling.
Tribology - Materials, Surfaces & Interfaces, 10(3): 107-116 DOI
(2016).
-
Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools.
Wear, 368-369: 379-389 DOI
(2016).
-
Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact.
Tribology International, 97: 337-348 DOI
(2016).
-
Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool.
Tribology International, 101: 414-424 DOI
(2016).
-
Compressive strength increase of calcium phosphate bone cements is accompanied by a stiffness increase.
I Annual meeting of European Orthopaedic Research Society (EORS)
(2016).
-
The influence of porosity on the fatigue properties of brushite cement.
I Biomaterials for tissue engineering models
(2016).
-
Long-term degradation of brushite cements in three different liquids.
I TERMIS-EU meeting, Uppsala
(2016).
-
Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM)(R).
Additive Manufacturing, . 12: 45-50 DOI
(2016).
-
TEM analysis of multilayered nanostructures formed in the rapid thermal annealed silicon rich silicon oxide film.
I European Microscopy Congress 2016, 965-966 DOI
(2016).
-
Nanocrystalline diamond sensor targeted for selective CRP detection: An ATR-FTIR spectroscopy study.
Analytical and Bioanalytical Chemistry, 408(14): 3675-3680 DOI
(2016).
-
Electrical Characterizationon Commercially Available Chemical Vapor Deposition (CVD) Graphene.
Student thesis, 2016 Download fulltext -
Tool wear in turning of titanium alloy Ti–6Al–4V: Challenges and potential solutions for crater wear, diffusion and chip formation.
Student thesis, 2016 Download fulltext -
Multi-scale study of initial tool wear on textured alumina coating, and the effect of inclusions in low-alloyed steel.
Tribology International, 100: 204-212 DOI
(2016).
-
Adhesion of CVD coatings on new cemeted carbides.
Student thesis, 2016 Download fulltext -
Bio-Nano Interactions: Synthesis, Functionalization and Characterization of Biomaterial Interfaces.
Diss. Download fulltext
(2016).
-
Strategy towards independent electrical stimulation from cochlear implants: Guided auditory neuron growth on topographically modified nanocrystalline diamond.
Acta Biomaterialia, 31: 211-220 DOI
(2016).
-
Biomineralization on Single Crystalline Rutile: The Modulated Growth of Hydroxyapatite by Fibronectin in a Simulated Body Fluid.
RSC Advances, 6: 35507-35516 DOI
(2016).
-
Utilization of Translucent Hydroxyapatite Nano-Ceramics as a Bio-Window Material.
Nano Advances, 1: 45-49
(2016).
-
End-to-end simulations of the E-ELT/METIS coronagraphs.
I Marchetti, E; Close, LM; Veran, JP (red.) Adaptive Optics Systems V, . 1-10 DOI
(2016).
-
Commissioning and first light results of an L’-band vortex coronagraph with the Keck II adaptive optics NIRC2 science instrument.
I Marchetti, E; Close, LM; Veran, JP (red.) Adaptive Optics Systems V . DOI
(2016).
-
Evaluation of dry fly-ash particles causing difficult deposits for acoustic soot blowing of boilers.
Student thesis, 2016 Download fulltext -
Glass Ionomer Cements with Improved Bioactive and Antibacterial Properties.
Diss. Download fulltext
(2016).
-
Enhanced bioactivity of glass ionomer cement by incorporating calcium silicates.
Biomatter, 6(1): e1123842-1-e1123842-13
(2016).
-
Enhanced bioactivity of glass ionomer cement by incorporating calcium silicates.
Biomatter, 6: e1123842-
(2016).
-
Synthesis and characterization of monetite with thin nacre-like structure.
I MRS Spring Meeting & Exhibit
(2016).
-
Synthesis of calcium phosphate crystals with thin nacreous structure.
CrystEngComm, 18(6): 1064-1069 DOI
(2016).
-
Synthesis of Ag doped calcium phosphate particles and their antibacterial effect as additives in dental glass ionomer cements.
Journal of materials science. Materials in medicine, 27(11) DOI
(2016).
-
In vitro cytotoxicity of dental cements on odontoblast cells.
I European Chapter Meeting of the Tissue Engineering and Regenerative Medicine International Society 2016
(2016).
-
Cytotoxicity of modified glass ionomer cement on odontoblast cells.
Journal of materials science. Materials in medicine, 27(7) DOI
(2016).
-
Synthesis and characterization of monetite with thin nacreous structure.
I 2016 MRS Spring Meeting & Exhibit
(2016).
-
Quasi-static compressive strength and compressive fatigue limit of dental cements.
I 9th meeting of the Scandinavian Society for Biomaterials
(2016).
-
Compressive fatigue limit of four types of dental restorative materials.
Journal of The Mechanical Behavior of Biomedical Materials, 61: 283-289 DOI
(2016).
-
Wear resistance of silicon nitride coatings in a hard-on-hard contact.
I 3rd International Conference on BioTribology (ICoBT 2016), 11-14 September 2016 | Imperial College London, London, UK
(2016).
-
Surface defect passivation by a thin metallic barrier for Cu(InxGa1-x)Se2 co-evaporation on Cr-steel substrates.
Thin Solid Films, . 619: 220-226 DOI
(2016).
-
Evaluation of dry friction solutions for industrial applications.
I 17th Nordic Symposium on Tribology, NordTrib 2016
(2016).
-
Lubrication of the cutting tools in a stainless finishing line.
Student thesis, 2016 Download fulltext -
Guided bone regeneration using resorbable membrane and different bone substitutes: Early histological and molecular events.
Acta Biomaterialia, 29: 409-423 DOI
(2016).
-
Surface texturing to promote formation of protective tribofilms on combustion engine valves.
I The 17th Nordic Symposium on Tribology - Nordtrib 2016, Hämeenlinna, Finland, June 14-17, 2016
(2016).
-
Single-Walled Carbon Nanotubes Inhibit the Cytochrome P450 Enzyme, CYP3A4.
Scientific Reports, 6 DOI
(2016).
-
Catheter Related Problems in Pediatric Oncology Treatment: A Technical Investigation Performed at Uppsala Akademsika Sjukhus.
Student thesis, 2016 Download fulltext -
Diamond grating waveplates.
Optical Materials Express, 6(6): 2024-2030 DOI
(2016).
-
Spark plasma sintering consolidated transparent ZrO2- SiO2 glass ceramic containing nano-sized ZrO2 spheres.
I ICC6 International Congress on Ceramics
(2016).
-
Transparent single crystalline ZrO2-SiO2 glass nanoceramic sintered by SPS.
Journal of the European Ceramic Society, 36(14): 3487-3494 DOI
(2016).
-
Novel multiphasic calcium phosphate cements with enhanced degradative properties.
I 10th World Biomaterial Conference, Montreal, Canada
(2016).
-
Characterization of multiphasic calcium phosphate cements with improved degradation rate.
I Tissue Engineering and Regenerative Medicine International Society (TERMIS), Uppsala, June 28th- July 1st, 2016, 202-
(2016).
-
Micro-computed tomography: a tool to study the fracture behaviour of calcium phosphate cements.
I 10th World Biomaterial Conference (WBC 2016), Montreal, Canada, May 17th-22th, 2016
(2016).
-
Allergen-loaded strontium-doped hydroxyapatite spheres improve allergen-specific immunotherapy in mice.
Journal of Investigative Dermatology, 136(9): S225-S225
(2016).
-
Novel microparticles create a slow releasing depot for long-term immunostimulation in allergen-specific immunotherapy.
Experimental dermatology, 25(3): E20-E21
(2016).
-
Cu2ZnSnSe4 solar cells with 10.6% efficiency through innovative absorber engineering with Ge superficial nanolayer.
Progress in Photovoltaics, 24(10): 1359-1367 DOI
(2016).
-
Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires.
Wear, 348: 138-147 DOI
(2016).
-
Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation.
Tribology International, 101: 340-347 DOI
(2016).
-
Tribological testing of top hammer drill buttons.
Student thesis, 2016 Download fulltext -
Initial wear of cemented carbides in sliding contact with different rock types.
I 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland
(2016).
-
Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching.
Nordic Pulp & Paper Research Journal, 31(3): 401-406
(2016).
-
Micrometre compressions to facilitate controlled wear in groundwood pulping.
I 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June
(2016).
-
Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements.
Materials science & engineering. C, biomimetic materials, sensors and systems, 62: 274-282 DOI
(2016).
-
Indirect Solid Freeform Fabrication of an Initiator-Free Photocrosslinkable Hydrogel Precursor for the Creation of Porous Scaffolds.
Macromolecular Bioscience, 16(12): 1883-1894 DOI
(2016).
-
Modification of titanium surfaces to enhance bacteriostatic properties.
I 10th World Biomaterials Congress, Montréal, Canada, 17 May - 22 May, 2016 DOI
(2016).
-
Titanium surface modification leading to increased antibacterial ability, bioactivity and biocompatibility.
I BIOMATERIALS for Tissue engineering Models - Reykjavík, Iceland
(2016).
-
Deformation field estimation in compressed human trabecular bone using synchrotron X-ray tomography.
I 22nd Congress of the European Society of Biomechanics (ESB), Lyon, France
(2016).
-
Microscopic strain fields at crack tips in porous materials analyzed by a gradient-enhanced elasticity theory.
Engineering Fracture Mechanics, 168: 160-173 DOI
(2016).
-
Deformations in trabecular bone during pull-out of screw implants.
I European Society of Biomechanics (ESB) 2016, Lyon, France
(2016).
-
A combined computational and experimental X-ray CT multiscale study of stable, slowly growing cracks in wood-fibre based composite materials.
I ECCOMAS Congress 2016 (VII European Congress on Computational Methods in Applied Sciences and Engineering
(2016).
-
Method for the Characterisationof Grating Based Holographic Paper.
Student thesis, 2016 Download fulltext -
Seeing the Light through Diamonds: How to find Extrasolar Planets.
I 2016 CELSIUS - LINNÉ SYMPOSIUM, Winter Light; A Multi-Disciplinary Symposium, February 19, 2016, Uppsala, Sweden
(2016).
-
A test method for mapping the contact force limit of polymer materials in sliding contact.
I 2nd International Conference on Polymer Tribology, PolyTrib2016
(2016).
-
Ceramic cement as a potential stand-alone treatment for bone fractures: an in vitro study of ceramic-bone composites.
Journal of The Mechanical Behavior of Biomedical Materials, 61: 519-529 DOI
(2016).
-
Infrared spectroscopy combined with imaging: A new developing analytical tool in health and plant science.
Applied spectroscopy reviews (Softcover ed.), 51(6): 466-483 DOI
(2016).
-
Multifunctional Antioxidants: Regenerable Radical-Trapping and Hydroperoxide-Decomposing Ebselenols.
Angewandte Chemie International Edition, 55(11): 3729-3733 DOI
(2016).
-
Boric acid as a lubricating fuel additive: Lab experiments to understand fuel savings in field test.
I Visualize your science 8th mini conference 2nd of December Ångström Lab Uppsala .
(2016).
-
Boric acid as a lubricating fuel additive: Adaption of a labtest technique to mimic piston/cylinder conditions.
I NORDTRIB 2016, June 14-17, 2016, Aulanko, Hämeenlinna, Finland
(2016).
-
Dual-Topography Electric Discharge Machining of Titanium to Improve Biocompatibility.
Surface and Coatings Technology, 296: 149-156 DOI
(2016).
-
Quantitative evaluation of bone regeneration in a craniofacial implant using computed tomography images.
I TERMIS-EU 2016 Conference
(2016).
-
Site-selective local fluorination of graphene induced by focused ion beam irradiation.
Scientific Reports, 6 DOI
(2016).
-
A Multiplex Protein Panel Applied to Cerebrospinal Fluid Reveals Three New Biomarker Candidates in ALS but None in Neuropathic Pain Patients.
PLOS ONE, 11(2) DOI
(2016).
-
Cross section microscopy studies of wear tested polymer composites.
I 17th Nordic Symposium on Tribology (NordTrib), 2016
(2016).
-
Cross sections studies of polymer composites.
I 2nd International conference on Polymer Tribology (PolyTrib), 2016
(2016).
-
Mid-infrared thin-film diamond waveguides combined with tunable quantum cascade lasers for analyzing the secondary structure of proteins.
Physica Status Solidi (a) applications and materials science, 213(8): 2117-2123 DOI
(2016).
-
Progress in Electrolyte-Free Fuel Cells.
FRONTIERS IN ENERGY RESEARCH, . 4 DOI Download fulltext
(2016).
-
Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements.
Journal of The Mechanical Behavior of Biomedical Materials, 60: 617-627 DOI
(2016).
-
Waveguides in polycrystalline diamond for mid-IR sensing.
Optical Materials Express, 6(4): 1286-1295 DOI
(2016).
-
All-Fiber Nanosecond Gating for Time-Resolved Spectral Analysis.
IEEE Photonics Technology Letters, 28(8): 829-832 DOI
(2016).
-
Combinatorial magnetron sputtering of AgFeO2 thin films with the delafossite structure.
Materials & design, 91: 132-142 DOI
(2016).
-
Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties.
ACS Applied Materials and Interfaces, 8(44): 30635-30643 DOI
(2016).
-
Massive Ta diffusion observed in Cu thin films but not in Ag counterparts.
Journal of Vacuum Science & Technology B, 34(6) DOI
(2016).
-
Evaluation of Biocompatibility and Release of Reactive Oxygen Species of Aluminum Oxide-Coated Materials.
ACS Omega, 1(4): 706-713 DOI
(2016).
-
Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement.
Materials science & engineering. C, biomimetic materials, sensors and systems, 58: 88-96 DOI
(2016).
-
Simvastatin-doped pre-mixed calcium phosphate cement inhibits osteoclast differentiation and resorption.
Journal of materials science. Materials in medicine, 27(5) DOI
(2016).
-
Simvastatin and zinc synergistically enhance osteoblasts activityand decrease the acute response of inflammatory cells.
Journal of materials science. Materials in medicine, 27(2) DOI
(2016).
-
Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models".
Tribology letters, 64(17) DOI
(2016).
-
Metal-free photochemical silylations and transfer hydrogenations of benzenoid hydrocarbons and graphene.
Nature Communications DOI
(2016).
-
The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement.
Biomatter, 6(1) DOI
(2016).
-
Dissolution behaviour of silicon nitride coatings for joint replacements.
Materials science & engineering. C, biomimetic materials, sensors and systems, 62: 497-505 DOI
(2016).
-
Morphology and dissolution rate of wear debris from silicon nitride coatings.
ACS Biomaterials Science & Engineering, 2(6): 998-1004 DOI
(2016).
-
Deep cryogenic treatment of tool steels.
Journal of Materials Processing Technology, 229: 398-406 DOI
(2016).
-
Development of localized electrochemical deposition.
Student thesis, 2016 Download fulltext -
Pyrophosphate Stimulates Differentiation, Matrix Gene Expression and Alkaline Phosphatase Activity in Osteoblasts.
PLOS ONE, 11(10) DOI
(2016).
-
In vivo and in vitro evaluation of hydroxyapatite nanoparticle morphology on the acute inflammatory response.
Biomaterials, 90: 1-11 DOI
(2016).
-
Reduced oxidative stress in primary human cells by antioxidant released from nanoporous alumina.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 104(3): 568-575 DOI
(2016).
-
Submicron Calcium Phosphate Spheres for Biomedical Applications: Synthesis and Use.
Diss. Download fulltext
(2016).
-
The effect of concentration of HA nanoparticles on occlusion of dental tubules for treating dentinal sensitivity.
I 2nd International Symposium on Nanoparticles/Nanomaterials and Applications
(2016).
-
Direct conversion of eggshell to hydroxyapatite ceramic by a sintering method.
Ceramics International, 42(6): 7824-7829 DOI
(2016).
-
The effect of two fatty acids on the antibacterial properties of calcium phosphate cements.
I Tissue Engineering and Regenerative Medicine Society, 350-
(2016).
-
Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules.
Tribology International, 96: 141-148 DOI
(2016).
-
A Simple Transmission Electron Microscopy Method for Fast Thickness Characterization of Suspended Graphene and Graphite Flakes.
Microscopy and Microanalysis, 22(1): 250-256 DOI
(2016).
-
Influence of tool surface topography on the material transfer tendency and tool wear in the turning of 316L stainless steel.
Wear, 368-369: 239-252 DOI
(2016).
-
Programming a TEM for magnetic measurements: DMscript code for acquiring EMCD data in a single scan with a q-E STEM setup.
Student thesis, 2016 Download fulltext -
“Smart” drug loaded nanoparticle delivery from a self-healing hydrogel enabled by dynamic magnesium–biopolymer chemistry.
Chemical Communications, 52(74): 11151-11154 DOI
(2016).
-
Validation and development of an electroplating process to deposit a black chromium coating from a trivalent chromium electrolyte.
Student thesis, 2016 Download fulltext -
Combinatorial sputtering of Si-Fe-C-N coatings for joint implants.
I 3rd International Conference on BioTribology (ICoBT 2016)
(2016).
-
Bone Engineering Potential of Cow And Human Derived Decellularized Bone Scaffolds.
Tissue Engineering. Part A, 22: S16-S17
(2016).
-
Fabrication of rnacroporous cement scaffolds using PEG particles: In vitro evaluation with induced pluripotent stem cell-derived mesenchymal progenitors.
Materials science & engineering. C, biomimetic materials, sensors and systems, 69: 640-652 DOI
(2016).
-
Matériaux composites d'implants chirurgicaux cristallins et kits et procédés de fabrication correspondants.
Pat. fr EP 2249889 B1 (2016-05-31)
(2016).
-
Crystalline surgical implant composite materials and kits and methods of manufacture.
Pat. de EP 2249889 B1 (2016-05-31)
(2016).
-
Verbundmaterialien und kits für ein kristallines chirurgisches implantat sowie verfahren zu ihrer herstellung.
Pat. de EP 2249889 B1 (2016-05-31)
(2016).
-
Crystalline surgical implant composite materials and kits and methods of manufacture.
Pat. gb EP 2249889 B1 (2016-05-31)
(2016).
-
Quantitative evaluation of bone regeneration in a craniofacial implant using computed tomography images.
I European Cells and Materials Vol. 31. Suppl. 1
(2016).
-
Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films.
I Stress Evolution in Thin Films and Coatings from Fundamental Understanding to Control Joint ICMCTF-SVC Workshop October 2-5, 2016, Chicago (IL), USA Embassy Suites Hotel, O’Hare-Rosemont, IL .
(2016).
-
Detection of magnetic circular dichroism with subnanometer convergent electron beams.
Physical Review B, 94(13) DOI
(2016).
-
Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts.
I The 17th Nordic Symposium on Tribology - NORDTRIB 2016
(2016).
-
Phase transformations in iron-based alternative binders for hardmetals.
I World PM Congress and Exhibition
(2016).
-
Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications.
ACS Biomaterials Science & Engineering, 2(11): 2072-2079 DOI
(2016).
-
In vitro antibacterial properties and UV induced response from Staphylococcus epidermidis on Ag/Ti oxide thin films.
Journal of materials science. Materials in medicine, 27(3) DOI
(2016).
-
Brushite foamsthe effect of Tween (R) 80 and Pluronic (R) F-127 on foam porosity and mechanical properties.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 104(1): 67-77 DOI
(2016).
-
Bioceramic microneedles in allergen-specific immunotherapy.
I 11th World Immune Regulation Meeting
(2016).
-
Shrinking of silicon nanocrystals embedded in an amorphous silicon oxide matrix during rapid thermal annealing in a forming gas atmosphere.
Nanotechnology, 27(36) DOI
(2016).
-
Controlling the profile of high aspect ratio gratings in diamond.
Diamond and related materials, 63: 60-68 DOI
(2016).
-
Optimizing the subwavelength grating of L-band annular groove phase masks for high coronagraphic performance.
Astronomy and Astrophysics, 595(A127): 1-8 DOI
(2016).
-
Fabrication process for the annular phase groove mask (AGPM).
I 1st international vortex workshop, California Institute of Technology, Pasadena, USA (August 15-17, 2016)
(2016).
-
Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals.
Annals of Biomedical Engineering, . 44(5): 1685-1697 DOI
(2016).
-
Photovoltaic properties of LixCo3-xO4/TiO2 heterojunction solar cells with high open-circuit voltage.
Solar Energy Materials and Solar Cells, 157: 126-133 DOI
(2016).
-
CoFeZrAl-oxide based composite for advanced solid oxide fuel cells.
Electrochemistry communications, 73: 15-19 DOI
(2016).
-
Preparation and characterization of Sm and Ca co-doped ceria-La0.6Sr0.4Co0.2Fe0.8O3-delta semiconductor-ionic composites for electrolyte-layer-free fuel cells.
Journal of Materials Chemistry A, 4(40): 15426-15436 DOI
(2016).
-
Design, fabrication and characterization of a double layer solid oxide fuel cell (DLFC).
Journal of Power Sources, 332: 8-15 DOI
(2016).
-
Investigation of material transfer in sliding friction-topography or surface chemistry?.
Tribology International, 100: 213-223 DOI
(2016).
-
Nitro carburized steels for high stress tribological components – influence on seizure limits from steel grade and surface treatment parameters.
I Nordtrib
(2016).
-
Natural Mineral-Based Solid Oxide Fuel Cell with Heterogeneous Nanocomposite Derived from Hematite and Rare-Earth Minerals.
ACS Applied Materials and Interfaces, 8(32): 20748-20755 DOI
(2016).
-
Industrial-grade rare-earth and perovskite oxide for high-performance electrolyte layer-free fuel cell.
Journal of Power Sources, 307: 270-279 DOI
(2016).
-
Method for manufacturing of spherical calcium phosphate particles.
Pat. 1605112-1
(2016).
-
A transdermal drug administration device.
Pat. WO2016142705A1
(2016).
-
A transdermal drug administration device.
Pat. CN107405300A
(2016).
-
Design of Bioactive Materials for Bone Repair and Regeneration.
(2016).
-
Biological Effect of Ions in CalciumPhosphates on Bone Regeneration.
I Design of Bioactive Materials for Bone Repair and Regeneration .
(2016).
-
Calcium phosphate hollow spheres: carriers and repair.
I 10th World Biomaterials Congress (WBC)
(2016).
-
Ion substituted calcium phosphate particles.
Pat. JP5960051B2 (2016-08-02)
(2016).
-
Ultra high strength and translucent naocrystalline glass ceramic.
Pat. 1600326-1
(2016).
-
Bioactive spheres: the way of treating dentin hypersensitivity.
ACS Biomaterials Science & Engineering, 2(5): 734-740 DOI
(2016).
-
Electron tomography analysis of 3D order and interfacial structure in nano-precipitates.
Diss. Download fulltext
(2016).
-
The fuel cells studies from ionic electrolyte Ce0.8Sm0.05Ca0.15O2-delta to the mixture layers with semiconductor Ni0.8Co0.15Al0.05LiO2-delta.
International journal of hydrogen energy, 41(41): 18761-18768 DOI
(2016).
-
Mixed ionic-electronic conductor membrane based fuel cells by incorporating semiconductor Ni0.8Co0.15Al0.05LiO2-delta into the Ce0.8Sm0.2O2-delta-Na2CO3 electrolyte.
International journal of hydrogen energy, 41(34): 15346-15353 DOI
(2016).
-
On the self-healing of silver contacts.
I ICEC2016, 265-270
(2016).
-
Surface Characterization and Field Emission Measurements of Copper Samples inside a Scanning Electron Microscope.
I the 7th International Particle Accelerator Conference IPAC16 in Busan, South Korea, May 2016, 2083-2085
(2016).
-
Wear on Alumina Coated Tools and the Influence of Inclusions when Turning Low-Alloy Steels: Master Thesis - Chemical Engineering.
Student thesis, 2016 Download fulltext -
An update on the VORTEX project.
I Techniques and Instrumentation for Detection of Exoplanets VII DOI
(2015).
-
Local stiffness measurements in apatite and brushite cements.
I 21st Congress of the European Society of Biomechanics Congress (ESB), Prague
(2015).
-
Evaluation of a porosity measurement method for wet calcium phosphate cements.
Journal of biomaterials applications, . 30(5): 526-536 DOI
(2015).
-
Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution.
BioMed Research International . DOI
(2015).
-
Improving the Flexural Strength Test of Brushite Cement.
Key Engineering Materials, 631: 67-72 DOI
(2015).
-
Graphene and graphene oxide as new lubricants in industrial applications.
Student thesis, 2015 Download fulltext -
The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools.
Wear, 334: 13-22 DOI
(2015).
-
Tribological behaviour of nano-composite UHMWPE on ski surfaces and the role of hydrophobicity.
Student thesis, 2015 Download fulltext -
Lactoperoxidase-mediated degradation of single-walled carbon nanotubes in the presence of pulmonary surfactant.
Carbon, 91: 506-517 DOI
(2015).
-
Thin films composed of gold nanoparticles dispersed in a dielectric matrix: The influence of the host matrix on the optical and mechanical responses.
Thin Solid Films, 596: 8-17 DOI
(2015).
-
Ceramic Materials for Administration of Potent Drugs.
Diss. Download fulltext
(2015).
-
Development and evaluation of a tampering resistant transdermal fentanyl patch.
International Journal of Pharmaceutics, 488(1-2): 102-107 DOI
(2015).
-
Bioceramic microneedles with flexible and self-swelling substrate.
European journal of pharmaceutics and biopharmaceutics, 94: 404-410 DOI
(2015).
-
Fabrication of translucent nanoceramics via a simple filtration method.
RSC Advances, 5(121): 99848-99855 DOI
(2015).
-
Ordered auditory neuron growth on micro-structured nanocrystalline diamond surface.
I Proceedings of the society of photo-optical instrumentation engineers (SPIE) 9557, Nanobiosystems: Processing, Characterization, and Applications VIII, August 9-13, 2015, San Diego, CA, USA
(2015).
-
Changes in secondary structure of α-synuclein during oligomerization induced by reactive aldehydes..
Biochemical and Biophysical Research Communications - BBRC, 464(1): 336-341 DOI
(2015).
-
Performance evaluation of mid-IR vortex coronagraphs with centrally obscured segmented pupils.
I AO4ELT4 International Conference, 25-30 October, Lake Arrowhead, California, USA
(2015).
-
Design and performance simulations of mid-IR AGPMs for ELT/METIS applications.
I SPIE Optics + Photonics: Techniques and Instrumentation for Detection of Exoplanets VII, AUG 13-15, 2015, San Diego, USA DOI
(2015).
-
In vitro and in vivo response to low-modulus PMMA-based bone cement.
BioMed Research International DOI
(2015).
-
Handling and setting properties of a bioactive glass ionomer cement.
I The Symposium and Annual Meeting of the International Association for dental research (IADR)/ American Association for dental research (AADR)
(2015).
-
Highly repeatable synthesis of nHA with high aspect ratio.
Materials letters (General ed.), 159: 163-167 DOI
(2015).
-
A family of subwavelength grating vortexcoronagraphs (SGVCs) with higher topological charge.
I Techniques and Instrumentation for Detection of Exoplanets VII DOI
(2015).
-
Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines.
Wear, 330-331: 193-198 DOI
(2015).
-
An evaluation of methods to determine the porosity of calcium phosphate cements.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 103(1): 62-71 DOI
(2015).
-
Milling in hardened steel - a study of tool wear in conventional- and dynamic milling.
Student thesis, 2015 Download fulltext -
Influence of alkali metal additives on phase transition of translucent ZrO2/SiO2 glass ceramics prepared by a sol-gel method.
European Cells and Materials, 29
(2015).
-
Influence of alkali metal additives on phase transition of translucent ZrO2/SiO2 glass ceramics prepared by a sol-gel method.
European Cells and Materials, 29(S1): 10-
(2015).
-
Influences of alkali metals additives on phase transition of translucent ZrO2/SiO2 glass ceramic prepared by sol-gel method.
I 8th meeting of the Scandinavian Society for Biomaterials
(2015).
-
Micro-CT imaging as a tool to study the fracture behaviour of bone cements.
I 8th Annual meeting of the Scandinavian Society for Biomaterials, May 6-8 2015, Sigulda, Latvia, S-11-
(2015).
-
Large Efficiency Improvement in Cu2ZnSnSe4 Solar Cells by Introducing a Superficial Ge Nanolayer.
Advanced Energy Materials, 5(21) DOI
(2015).
-
Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application.
Surface & Coatings Technology, 276: 210-218 DOI
(2015).
-
A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings.
Tribology Transactions, 58(1): 113-118 DOI
(2015).
-
Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient?.
ACS Biomaterials Science & Engineering, 1(8): 617-620 DOI
(2015).
-
Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test.
I International Tribology Congress, September 16-20, Tokyo, Japan
(2015).
-
Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition.
Wear, 342: 210-221 DOI
(2015).
-
Soft rock scratches hard cemented carbide.
I Wear of Materials, April 12-16, Toronto, Canada
(2015).
-
A labscale test equipment ot study the tool surface influence in pressure groundwood pulping.
I 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16
(2015).
-
Designed tools for controlling the defibration mechanisms in the pressure groundwood process.
I International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20
(2015).
-
Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study.
Journal of Biomechanics, 48(12): 3258-3266 DOI
(2015).
-
The vortex coronagraph:from laboratory characterizationto on-sky operation.
I In the spirit of Bernard Lyot 2015, Montréal 22-26 June
(2015).
-
Material transfer – an underrated phenomenon in friction.
I Baltmattrib
(2015).
-
Friction in curling –Fundamentals and applications of friction on ice illustrated by the Olympic winter sport: Keynote Talk.
I Wear of Materials
(2015).
-
Nano-fabrication of molecular electronic junctions by targeted modification of metal-molecule bonds.
Scientific Reports, 5 DOI
(2015).
-
FIB lithography - nanostructuring using FIB,.
I Myfab and Norfab User Meeting 2015, Lund Nano Lab, Lund, 21-22 April
(2015).
-
Effects on organic degradation in the TiO2/H2O2/UV-Vis system.
European Cells and Materials, 29: 20-
(2015).
-
Effects on organic degradation in the TiO2/H2O2/UV-Vis system.
I 8th Annual meeting of the Scandinavian Society for Biomaterials Proceeding
(2015).
-
Mechanical testing in uCT and synchrotron scanners for an increased understanding of the role of bone microstructure on fracture processes and in fracture treatments.
I Medicinteknikdagarna 2015
(2015).
-
Investigation of tribological mechanisms of a boron additive in lubricants and fuel enhancer.
Student thesis, 2015 Download fulltext -
Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data.
Calphad, 50: 59-67 DOI
(2015).
-
Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015).
International journal of refractory metals & hard materials, 49: 400-405 DOI
(2015).
-
Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system.
International journal of refractory metals & hard materials, 48: 257-262 DOI
(2015).
-
Residual stress in CVD coatings: Evaluation of XRD and TEM methods for micro and macrostress determination.
Student thesis, 2015 Download fulltext -
Optimization of Electron Beam Melting for Production of Small Components in Biocompatible Titanium Grades.
Diss. Download fulltext
(2015).
-
Surface oxidation behavior of Ti–6Al–4V manufactured by Electron Beam Melting (EBM®).
Journal of Manufacturing Processes, . 17(1): 120-126 DOI
(2015).
-
Research at Ångström Laboratory, Uppsala University and micro- and nanostructuring of semiconductor materials.
I The Second Jiangsu-Europe International Conference on New Energy (JSSUN2015) and the twelfth Yangtze River Delta Energy Forum, November 5-7, 2015, Nanjing, China
(2015).
-
Diamond Photonics; Diamond Optics for Direct Imaging of Extrasolar Planets.
I Optics & Photonics in Sweden, October 28-29, 2015, Stockholm, Sweden
(2015).
-
Influence Of Locally Delivered Zoledronate On Peri-Implant Bone Resorption And Formation.
Osteoporosis International, 26: S155-S156
(2015).
-
Wetting and film formation of wheat gluten dispersions applied to wood substrates as particle board adhesives.
European Polymer Journal, 67: 476-482 DOI
(2015).
-
The effect of water on the mechanical properties of soluble and insoluble ceramic cements.
Journal of The Mechanical Behavior of Biomedical Materials, . 51: 50-60 DOI
(2015).
-
Magnetocrystalline anisotropy of hexagonal Co by relative intensities of electron magnetic circular dichroic signals.
I EAMC2, Japan
(2015).
-
Gradient formation in cemented carbides with 85Ni:15Fe-binder phase.
Student thesis, 2015 Download fulltext -
A Cryo-FIB Lift-Out Procedure for Cryo-TEM Sample Preparation at Soft-HardMatter Interfaces.
Microscopy and Microanalysis, 21: 2315-2316 DOI
(2015).
-
Local changes in electronic and magnetic structure – building a quantitative technique in the TEM for measuring dichroism.
I Symposium on EELS to the honour of Peter Schattschneider
(2015).
-
A 10-nm sized few molecule portable platform to assess molecular electronics properties.
I Non organic polymers, Uppsala
(2015).
-
Nanoscale structural and electronic modifications of graphene.
I Functional Materials for Today and Tomorrow, Kolkata, India
(2015).
-
Fabrication of reproducible sub-5 nm nanogaps by a focused ion beam and observation of Fowler-Nordheim tunneling.
Applied Physics Letters, 107(10) DOI
(2015).
-
Fabrication of reproducible sub-5 nm nanogaps by a focused ion beam and application in electrical characterization of single molecules.
I 2nd European Conference on Smart Inorganic Polymers
(2015).
-
The use of bone cement to minimize interbody device subsidence.
I European Association of Neurosurgical Societies (EANS) 2015, Madrid, Spain
(2015).
-
Friction and wear of PA66-PPA composites sliding against anodized aluminium cylinders.
I 20th International Conference on Wear of Materials, Toronto, Canada, 12-16 April, 2015
(2015).
-
Effect of temperature on the performance of some polymer composites.
I International Tribology Conference, Tokyo, 16-20 September, 2015
(2015).
-
Friction and wear studies of some PEEK materials.
Tribologia - Finnish Journal of Tribology, 33(2): 20-28
(2015).
-
The influence of Sr content in calcium phosphate coatings.
Materials science & engineering. C, biomimetic materials, sensors and systems, 53: 322-330 DOI
(2015).
-
Biomimetic calcium phosphate coating of additively manufactured porous CoCr implants.
Applied Surface Science, 353: 40-47 DOI
(2015).
-
Novel selenium- and tellurium-based antioxidants as modulators of inflammatory response.
I Scandinavian Society for Biomaterials Conference
(2015).
-
Novel selenium- and tellurium-based antioxidants as modulators of inflammatory response.
European Cells and Materials, 29(Supp.1): 33-33
(2015).
-
Mid-infrared chem/bio sensors based on thin-film diamond wave-guides combined with quantum cascade lasers.
I Euroanalysis XVIII, 6-10 September 2015, Bordeaux, France
(2015).
-
All-Fiber Polarization-Maintaining Electrooptic Pulse- Picker.
I 2015 CONFERENCE ON LASERS AND ELECTRO-OPTICS (CLEO) DOI
(2015).
-
Diamond waveguides for mid-IR chemical sensing.
I CLEO 2015 – The Conference on Lasers and Electro-Optics/Europe, June 21-25, 2015, Munich, Germany
(2015).
-
Graphene as a lubricant on Ag for electrical contact applications.
Journal of Materials Science, 50(19): 6518-6525 DOI
(2015).
-
Biomaterial characterisation.
Materials Science and Technology, 31(2): 129-130 DOI
(2015).
-
Impoverishment of media by bioactive hydroxyapatite hinders cell proliferation.
European Cells and Materials, 29(Suppl.1): 36-36
(2015).
-
Inflammatory response to nano- and microstructured hydroxyapatite.
PLOS ONE, 10(4) DOI
(2015).
-
Scavenging effect of Trolox released from brushite cements.
Acta Biomaterialia, 11: 459-466 DOI
(2015).
-
Additives Increasing the Bone-Forming Potential around Calcium Phosphate Cements: Statin, Strontium and Silicon.
Diss. Download fulltext
(2015).
-
Resorption of Monetite Calcium Phosphate Cement by Mouse Bone Marrow derived Osteoclasts.
Materials science & engineering. C, biomimetic materials, sensors and systems, 52: 212-218 DOI
(2015).
-
Zebrafish: A possible tool to evaluate bioactive ions.
Acta Biomaterialia, 19: 10-14 DOI
(2015).
-
(Invited) Current progress in nanometric magnetic moment measurements based on electron magnetic circular dichroism.
I Magnetics and Optics Research International Symposium 2015 .
(2015).
-
Persistent diplopia after fractures involving the orbit related to nerve injury.
Journal of Plastic, Reconstructive & Aesthetic Surgery, 68(2): 219-225 DOI
(2015).
-
Complex Surface Chemistry of Kesterites: Cu/Zn Reordering after Low Temperature Postdeposition Annealing and Its Role in High Performance Devices.
Chemistry of Materials, 27(15): 5279-5287 DOI
(2015).
-
Indium tin oxide-silicon nanocrystal nanocomposite grown by aerosol assisted chemical vapour deposition.
Journal of Sol-Gel Science and Technology, 73(3): 666-672 DOI
(2015).
-
Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses.
Tribology - Materials, Surfaces & Interfaces, . 9(4): 165-173 DOI
(2015).
-
Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon.
Wear, 340-341(SI): 9-18 DOI
(2015).
-
Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms.
I 20th International Conference on Wear of Materials
(2015).
-
Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms.
Wear, 330: 42-48 DOI
(2015).
-
Mechanisms behind the promising tribological performance of a boric acid based lubricant additive.
I Proceedings of the 42th Leeds-Lyon Symposium on Tribology
(2015).
-
Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock.
International journal of refractory metals & hard materials, 52: 104-113 DOI
(2015).
-
Cooperative Gold Nanoparticle Stabilization by Acetylenic Phosphaalkenes.
Angewandte Chemie International Edition, 54(36): 10634-10638 DOI
(2015).
-
In vivo response to low-modulus PMMA bone cements in a rodent model.
I Interdisciplinary Research Society for Bone and Joint Injectable Biomaterials (GRIBOI) 2015, Toronto, Canada
(2015).
-
The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements.
Journal of biomaterials applications, 30(3): 279-289 DOI
(2015).
-
Silicon nitride for total hip replacements.
Diss. Download fulltext
(2015).
-
A Mach-Zehnder interferometer based on orbital angular momentum for improved vortex coronagraph efficiency.
I Techniques And Instrumentation For Detection Of Exoplanets Vii DOI
(2015).
-
Impact of fracture toughness on surface properties of PVD coated cold work tool steel.
Surface & Coatings Technology, 277: 144-150 DOI
(2015).
-
Rebamipide Delivered by Brushite Cement Enhances Osteoblast and Macrophage Proliferation.
PLOS ONE, 10(5) DOI
(2015).
-
Influence of hydroxyapatite nanoparticle morphology on inflammatory response.
I 8th meeting of the Scandinavian Society for Biomaterials
(2015).
-
Influence of hydroxyapatite nanoparticle morphology on inflammatory response.
European Cells and Materials, 29
(2015).
-
Influence of hydroxyapatite nanoparticle morphology on inflammatory response.
European Cells and Materials, 29(S1): 43-
(2015).
-
The effect of concentration of HA nanoparticles on occlusion of dental tubules for treating dentinal sensitivity.
I ESB 2015
(2015).
-
Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres.
Journal of Applied Biomaterials & Functional Materials, 13(3): E241-E247 DOI
(2015).
-
Effect of a Bromo Substituent on the Glutathione Peroxidase Activity of a Pyridoxine-like Diselenide.
The Journal of Organic Chemistry, 50(15): 7385-7395 DOI
(2015).
-
Development of Macroporous Ceramic Scaffolds for Bone Engineering Applications using Human Induced Pluripotent Stem Cells.
Tissue Engineering. Part A, 21: S117-S117
(2015).
-
Bone response to a novel Ti–Ta–Nb–Zr alloy.
Acta Biomaterialia, 20: 165-175
(2015).
-
Bone response to a novel Ti-Ta-Nb-Zr alloy.
Acta Biomaterialia, 20: 165-175 DOI
(2015).
-
Pump test analogy.
Student thesis, 2015 Download fulltext -
Biomimetic Hydroxyapatite Coated Titanium Screws Demonstrate Rapid Implant Stabilization and Safe Removal In-Vivo.
Journal of Biomaterials and Nanobiotechnology, 6: 20-35 DOI
(2015).
-
Spatial correlation of structure / composition trends in Cu2ZnSnSe4-based solar cells with sub-nanometer resolution.
I 2015 Materials Research Society Fall Meeting
(2015).
-
(Invited) Linking magnetic properties to nanoscale spectral and spatial features.
I 79. Jahrestagung der DPG und DPG-Frühjahrstagung
(2015).
-
Quantitative analysis of magnetic spin and orbital moments from an oxidized iron (110) surface using electron magnetic circular dichroism.
Scientific Reports, 5 DOI
(2015).
-
CVD Coating Adhesion on Metal Cutting Insertswith Alternative Binders.
I Wear of Materials 2015, Toronto
(2015).
-
Investigation of Cemented Carbides with Alternative Binders after CVD Coating.
I Euro PM 2015, Reims
(2015).
-
Optimizing Transmission Kikuchi Diffraction for Analysing Grain Size and Orientation of Nanocrystalline Coatings.
Student thesis, 2015 Download fulltext -
Composites of Polyvinyl Alcohol and Nanocellulose for Contact Lens Applications.
I Uppsala Biomaterials Conference 2015
(2015).
-
Antibacterial Strategies for Titanium Biomaterials.
Diss. Download fulltext
(2015).
-
Reactive combinatorial synthesis and characterization of a gradient Ag–Ti oxide thin film with antibacterial properties.
Acta Biomaterialia, 11: 503-510 DOI
(2015).
-
Nanocrystal size distribution analysis from transmission electron microscopy images.
Nanoscale, 7(48): 20593-20606 DOI
(2015).
-
High aspect ratio sub-wavelength gratings in diamond.
I 9th International Conference on New Diamond and Nano Carbons 2015, Shizouka, Japan, 24-28 May, 102-102 DOI
(2015).
-
Optimization of Transport Simulation for Infusion Bags: - A Study of Wear on Plastic Packaging.
Student thesis, 2015 Download fulltext -
Synthesis of nanoscale electronic device by molecular place exchange reaction in the nanoparticle nanoelectrode bridge platform.: Synthesis of nanoscale electronic device by molecular place exchange reaction in the nanoparticle-nanoelectrodebridge platform.
I European Conference on Molecular Electronics (ECME) 2015
(2015).
-
Exponentially decaying magnetic coupling in sputtered thin film FeNi/Cu/FeCo trilayers.
Applied Physics Letters, 106(4) DOI
(2015).
-
Cemented carbides based on WC pre-alloyed with Cr or Ta.
International journal of refractory metals & hard materials, 49: 36-41 DOI
(2015).
-
INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?.
I Leeds Lyon symposium on tribology 2015
(2015).
-
A transdermal drug administration device.
Pat. CA2978167A1
(2015).
-
Ion substituted calcium phosphate particles.
Pat. CN102639159B (2015-04-01)
(2015).
-
Analysis of Nanostructure and interface in vacuum annealed Si rich SiC by 4D electron tomography.
I 2nd International Workshop on TEM Spectroscopy in the Materials Sciences Uppsala, Sweden
(2015).
-
Composition And Structure Of Bimodal WC-Co Materials Related To Mechanical Properties And Abrasive Wear.
I M2D2015, 655-664
(2015).
-
Bacteria-material surface interactions: methodological development for the assessment of implant surface induced antibacterial effects..
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 103(1): 179-187 DOI
(2015).
-
Porosity prediction of calcium phosphate cements based on chemical composition.
Journal of materials science. Materials in medicine, 26(7) DOI
(2015).
-
Optimized, high performance vortex coronagraphs for E-ELT instruments.
I Exoplanet Observations with the E-ELT 2014, ESO Garching, 3-6 February
(2014).
-
Reaching the diffraction limit with the vortex coronagraph.
I Exoplanet Observations with the E-ELT 2014, ESO Garching, 3-6 February
(2014).
-
The VORTEX project: first results and perspectives.
I Adaptive Optics Systems IV DOI
(2014).
-
Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications.
BioMed Research International, 2014: 475280- DOI
(2014).
-
A non-drying porosity evaluation method for calcium phosphate cements.
I 26th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, 68-68
(2014).
-
Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty.
Biomechanics and Modeling in Mechanobiology, . 13(6): 1199-1207 DOI
(2014).
-
Compressive Fatigue Properties of Acidic Calcium Phosphate Cement.
I Proceedings of 7th World Congress of Biomechanics
(2014).
-
Real wet density of bone tissue: Does it depend on tissue type and subject?.
I Proceedings of 7th World Congress of Biomechanics, 2014
(2014).
-
Operation characteristics and optical emission distribution of a miniaturized silicon through-substrate split-ring resonator microplasma source.
Journal of microelectromechanical systems, 23(6): 1340-1345 DOI
(2014).
-
Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities.
International journal of refractory metals & hard materials, 43: 205-211 DOI
(2014).
-
Assessing cement injection behaviour in cancellous bone: An in vitro study using flow models.
Journal of biomaterials applications, 29(4): 582-594 DOI
(2014).
-
Geopolymer-based drug formulations for oral delivery of opioids.
lic.-avh.
(2014).
-
Aluminum release from geopolymer-based opioid formulation.
I 2014 AAPS Annual Meeting and Exposition, San Diego, Nov 2 - 6 2014
(2014).
-
Evaluation of the effect of polymer content on drug release and mechanical strength of a geopolymer ER formulation for opioid drugs.
I 26th European Conference on Biomaterials (ESB 2014), August 31 - September 3, 2014, Liverpool, UK
(2014).
-
Evaluation of the resistance of a geopolymer-based drug delivery system to tampering.
International Journal of Pharmaceutics, 465(1-2): 169-174 DOI
(2014).
-
Development and evaluation of self-setting bioceramic microneedles.
I International conference on microneedles, May 19-21, 2014, Baltimore, MD, USA
(2014).
-
Development and evaluations of self-setting bioceramics microneedles.
I The third International Conference on Microneedles
(2014).
-
Self-setting bioceramic microscopic protrusions for transdermal drug delivery.
Journal of materials chemistry. B, 2(36): 5992-5998 DOI
(2014).
-
Photocatalytic inactivation of biofilms on bioactive dental adhesives.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 102(1): 62-67 DOI
(2014).
-
Photocatalysis induces bioactivity of an organic polymer based material.
RSC Advances, 4(101): 57715-57723 DOI
(2014).
-
Low pressure plasma treatment of polylactide fibres for enhanced mechanical performance of fibre-reinforced calcium phosphate cements.
Plasma Processes and Polymers, 11(7): 694-703 DOI
(2014).
-
Mid-IR AGPMs for ELT applications.
I GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY V DOI
(2014).
-
Design and expected performances ofL, M and N band AGPMs for EELT/METIS..
I Exoplanet Observations with the E-ELT 2014, ESO Garching, 3-6 February
(2014).
-
Two Paste-type Glass Ionomer Cement.
I The 7th Annual Meeting of Scandinavian Society for Biomaterials, Aarhus, Denmark
(2014).
-
Glass Ionomer Cement Modified by White Portland Cement.
I 26th Symposium and Annual Meeting of the International Society for Ceramics in Medicine (BIOCERAMICS 26)
(2014).
-
Weld Quality in Aluminium Alloys.
Student thesis, 2014 Download fulltext -
L'-band AGPM vector vortex coronagraph's first light on LBTI/LMIRCam.
I Adaptive Optics Systems IV DOI
(2014).
-
L'-band AGPM vector vortex coronagraph's first light on LBTI/LMIRCAM.
I Search for Life Beyond the Solar System. Exoplanets, Biosignatures & Instruments, March 16-21, 2014, Tucson, AZ, USA
(2014).
-
Development of a subwavelength grating vortex coronagraph of topological charge 4 (SGVC4).
I GROUND-BASED AND AIRBORNE INSTRUMENTATION FOR ASTRONOMY V DOI
(2014).
-
Functionalization of steel substrate: influence of barrier nature on element diffusion from the substrate.
I IMC Prague 2014 .
(2014).
-
Molecular and structural patterns of bone regeneration in surgically created defects containing bone substitutes.
Biomaterials, 35(10): 3229-3242 DOI
(2014).
-
Formation and degradation of protective tribofilms on diesel engine valve surfaces.
I The 16th Nordic Symposium on Tribology - Nordtrib 2014, Aarhus, Denmark, June 10-13, 2014
(2014).
-
Wear mechanism differences of intake valves within heavy duty combustion engines.
I SAE International Powertrain, Fuels & Lubricants Meeting, Birmingham, October 20-23, 2014
(2014).
-
Wear mechanism study of intake valve system in modern heavy duty combustion engines.
I 5th Asian Tribology Conference - Asiatrib 2014, Agra, India, February 17-20, 2014
(2014).
-
The effect of composition on mechanical properties of brushite cements.
Journal of The Mechanical Behavior of Biomedical Materials, . 29: 81-90 DOI
(2014).
-
Development of a bioactive implant for repair and potential healing of cranial defects.
Journal of Neurosurgery, 120(1): 273-277 DOI
(2014).
-
On the sulphuric acid corrosion in large 2-stroke marine diesel engines.
I Tribocorrosion 2014, 9-11 April 2014, University of Strathclyde, Glasgow
(2014).
-
Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations.
Tribology International, 69: 150-155 DOI
(2014).
-
The importance of oil and particle flow for exhaust valve wear - An experimental study.
Tribology International, 69: 176-183 DOI
(2014).
-
Realizing the diamond annular groove phase masks for the mid infrared region - five years of successful process development of diamond plasma etching.
I Conference on Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation, JUN 23-27, 2014, Montreal, CANADA DOI
(2014).
-
Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel.
Journal of Materials Processing Technology, 214(8): 1467-1481 DOI
(2014).
-
Characterization of dental interfaces with electron tomography.
Biointerphases, 9(2): 029001- DOI
(2014).
-
A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring.
I Proceedings of the 27th International Conference on Electrical Contacts, . 237-243
(2014).
-
Thin film growth of Fe-based superconductors: from fundamental properties to functional devices. A comparative review.
Reports on progress in physics (Print), 77(4): 046502- DOI
(2014).
-
Deformation-activated work material transfer to DLC coatings.
I Asiatrib, February 17-20, Agra, India
(2014).
-
Morphology and composition of tribofilms deposited using a tribochemical burnishing technique.
Tribology - Materials, Surfaces & Interfaces, 8(1): 14-20
(2014).
-
Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM.
Wear, 315(1-2): 87-94 DOI
(2014).
-
Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling.
I Nordtrib, June 10-13, Aarhus, Denmark
(2014).
-
Scratch testing for mimicking the early stage of wood defibration.
I Asiatrib, Agra, India, February 17-20
(2014).
-
Initiation of wood defibration, tribology at the fiber level.
I Nordtrib, Aarhus, Denmark, June 10-13
(2014).
-
Friction and wear studies of some PEEK materials.
I 16th Nordic Symposium on Tribology (NORDTRIB)
(2014).
-
Effect of PTFE on the tribological behaviour of PPS with glass fiber.
I 1st International conference on polymer tribology (PolyTrib)
(2014).
-
Iodine-enhanced contrast applicable for microcomputed tomography.
Journal of Tissue Engineering and Regenerative Medicine, 8: 245-246
(2014).
-
The Effect of 45° Grain Boundaries and associated Fe particles on Jc and resistivity in Ba(Fe0.9Co0.1)2As2 Thin Films.
I Advances in Crzogenic Engineering, . 260-267 DOI
(2014).
-
Low-friction Sliding Without Lubrication– Five Working Material Concepts and Tribological Challenges.
I 7th China International Symposium on Tribology
(2014).
-
The delicate balance of tribofilm formation on combustion engine valves.
I 3rd European Friction, Wear and Wear Protection Karlsruhe, Germany, May 2014
(2014).
-
Stability optimisation of molecular electronic devices based on nanoelectrode–nanoparticle bridge platform in air and different storage liquids.
Journal of nanoparticle research, 16(12): 1-11
(2014).
-
Piezoelectricity and photoconductivity in single or few Zinc Oxide nanorods.
I International conference on impact of Nano-science on energy technologies (NanoSET-2014)
(2014).
-
Stability optimisation of molecular electronic devices based on nanoelectrode-nanoparticle bridge platform in air and different storage liquids.
Journal of nanoparticle research, 16(12): 2811- DOI
(2014).
-
Effects of defects on the tensile strength of short-fibre composite materials.
Mechanics of materials (Print), 75: 125-134 DOI
(2014).
-
Thermodynamic analysis of the Co-Cr-C system.
Calphad, 46: 226-236 DOI
(2014).
-
Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2.
Metallurgical and Materials Transactions. A, 45A(11): 4820-4828 DOI
(2014).
-
Digital Image Correlation analysis of local strain fields on Ti6Al4V manufactured by Electron Beam Melting.
Materials Science & Engineering, . 618: 456-461 DOI
(2014).
-
Investigation of the dielectric breakdown strength of polymer nanocomposites.
Student thesis, 2014 Download fulltext -
Diamond Optics for Direct Imaging of Extrasolar Planets.
I The International New Diamond and Nano Carbons Conference – NDNC 2014, (May 25-29, 2014, Chicago, IL, USA
(2014).
-
Does locally delivered Zoledronate influence pen-implant bone formation?: Spatio-temporal monitoring of bone remodeling in vivo.
Biomaterials, 35(37): 9995-10006 DOI
(2014).
-
The compressive modulus and strength of saturated calcium sulphate dihydrate cements: Implications for testing standards.
Journal of The Mechanical Behavior of Biomedical Materials, 34: 187-198 DOI
(2014).
-
Using the cryo-FIB at the interface between materials and life science.
I Cryo FIB workshop, Lausanne
(2014).
-
The Uppsala Network of Electron Microscopy.
I Swedish Bioimaging, workshop in Uppsala
(2014).
-
Structural, electrical and sensing properties of defected graphene.
I Structural, electrical and sensing properties of defected graphene
(2014).
-
Structural, electrical and sensing properties of defected graphene.
I 7th international conference on molecular electronic, Strasbourg, August 25-29, 2014
(2014).
-
Development and use of a cryo-FIB-cryo-TEM technique for site-specific lift-out of TEM samples.
I Scandem proceedings
(2014).
-
Selection of EMCD signal in reciprocal space for quantitative analysis nanomagnetism.
I PICO conference of aberration corrected TEM, Vaals, NL
(2014).
-
Analysis of structural order in Fe1‐xZrx thin amorphous films.
I Int. Microscopy conference, Prague
(2014).
-
Fluctuation electron microscopy on Fe1-xZrx thin amorphous films.
I PICO conference, VAALS, NL
(2014).
-
Evolution of atomic structure of defective graphene under Ga+ ion irradiation.
I Evolution of atomic structure of defective graphene under Ga+ ion irradiation
(2014).
-
Atomic structure of defective graphene under Ga ion irradiation at low and high doses.
I Atomic structure of defective graphene under Ga ion irradiation at low and high doses
(2014).
-
Evolution of atomic structure of defects in graphene under focused ion beam irradiation.
I Evolution of atomic structure of defects in graphene under focused ion beam irradiation
(2014).
-
Evolution of atomic structure of defective graphene under Ga ion irradiation.
I Evolution of atomic structure of defective graphene under Ga ion irradiation .
(2014).
-
Improving graphene based gas sensor components by atomic scale defect engineering.
I Improving graphene based gas sensor components by atomic scale defect engineering
(2014).
-
Dynamics of SiO2 Buried Layer Removal from Si-SiO2-Si and Si-SiO2-SiC Bonded Substrates by Annealing in Ar.
Journal of Electronic Materials, . 43(2): 541-547 DOI
(2014).
-
Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers.
Materials science & engineering. C, biomimetic materials, sensors and systems, 40: 76-84 DOI
(2014).
-
The effect of porosity on the zeta potential of calcium phosphate cements.
BioNanoMaterials, 15(Supp.1): S46-
(2014).
-
Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model.
Journal of The Mechanical Behavior of Biomedical Materials, 32: 245-256 DOI
(2014).
-
Calcium phosphate cements with strontium halides as radiopacifiers.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 102(2): 250-259 DOI
(2014).
-
Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks.
Journal of materials chemistry. B, 2(33): 5378-5386 DOI
(2014).
-
Diamond waveguides for mid-IR sensing.
I Optics & Photonics in Sweden, 11-12 November, 2014, Göteborg, Sweden, 1-1
(2014).
-
New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines.
Cellulose, 21(6): 3941-3950 DOI
(2014).
-
New insights into the mechanisms behind the strengthening of lignocellulosic fibrous networks with polyamines.
Cellulose, 21(6): 3941-3950 DOI
(2014).
-
Effect of Setting Time on Drug Release from a Brushite Cement.
I 26th Symposium and Annual Meeting of the International Society for Ceramics in Medicine (BIOCERAMICS 26), Barcelona, Spain.
(2014).
-
Sustained release of simvastatin from premixed injectable calcium phosphate cement.
Journal of Biomedical Materials Research. Part A, 102(2): 340-347 DOI
(2014).
-
Monetite resorption of mouse bone marrow macrophage derived osteoclasts.
I The 24nd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (Griboi), Nantes, France, 5-7 may, 2014
(2014).
-
Zebrafish embryo: A new tool to study skeletal effects of silicate ions..
I The 26th annual Conference European Society of Biomaterials, Liverpool, UK 31 august-3 september 2014
(2014).
-
Growth of polycrystalline Ag/Ni multilayers at room temperature.
Thin Solid Films, 558: 184-188 DOI
(2014).
-
Hexagonal ion doped Calcium phosphates.
I Bioceramics 26
(2014).
-
A method for tribological evaluation of gradient surfaces.
I Asiatrib 2014, Agra, India
(2014).
-
Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces.
Tribology letters, . 56(3): 563-572 DOI
(2014).
-
Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications.
Surface & Coatings Technology, . 260: 326-334 DOI
(2014).
-
Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon.
I Sivebæk, Ion Marius (red.) Proceedings of 16th Nordic Symposium on Tribology
(2014).
-
On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling.
I International Conference on the Science of Hard Materials, March 10-14, Cancun, Mexico
(2014).
-
Termodynamisk utvärdering av borstål.
Student thesis, 2014 Download fulltext -
Effect of nanoporosity on inflammatory cells.
European Journal of Clinical Investigation, 44(S1): 36-36
(2014).
-
Effects of nanoporous alumina on inflammatory cell response.
Journal of Biomedical Materials Research. Part A, 102(11): 3773-3780 DOI
(2014).
-
Controlling Osteogenic Differentiation through Nanoporous Alumina.
Journal of Biomaterials and Nanobiotechnology, 5(2): 98-104 DOI
(2014).
-
Enhanced bleaching effect by combining hollow calcium phosphate spheres.
I Fourth international conference on multifuctional, hybrid and nanomaterial(hybrid material 2015), that is to be held in Sitges, Spain. 9-13 March 2015.
(2014).
-
Calcium phosphate spheres incorporated into PMMA cement for enhanced antibacterial properties.
I 26th European Conference on Biomaterials (ESB 2014)
(2014).
-
The effect of lubrication on the friction performance in pneumatic clutch actuators.
Wear, 309(1-2): 166-173 DOI
(2014).
-
Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator.
Wear, 319(1-2): 227-233 DOI
(2014).
-
Cryo-electron Microscopy Specimen Preparation By Means Of a Focused Ion Beam.
Journal of Visualized Experiments DOI
(2014).
-
Gold Nanowire Based Electrical DNA Detection Using Rolling Circle Amplification.
ACS Nano, 8(2): 1147-1153 DOI
(2014).
-
Pinning and wicking in regular pillar arrays.
Soft Matter, 10(31): 5739-5748 DOI
(2014).
-
Formation and Function of Low-Friction Tribofilms.
Diss. Download fulltext
(2014).
-
Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings.
Surface & Coatings Technology, . 258: 86-94 DOI
(2014).
-
Mechanisms for compositional variations of coatings sputtered from a WS2 target.
Surface & Coatings Technology, 252: 186-190 DOI
(2014).
-
Growth of polycrystalline Ag/Ni multilayers at room temperature.
Elsevier IFAC Publications / IFAC Proceedings series
(2014).
-
Distinguishing overlapping EMCD signals on oxidized metals in the TEM.
I 18th International Microscopy Congress
(2014).
-
Nanoscale magnetic behavior quantified with EMCD.
I Annual Conference of the Nordic Microscopy Society (SCANDEM)
(2014).
-
Multidomain analysis of porous silica media.
I 18th International Microscopy Congress
(2014).
-
Hydroxyapatite coating affects the Wnt signaling pathway during peri-implant healing in vivo.
Acta Biomaterialia, 10(3): 1451-1462 DOI
(2014).
-
Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications.
Journal of The Mechanical Behavior of Biomedical Materials, 39: 61-72 DOI
(2014).
-
Lubricants: Introduction to properties and performance.
DOI
(2014).
-
Combinatorial approach to composition-structure-property relationships in an antibacterial Ag-Ti thin film.
I 26th Annual Conference of the European Society for Biomaterials (ESB), Liverpool, UK, 31 August – 3 September 2014
(2014).
-
Physical Properties of Acidic Calcium Phosphate Cements.
Diss. Download fulltext
(2014).
-
Development of a Resorbable Calcium Phosphate Cement with Load Bearing Capacity.
Bioceramics Development and Applications, 4(1): 1000074- DOI
(2014).
-
Preparation and in vitro evaluation of strontium-doped calcium silicate/gypsum bioactive bone cement.
Biomedical Materials, 9(4): 045002- DOI
(2014).
-
Diamonds are a Spectroscopist’s Best Friend: Thin Film Diamond Mid-Infrared Waveguides for Advanced Chem/Bio Sensors.
Analytical Chemistry, 86(16): 8136-8141 DOI
(2014).
-
Glass ceramic material and method.
Pat. us US 2014/0205972A1
(2014).
-
Glass ceramic material and method.
Pat. European Patent Office (EPO) EP2945597A1
(2014).
-
Hollow calcium phosphate particles.
Pat. WO2014148997A1
(2014).
-
Three dimensional electron tomography characterization of islet amyloid polypeptide aggregates in drosophila melanogaster.
I Electron tomography
(2014).
-
Three dimensional electron tomography characterization of islet amyloid polypeptide aggregates in drosophila melanogaster.
I 18th International Microscopy Congress, Prague.
(2014).
-
3D electron tomography analysis of silicon nanoparticles in SiC matrices by quantitative determination of EELS plasmon intensities.
I 18th International Microscopy Congress, Prague.
(2014).
-
3D electron tomography analysis of silicon nanoparticles in SiC matrices by quantitative determination of EELS plasmon intensities.
I 18th International Microscopy Congress
(2014).
-
The analysis of nanostructures and interface in vacuum annealed Si rich SiC film by 3D spectros electron tomography: use of spectrum imaging technique on transmission electron microscopy.
I Annual Conference of the Nordic Microscopy Society, SCANDEM 2014, 11-13 June 2014, Linköping, Sweden.
(2014).
-
Facilitating separation of bone from bonelike materials in micro-computed tomography images.
I Bruker microCT 2014 User Meeting, Ostend, Belgium, 172-175
(2014).
-
Compressive fatigue properties of acrylic bone cement for vertebroplasty.
I The 23rd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials in Bone Augmentation Procedures
(2013).
-
Understanding field experience of contact performance from lab fretting tests of model contacts.
I Proc. IEEE 59th HOLM Conference on Electrical Contacts, . 207-214
(2013).
-
On a wear test for rock drill inserts.
Wear, 301(1-2): 109-115 DOI
(2013).
-
On a wear test for rock drill inserts.
I Wear of Materials
(2013).
-
A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition.
Theoretical Chemistry accounts, 133(2): 1433- DOI
(2013).
-
Dielectric characterization of osteosarcoma cells in the 2-50 GHz range for microwave hyperthermia.
I Medicinteknikdagarna, Stockholm, 1-2 oktober
(2013).
-
The effect of curing conditions on compression strength and porosity of metakaolin-based geopolymers.
I Developments in Strategic Materials and Computational Design IV . DOI
(2013).
-
ATR- FTIR spectroscopy study of oxidative modification of the a-synuclein secondary structure.
I Optics & Photonics in Sweden, October 22-23, 2013, Uppsala, Sweden
(2013).
-
Strontium-Doped Calcium Phosphate and Hydroxyapatite Granules Promote Different Inflammatory and Bone Remodelling Responses in Normal and Ovariectomised Rats.
PLOS ONE, 8(12): e84932- DOI
(2013).
-
CIGS on steel substrate: Diffusion of iron through the barrier layer.
I GradSAM Workshop, 2013 Uppsala: GradSAM.
(2013).
-
TEM analyses of diffusion barrier on steel substrate.
I MyFAB Workshop Uppsala: MyFAB.
(2013).
-
Biological Effects of Strontium-Doped Calcium Phosphate and Hydroxyapatite Granules during Bone Healing in Normal and Ovariectomised Rats.
I European Society for Biomaterials (ESB) 2013: 25th European Conference on Biomaterials and 10th Young Scientific Forum
(2013).
-
The influence of curing conditions on mechanical strength and porosity of geopolymers.
I The influence of curing conditions on mechanical strength and porosity of geopolymers
(2013).
-
Optimization of an acidic calcium phosphate cement with enhanced radiopacity.
I The 23rd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures - GRIBOI
(2013).
-
Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement.
Biomatter, 3(4): e27249- DOI
(2013).
-
Influence of water content on hardening and handling of a premixed calcium phosphate cement.
Materials science & engineering. C, biomimetic materials, sensors and systems, 33(1): 527-531 DOI
(2013).
-
Off-pathway alpha-synuclein oligomers seem to alter alpha-synuclein turnover in a cell model but lack seeding capability in vivo.
Amyloid, 20(4): 233-244 DOI
(2013).
-
The influence of surface defects on the mechanical and tribological properties of VN-based arc-evaporated coatings.
Wear, 297(1-2): 1111-1119 DOI
(2013).
-
Combustion Valve Wear: A Tribological Study of Combustion Valve Sealing Interfaces.
Diss. Download fulltext
(2013).
-
Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig.
I Wear of Materials .
(2013).
-
Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig.
Wear, . 302(1-2 SI): 1351-1359 DOI
(2013).
-
Performance of DLC coatings in heated commercial engine oil.
Wear, 304(1-2): 211-222 DOI
(2013).
-
A Template-Free, Ultra-Adsorbing, High Surface Area Carbonate Nanostructure.
PLOS ONE, 8(7): e68486- DOI
(2013).
-
Laser induced surface structuring and ion conversion in the surface oxide of titanium: possible implications for the wetability of laser treated implants..
Journal of materials science. Materials in medicine, 24(1): 11-15 DOI
(2013).
-
Where bone meets implant: the characterization of nano-osseointegration.
Nanoscale, 5(10): 4302-4308 DOI
(2013).
-
Three-dimensional structure of laser-modified Ti6Al4V and bone interface revealed with STEM tomography.
Ultramicroscopy, 127: 48-52 DOI
(2013).
-
Effect of Calcium and Strontium on Mesoporous Titania Coatings for Implant Applications.
Journal of Biomaterials and Nanobiotechnology, 4(2): 107-113 DOI
(2013).
-
Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite.
Wear, . 302(1-2 SI): 1481-1491 DOI
(2013).
-
Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite.
I WOM 2013 : 19th International Conference on Wear of Materials, Portland, USA
(2013).
-
Triboactive Component Coatings: Tribological Testing and Microanalysis of Low-Friction Tribofilms.
Diss. Download fulltext
(2013).
-
A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings.
I World Tribology Congress
(2013).
-
All roads lead to Rome: On the numerous routes to low-friction WS2 tribofilms.
I Wear of Materials
(2013).
-
Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions.
Wear, 303(1-2): 286-296 DOI
(2013).
-
Ultra-low friction of W-S-N solid lubricant coating.
Surface & Coatings Technology, 232: 541-548 DOI
(2013).
-
Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation.
Surface & Coatings Technology, 232: 616-626 DOI
(2013).
-
Lessons from oxypnictide thin films.
International Journal of Modern Physics B, 27(4): 1330001- DOI
(2013).
-
The Positive Effect of Nitrogen Alloying of Tool Steels Used in Sheet Metal Forming.
Diss. Download fulltext
(2013).
-
Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings.
Tribology International, . 58: 55-64 DOI
(2013).
-
Morphology and composition of tribofilms deposited using a tribochemical burnishing technique.
I 3rd International Tribology Symposium of IFToMM, March 19-21, 2013, Luleå, Sweden
(2013).
-
Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM.
Wear, 302(1-2 SI): 1249-1256 DOI
(2013).
-
Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM.
I World Tribology Congress, September 8-13, 2013, Torino, Italy
(2013).
-
Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM.
Tribology letters, 50(3): 431-438 DOI
(2013).
-
Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM.
I Wear of Materials Conference, Portland, Oregon, USA
(2013).
-
Osteogenic potential of Sr-doped calcium phosphate hollow spheres in vitro and in vivo.
Journal of Biomedical Materials Research. Part A, 101(8): 2322-2331 DOI
(2013).
-
In vivo performance of a BP-linked hyaluronan-based hydrogel as carrier of bone morphogenetic protein-2.
I In vivo performance of a BP-linked hyaluronan-based hydrogel as carrier of bone morphogenetic protein-2
(2013).
-
Tribology is just another word for extreme conditions: Invited Keynote.
I International Conference on Sustainable Construction and Design
(2013).
-
New experimental findings on the role of initial material transfer in determining friction and surface damage.
I World Tribology Congress, September 8-13, 2013, Torino, Italy
(2013).
-
Identification of vibrational signatures from short chains of interlinked molecule-nanoparticle junctions obtained by inelastic electron tunnelling spectroscopy.
Nanoscale, 5(11): 4673-4677 DOI
(2013).
-
Swelling of cellulose fibres in composite materials: Constraint effects of the surrounding matrix.
Composites Science And Technology, 74: 52-59 DOI
(2013).
-
Characterization and comparison of materials produced by Electron Beam Melting (EBM) of two different Ti-6Al-4V powder fractions.
Journal of Materials Processing Technology, 213(12): 2109-2118 DOI
(2013).
-
Diamond optics for direct imaging of extrasolar planets.
I Optics & Photonics in Sweden, October 22-23, 2013, Uppsala, Sweden
(2013).
-
Nanodevices based on use of few molecules.
I French-Swedish Molecular Electronics Symposium, Uppsala, May 2013. .
(2013).
-
Analysis of structure and magnetic moments in the TEM.
I Ecotopia conference, Nagoya, Japan, .
(2013).
-
The effect of Si-doping on the release of antibiotic from hydroxyapatite coatings.
Journal of Biomaterials and Nanobiotechnology, 4(3): 237-241 DOI
(2013).
-
Effect of strontium ions on the early formation of biomimetic apatite on single crystalline rutile.
Applied Surface Science, 266: 199-204 DOI
(2013).
-
Influence of surface treatments on the bioactivity of Ti.
Biomaterials, 2013: 205601- DOI
(2013).
-
Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal®V modified with linoleic acid.
European Cells and Materials
(2013).
-
Comparative characterization of oligomeric precursors intended for injectable implants.
Polymers for Advanced Technologies, . 24(1): 15-21 DOI
(2013).
-
L '-band AGPM vector vortex coronagraph's first light on VLT/NACO Discovery of a late-type companion at two beamwidths from an F0V star.
Astronomy and Astrophysics, 552: L13- DOI
(2013).
-
High Contrast Imaging with the New Vortex Coronagraph on NACO.
The Messenger (ESO), 152: 8-13
(2013).
-
Companion search around β Pictoris with the newly commissioned L’-band vector vortex coronagraph on VLT/NACO.
I Proceedings of the International Astronomical Union, June 2-7, 2013, Victoria, Canada, 50-51 DOI
(2013).
-
Small-angle, high-contrast exoplanet imaging with the L-band AGPM vector vortex coronagraph now offered at the VLT.
I Proceedings of the society of photo-optical instrumentation engineers (SPIE) 8864 88640 (2013), Techniques and Instrumentation for Detection of Exoplanets VI, August 26-29, 2013, San Diego, CA, USA, 1-9 DOI
(2013).
-
Inflammatory response to calcium phosphate cements with patterned surfaces.
I Scandinavian Society for Biomaterials Conference
(2013).
-
Immune responses to topographically different calcium phosphate cements.
European Cells and Materials, 26(Supp.2): 19-19
(2013).
-
Interlayer structure in YBCO-coated conductors prepared by chemical solution deposition.
Superconductors Science and Technology, 26(7): 075016- DOI
(2013).
-
Refractive and diffractive diamond optics.
I Mildren Richard P. and Rabeau James R., Macquarie University, Australia (red.) Optical Engineering of Diamond, . 109-142
(2013).
-
Microstructural, mechanical and tribological characterisation of roll materials for the finishing stands of the hot strip mill for steel rolling.
Wear, 307(1-2): 209-217 DOI
(2013).
-
An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling.
Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, 227(8 SI): 837-844 DOI
(2013).
-
On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr).
International journal of refractory metals & hard materials, 40(SI): 24-26 DOI
(2013).
-
The asymmetrical friction mechanism that puts the curl in the curling stone.
Wear, . 301(1-2): 583-589
(2013).
-
The asymmetrical friction mechanism that puts the curl in the curling stone.
I Wear of Materials 2013 .
(2013).
-
The asymmetrical friction mechanism that puts the curl in the curling stone.
Wear, . 301(1-2): 583-589 DOI
(2013).
-
Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models.
Tribology letters, 50(3): 379-385 DOI
(2013).
-
Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings.
I 19th International Conference on Wear of Materials 2013; 14-18 April 2013; Portland, OR, USA .
(2013).
-
Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings.
Wear, . 302(1-2 SI): 987-997 DOI
(2013).
-
Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings.
Surface & Coatings Technology, 222: 48-54 DOI
(2013).
-
Compressive stresses in cemented carbide.
Student thesis, 2013 Download fulltext -
Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field.
I 19th International Conference on Wear of Materials
(2013).
-
Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field.
Wear, 302(1-2 SI): 1345-1350 DOI
(2013).
-
Optoelectronic properties of p-i-n heterojunctions based on germanium nanocrystals.
Journal of Applied Physics, 114(3): 033510- DOI
(2013).
-
Nanoscale Size Control of Protein Aggregates.
Small, . 9(19): 3320-3326 DOI
(2013).
-
Silicon nanocrystals: Novel synthesis routes for photovoltaic applications.
Physica status solidi. A, Applied research, 210(4): 649-657 DOI
(2013).
-
Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook.
Journal of materials science. Materials in medicine, 24(1): 1-10 DOI
(2013).
-
Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements.
Surface & Coatings Technology, 235: 827-834 DOI
(2013).
-
Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses.
I 19th International Conference on Wear of Materials (WOM), Portland, United States, 14–18 April 2013
(2013).
-
Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements.
Journal of The Mechanical Behavior of Biomedical Materials, 25: 41-47 DOI
(2013).
-
Hydrothermal growth of ZnO hexagonal nanocrystals: Effect of growth conditions.
Journal of Nano Research, 21: 57-63 DOI
(2013).
-
Tribological Aspects of Pneumatic Clutch Actuators.
Diss. Download fulltext
(2013).
-
Friction, wear and surface damage mechanisms of pneumatic clutch actuators.
Wear, 305(1-2): 36-44 DOI
(2013).
-
Epitaxial Single and Double Nanolayers of SnO2 and TiO2 for Resistive Gas Sensors.
IEEE Sensors Journal, 13(5): 1648-1655 DOI
(2013).
-
Real time contact resistance measurement to determine when microwelds start to form during ultrasonic wire bonding.
Microelectronic Engineering, 104: 114-119 DOI
(2013).
-
Model test for fabrication and separation of wear particles in hip implants.
Student thesis, 2013 Download fulltext -
Variation in Calvarial Bone Healing Capacity: A Clinical Study on the Effects of BMP-2-Hydrogel or Bone Autograft Treatments at Different Cranial Locations.
The Journal of craniofacial surgery (Print), 24(2): 339-343 DOI
(2013).
-
Solution-based synthesis of AgI coatings for low-friction applications.
Journal of Materials Science, 48(5): 2236-2244 DOI
(2013).
-
Influence of Ti addition on the structure and properties of low-friction W–S–C coatings.
Surface & Coatings Technology, . 232: 340-348 DOI
(2013).
-
Tribochemically Active Ti–C–S Nanocomposite Coatings.
Materials Research Letters, . 1(3): 148-155 DOI
(2013).
-
Tribochemically active Ti-C-S nanocomposites – a new concept for self-lubricating coatings.
I International Conference on Metallurgical Coatings and Thin Films (40th ICMCTF)
(2013).
-
Tribochemically active Ti-C-S coatings.
I Wear of Materials (WOM 2013)
(2013).
-
Energy-loss Magnetic Circular Dichroism on a magnetite-encapsulated Fe thin film.
I Annual Meeting of the Nordic Microscopy Society, Copenhagen, 2013. Copenhagen: Nordic Microscopy Society, Copenhagen.
(2013).
-
Hydroxyapatite Coating with Li+ Affects the Wnt Signaling Pathway in vivo.
I TERMIS 2013
(2013).
-
Synergetic inactivation of Staphylococcus epidermidis and Streptococcus mutans in a TiO2/H 2O2/UV system.
Biomatter, 3(4): e26727- DOI
(2013).
-
Stability and prospect of UV/H2O2 activated titania films for biomedical use.
Applied Surface Science, 285(Part B): 317-323 DOI
(2013).
-
Formulations for freeze-drying of bacteria and their influence on cell survival.
Journal of Visualized Experiments DOI
(2013).
-
Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone.
Journal of The Mechanical Behavior of Biomedical Materials, 27: 43-53 DOI
(2013).
-
Ion Substitution of Bioceramics: The Role of Ions.
Journal of Powder Metallurgy & Mining, 2(2): e111-
(2013).
-
Bioceramic in Dentistry and Orthopedics: ”OLD”/”NEW”.
I Materials for Tomorrow 2013
(2013).
-
Hollow calcium phosphate particles.
Pat. us USA US10130566B2 (2018-11-20)
(2013).
-
Biological properties of ion substituted apatite coatings.
I 37th International Conference and Expo on Advanced Ceramics and Composites
(2013).
-
Apatite Coatings: Ion Substitution and Biological Properties.
Advanced in Bioceramics and Porous Ceramics
(2013).
-
Noncovalent Functionalization of Graphene in Suspension.
ISRN Organic Chemistry DOI
(2013).
-
Influence of particle size on hardening and handling of a premixed calcium phosphate cement.
Journal of materials science. Materials in medicine, 24(4): 829-835 DOI
(2013).
-
Setting mechanisms of an acidic premixed calcium phosphate cement.
Bioceramics Development and Applications, 3(1): 1000070- DOI
(2013).
-
Prediction of porosity in hydroxyapatite and brushite cements.
I 25th symposium of the European Society for Biomaterials
(2013).
-
Porosity prediction of calcium phosphate cements.
I 6th annual meeting of the Scandinavian Society for Biomaterials
(2013).
-
Premixed calcium phosphate cement as a carrier of bone morphogenetic protein.
I Bruker MicroCT Meeting
(2013).
-
EP patent.
Pat. EP2271914
(2013).
-
Transmission Electron Microscopy of Graphene and Hydrated Biomaterial Nanostructures: Novel Techniques and Analysis.
Diss. Download fulltext
(2012).
-
Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries.
Tribologia, 31 31(1-2 1-2): 22 22-31 31
(2012).
-
Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles.
Surface & Coatings Technology, 206(8-9): 2325-2329 DOI
(2012).
-
Bone tissue reactions to biomimetic ion-substituted apatite surfaces on titanium implants.
Journal of the Royal Society Interface, 9(72): 1615-1624 DOI
(2012).
-
Silicon nanocrystals on amorphous silicon carbide alloy thin films: Control of film properties and nanocrystals growth.
Thin Solid Films, . 522: 136-144 DOI
(2012).
-
Development of a visible light active photocatalytic portable water purification unit using ZnO nanorods.
Catalysis Science & Technology, 2(5): 918-921 DOI
(2012).
-
On wear resistance of tool steel.
Journal of Manufacturing Processes, 14(3): 195-198 DOI
(2012).
-
A New Drug Release Method in Early Development of Transdermal Drug Delivery Systems.
Pain Research and Treatment, . 2012: 953140- DOI
(2012).
-
A new screening in-vitro method to study drug release in early development of transdermal drug delivery systems.
European Cells and Materials, 23(Suppl. 5): 22-
(2012).
-
Analyzing the viability of bacteria after TiO2 induced photocatalysis.
I Scandinavian Society for Biomaterials 5th annual meeting, 2012, Uppsala, Sweden
(2012).
-
Analyzing the viability of bacteria after TiO2 induced photocatalysis.
European Cells and Materials, 23(Suppl.5): 31-
(2012).
-
TiO2 surface for biofilm elimination, quantified by a novel method.
I 9th World Biomaterials Congress, June 1-6, Chengdu, China
(2012).
-
A diamond AGPM coronagraph for VISIR.
I Proceedings of SPIE, 84468K- DOI
(2012).
-
Rostfritt stål till stora vattentankar utomhus: En jämförelse mellan austenitiska och rostfria stål.
Student thesis, 2012 Download fulltext -
Evaluation of HVAF sprayed STR coatings.
Student thesis, 2012 Download fulltext -
Polymers influencing the strength of injectable calcium phosphate bone cements-a preliminary study.
I 22nd Interdisciplinary Research Conference on Biomaterials May 10th -12th, 2012, Uppsala, Swden.European Cells and Materials Vol 23 Suppl 3 2012 (page 32), 32-
(2012).
-
Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials.
Biomedical Materials, 7(3): 035013- DOI
(2012).
-
Hydroxyapatite formation on a novel dental cement in human saliva.
ISRN Dentistry, 624056- DOI
(2012).
-
Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing.
lic.-avh.
(2012).
-
CVD of bonding and template layers for thenucleation of well adhering α-Al2O3.
Surface and Coatings Technology Accepted.
(2012).
-
Influence of CVD Al2O3 coated tool surface micro topography on the tribological characteristics in metal cutting – Part I.
Wear Accepted.
(2012).
-
Influence of CVD Al2O3 coated tool surface micro topography on the tribological characteristics in metal cutting – Part II.
Wear Accepted.
(2012).
-
Microstructural, Mechanical and Tribological Characterisation of CVD and PVD Coatings for Metal Cutting Applications.
Diss. Download fulltext
(2012).
-
Wear study of coated heavy duty exhaust valve systems in a experimental test rig.
I SAE 2012 World Congress & Exhibition
(2012).
-
Protective tribofilm build up from exhaust residues on the surface on exhaust valve systems in a test rig.
I Nordtrib, Trondheim, Norway, 2012
(2012).
-
Heavy duty exhaust valve simulation and evaluation in a test rig.
I Nordtrib, Trondheim, 2012
(2012).
-
Wear study of coated heavy duty exhaust valve systems in a experimental test rig.
SAE International technical papers DOI
(2012).
-
Photocatalytic and antimicrobial properties of a TiO2 implant coating deposited through cathodic arc evaporation.
European Cells and Materials, 23(Suppl. 5): 36-
(2012).
-
Photocatalytic and antimicrobial properties of a TiO2 implant coating deposited through cathodic arc evaporation.
I Scandinavian Society of Biomaterials, Uppsala, Sweden, May 2012
(2012).
-
A wear test mimicking the tribological situation in rock drilling.
Student thesis, 2012 Download fulltext -
Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel.
I 15th Nordic Symposium on Tribology, Trondheim, Norway
(2012).
-
Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations.
Tribology International, 52: 153-160 DOI
(2012).
-
Tribology at the Cutting Edge: A Study of Material Transfer and Damage Mechanisms in Metal Cutting.
Diss. Download fulltext
(2012).
-
Adhesion properties in the secondary shear zone in turning of austenitic stainless steel and carbon steel.
I Nordtrib 2012 - 15th Nordic Symposium on Tribology, Trondheim, Norway
(2012).
-
Biomimetic preparation and biomineralization of bioceramics.
I Advanced bioactive inorganic materials for bone regeneration and drug delivery .
(2012).
-
Nanoscale Osseointegration: Characterization of Biomaterials and their Interfaces with Electron Tomography.
Diss. Download fulltext
(2012).
-
Focused ion beam in the study of biomaterials and biological matter.
Advances in Materials Science and Engineering, 841961- DOI
(2012).
-
Ultrastructural characterization of the hydroxyapatite-coated pedicle screw and human bone interface.
International Journal of Nano and Biomaterials, 4(1): 1-11 DOI
(2012).
-
High-resolution three-dimensional probes of biomaterials and their interfaces.
Philosophical Transactions. Series A, 370(1963): 1337-1351 DOI
(2012).
-
Resolving the CaP-bone interface: A review of discoveries with light and electron microscopy.
Biomatter, 2(1): 15-23 DOI
(2012).
-
Bone response to free form fabricated hydroxyapatite and zirconia scaffolds: a transmission electron microscopy study in the human maxilla.
Clinical Implant Dentistry and Related Research, 14(3): 461-469 DOI
(2012).
-
Mesoporous titania implant coatings with and without calcium and strontium ion incorporation.
I Scandinavian Society for Biomaterials (ScSB) Annual Meeting
(2012).
-
Friction and wear behaviour of low-friction coatings in conventional and alternative fuels.
Tribology International, 48: 22-28 DOI
(2012).
-
Smart DLC coating top coating for reduction of counter surface wear in fuel contact.
I Faraday Discussion 156: Tribology
(2012).
-
How tribological propertiesof DLC coatings vary in different engine oils at elevated temperature.
I Nordtrib, Trondheim, Norge
(2012).
-
Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact.
Tribology - Materials, Surfaces & Interfaces, 6(3): 102-108 DOI
(2012).
-
Tribology of selenium-based solid lubricants alloyed with carbon.
I Advances in lubrication, Costa Rica
(2012).
-
Improved gas sensing activity in structurally defected bilayer graphene.
Nanotechnology, 23(50): 50550- DOI
(2012).
-
Clean forming of stainless steel and titanium products by lubricious oxides.
I Proceedings of NORDTRIB Trondheim: NTNU.
(2012).
-
On Transfer of Work Material to Tools.
Diss. Download fulltext
(2012).
-
Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts.
Tribology International, 56: 9-18 DOI
(2012).
-
Mechanisms of transfer of aluminium to PVD-coated forming tools.
Tribology letters, 46(3): 299-312 DOI
(2012).
-
Evaluation of TiB2 coatings in cold forming of aluminium.
Surface Engineering, 28(7): 517-525 DOI
(2012).
-
Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM.
I Nordtrib, Trondheim, Norway, 2012
(2012).
-
New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM.
Wear, 292-293: 61-73 DOI
(2012).
-
Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming.
Wear, 49-60 DOI
(2012).
-
Self-supporting nanoporous alumina membranes as substrates for hepatic cell cultures.
Journal of Biomedical Materials Research. Part A, 100A(9): 2230-2238 DOI
(2012).
-
On the residual stresses vs. hardness of tribological surfaces.
I Nordtrib 2012 - 15th Nordic Symposium on Tribology, Trondheim, Norway
(2012).
-
In vivo and in vitro performance of Sr-doped hydroxyapatite composite in the form of hollow nano-spheres.
I Scandinavian Society for Biomaterials (ScSB) 5th Annual Meeting, Clarion Hotel Gillet, Uppsala Sweden, May 8-9, 2012
(2012).
-
Bone forming potential of Sr doped hydroxyapatite hollow spheres in a rat vertebral bone defect model.
Bone, 50(supplement 1): S114- DOI
(2012).
-
Coatings and surface treatments: interaction with lubricants.
I R W Bruce (red.) The Handbook of Lubrication and Tribology, . 41-1-41-13
(2012).
-
Nanoparticle Bridges for Studying Electrical Properties of Organic Molecules.
I Soloviev, M. (red.) Nanoparticles in Biology and Medicine, . 535-546 DOI
(2012).
-
Influence of drug distribution and solubility on release from geopolymer pellets: A finite element method study.
Journal of Pharmaceutical Sciences, 101(5): 1803-1810 DOI
(2012).
-
Polymer excipients enable sustained drug release in low pH from mechanically strong inorganic geopolymers.
Results in Pharma Sciences, . 2: 23-28 DOI
(2012).
-
Tribological requirements for selection of new materials for electrical connectors.
I NordTrib 2012, Trondheim, Norge
(2012).
-
Atomic layer deposition of Ru films from bis(2,5-dimethylpyrrolyl)ruthenium and oxygen.
Thin Solid Films, 520(7): 2756-2763 DOI
(2012).
-
Reciprocal space signals arising from interference of core-loss electrons in the EMCD geometry.
I Proceedings of International Workshop on EELS in Materials Science, Uppsala, Sweden. Uppsala: Uppsala University.
(2012).
-
A site-specific FIB lift-out method for cryo-TEM imaging.
I Proceedings of Cryo Focussed Ion Beam Workshop, Vlaardingen, Netherlands, April 2012. Netherlands: Cryo Focussed Ion Beam Workshop, Vlaardingen, Netherlands.
(2012).
-
Development and use of a cryo‐FIB‐cryo‐technique for site‐specific.
I Cryo Microscopy Group Annual Meeting, Birmingham, UK, November 2012. UK: Cryo Microscopy Group Annual Meeting, Birmingham.
(2012).
-
Graphene and particle-beam modified graphene devices.
I Swedish Graphene Workshop, Göteborg, November 2012.
(2012).
-
A 10-nm sized molecular electronics platform for applied and fundamental molecular property measurements.
I Proceedings of Elecmol conference, Grenoble, 2012. .
(2012).
-
Quantitative assessment of EMCD signals in real and reciprocal space in single and multilayer samples.
I D. J. Stokes and W. M. Rainforth (red.) Proceedings of the 15th European Microscopy Congress: Volume 2: Physical Sciences: Tools and Techniques, 727-728
(2012).
-
Photocatalytic and antimicrobial properties of surgical implant coatings of titanium dioxide deposited though cathodic arc evaporation.
Biotechnology letters, 41(6): 740-746 DOI
(2012).
-
Photocatalytic and bioactive TiO2 thin films deposited by vaccum arc.
I Scandinavian Society of Biomaterials 2012, Uppsala
(2012).
-
Effect of deposition parameters on the photocatalytic activity and bioactivity of TiO(2) thin films deposited by vacuum arc on Ti-6Al-4V substrates.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 100B(4): 1078-1085 DOI
(2012).
-
Photocatalytic and bioactive TiO2 thin films deposited by vacuum arc.
European Cells and Materials, Aberystwyth: University of Wales. 23(Suppl. 5): 48-
(2012).
-
Biomimetic Deposition of Hydroxyapatite on Titanium Implant Materials.
Diss. Download fulltext
(2012).
-
Apatite coating co-doped with strontium and fluoride using a biomineralization method.
I Scandinavian Society for Biomaterials (ScSB) Annual Meeting
(2012).
-
Strontium and silicon co-doped apatite coating:: Preparation and as vehicles for ion delivery.
Journal of Biomaterials and Nanobiotechnology, 3(3): 335-341 DOI
(2012).
-
Incorporation of active ions into calcium phosphate coatings, their release behavior and mechanism.
Biomedical Materials, 7(4): 045018- DOI
(2012).
-
Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal®V modified with linoleic acid.
I GRIBOI
(2012).
-
Bioactive hybrids based on polyhedral oligomeric silsesquioxane intended as bone fillers.
I 9th World Biomaterials Congress, Chengdu China, June 1-5, 2012
(2012).
-
Acrylic bone cement modified with oligo (trimethylene carbonate).
I 5th Annual Meeting of the Scandinavian Society for Biomaterials, Uppsala Sweden, May 8-9, 2012
(2012).
-
Strontium halides as degradable radiopacifiers.
I The 22nd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone
(2012).
-
A self-hardening biodegradable cement as a drug delivery vehicle.
European Cells and Materials, 23(S5): 51-51
(2012).
-
Local delivery of Simvastatin from calcium phosphate cement.
I R. Geoff Richards (red.) 22nd Interdisciplinary Research Conference on Biomaterials Groupe de Recherche Interdisciplinaire sur les Biomatériaux Ostéo-articulaires Injectables (GRIBOI)Uppsala, Sweden, May 10th – 12th, 2012, 48-
(2012).
-
Premixed acidic calcium phosphate cement: delivery system for simvastatin.
I R. Geoff Richards (red.) eCM XIII Bone Fixation, Repair & RegenerationJune 24-26, 2012, Convention Centre, Davos Platz, Switzerland, 57-
(2012).
-
Tribology in Metal Working.
lic.-avh. Download fulltext
(2012).
-
FGF1 containing biodegradable device with peripheral nerve grafts induces corticospinal tract regeneration and motor evoked potentials after spinal cord resection.
Restorative Neurology and Neuroscience, 30(2): 91-102 DOI
(2012).
-
Calculated trajectories of curling stones sliding under asymmetrical friction.
I Nordtrib 2012, 15th Nordic Symposium on Tribology
(2012).
-
Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings.
I Nordtrib 2012, 15th Nordic Symposium on Tribology
(2012).
-
Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study.
I Nordtrib 2012, 15th Nordic Symposium on Tribology, Trondheim, June 12-15 2012
(2012).
-
Tribofilm formation of lightly loaded self mated alumina contacts.
Wear, 289: 39-45 DOI
(2012).
-
Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement.
Biomatter, . 2 2(2 2): 94 94-102 102 DOI
(2012).
-
The influence of grain size and surface treatment of the tribofilm formation on alumina components.
Wear, . 292: 17-24 DOI
(2012).
-
Fabrication and evaluation of SixNy coatings for total joint replacements.
Journal of materials science. Materials in medicine, 23(8): 1879-1889 DOI
(2012).
-
Commercially Available Dental Implants: Review of Their Surface Characteristics.
JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING, 2(2): 112-124 DOI
(2012).
-
Bone-titanium oxide interface in humans revealed by transmission electron microscopy and electron tomography.
Journal of the Royal Society Interface, 9(67): 396-400 DOI
(2012).
-
Treatment of low back pain using injectable, load-bearing materials – a review and outlook for future strategies.
I 6th World Congress of World Institute of Pain, Miami Beach, Florida, USA
(2012).
-
Nano grain sized zirconia–silica glass ceramics for dental applications.
Journal of the European Ceramic Society, 32(16): 4105-4110 DOI
(2012).
-
Spark plasma sintered beta-phase silicon nitride with Sr and Ca as a sintering aid for load bearing medical applications.
Journal of the European Ceramic Society, 32(11): 2705-2709 DOI
(2012).
-
Mechanical properties of SixNy- and SixCyNz-coatings for total joint replacements.
I 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012.
(2012).
-
Complex frictional analysis of self-lubricant W-S-C/Cr coating.
Faraday discussions, 156: 383-401 DOI
(2012).
-
Tribological testing of DLC coatings for automotive applications.
Student thesis, 2012 Download fulltext -
Comparison of anodised aluminium surfaces from four fabrication methods.
Journal of Materials Processing Technology, . 212(11): 2272-2281 DOI
(2012).
-
A site-specific focused-ion-beam lift-out method for cryo Transmission Electron Microscopy.
Journal of Structural Biology, 180(3): 572-576 DOI
(2012).
-
On the Machinability of High Performance Tool Steels.
Diss. Download fulltext
(2012).
-
Studie av belagda kolvringarmot plasmasprutat cylinderfoder: Med avseende på friktion och nötningsmotstånd.
Student thesis, 2012 Download fulltext -
Sulfur-doping of nc-TiC/a-C films by reactive sputtering.
I Thirteenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012
(2012).
-
Mechanisms responsible for compositional variations of films sputtered from a WS2 target.
I International Conference on Metallurgical Coatings and Thin films (ICMCTF) 23-27/04 2012, San Diego, abstract number:428
(2012).
-
Structural characterization of mesoporous titania containing silver nanoparticle inclusions for antibacterial implant applications.
I D. J. Stokes and W. M. Rainforth (red.) Proceedings of the 15th European Microscopy Congress, 665-666
(2012).
-
Structural characterization of mesoporous titania containing silver nanparticle inclusions for antibacterial implant applications.
I Scandinavian Society for Biomaterials 5th Annual meeting, Uppsala, Sweden, May 8-9, 2012
(2012).
-
The defect landscape and self-ordering mechanism of solid lubricant coatings exhibiting superlubricity.
I D. J. Stokes and W. M. Rainforth (red.) Proceedings of the 15th European Microscopy Congress, 493-494
(2012).
-
Structural and EMCD analysis of Fe/V multilayers.
I D. J. Stokes and W. M. Rainforth (red.) Proceedings of the 15th European Microscopy Congress, 277-278
(2012).
-
Micro scratch testing of silicon nitride and silicon carbon nitride coatings.
I Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012.
(2012).
-
Antibacterial Properties of Dental Luting Agents: Potential to Hinder the Development of Secondary Caries.
International Journal of Dentistry, . 2012: 529495- DOI
(2012).
-
Antibacterial properties of contemporary dental luting agents.
European Cells and Materials, Davos, Switzerland: AO Foundation. 23(S5): 64-64
(2012).
-
Low temperature oxidation and photocatalytic activity of Ti-6Al-4V.
I 9th World Biomaterials Congress, June 1-5, 2012, Chengdu, China
(2012).
-
Photocatalytic activity of low temperature oxidized Ti-6Al-4V.
Journal of materials science. Materials in medicine, 23(5): 1173-1180 DOI
(2012).
-
Tribological testing of rotary drill bit inserts.
Student thesis, 2012 Download fulltext -
Bioactive and photocatalytically active surgical implant surfaces.
I Euro Bio-inspired Materials, International School and Conference on Biological Materials Science, 20-23 March
(2012).
-
Graphene Formation by Sonochemical Exfoliation of Bromine-intercalated Graphite . Influence of Solvent Properties on Exfoliation Yield and Deposition Outcome.
Chemistry - A European Journal,, 200: 1-8 DOI
(2012).
-
Evaluation of CaP spherical particles on rat osteoblasts.
I Michael Riediker (red.) 4th NanoImpactNet Integrating Conference and the 1st QNano Integrating Conference, "From theory to practice - development, training and enabling nanosafety and health research", UCD Dublin, Ireland, 27 February - 2 March, 2012, 120-120
(2012).
-
Strontium doped calcium phosphate spheres: dentinal tubules filler and tooth remineralization.
I 9th World Biomaterials Congress
(2012).
-
Mesoporous titanium dioxide coating for metallic implants.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 100B(1): 82-93 DOI
(2012).
-
Highly packed and aligned fluoride substituted hydroxyapatite via a surfactant-free process.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, 100B(1): 75-81 DOI
(2012).
-
Morphology control of hydroxyapatite crystal and its aggregates.
I Hydroxyapatite .
(2012).
-
Calcium phosphate sphere/PMMA composite: preparation, ion and drug release.
I Scandinavian Society for Biomaterials (ScSB) Annual Meeting
(2012).
-
Translucent zirconia-silica glass ceramics for dental crowns.
I Proceedings of the 36th International Conference and Expo on Advanced Ceramics and Composites
(2012).
-
Nano grain sized silica-zirconia glass ceramics for dental applications.
I 36th International Conference and Expo on Advanced Ceramics and Composites
(2012).
-
The visualization of Silicon nanoparticles by 3D electron tomography.
I European Microscope Conference at Manchester, UK .
(2012).
-
The visualization of Silicon nanoparticles by 3D electron tomography: use of mass-thickness contrast bright field imaging.
I 15th European Microscopy Congress Manchester Central, United Kingdom.
(2012).
-
Transmission Electron Microscopy for characterization of innovative nanocomposites for solar cell applications.
I 1st International Workshop on TEM Spectroscopy in the Materials Sciences, Uppsala, Sweden
(2012).
-
The visualization of Silicon nanoparticles by 3D electron tomography.
I European Microscopy Congress, Manchester, 2012
(2012).
-
Transmission Electron Microscopy for characterization of innovative nanocomposites for solar cell applications.
I EELS workshop, Uppsala, 18th-20th June 2012
(2012).
-
Development of multifunctional hyaluronic acid-based carriers by 'click' chemistry.
Journal of Tissue Engineering and Regenerative Medicine, 6(suppl 1): 191-192 DOI
(2012).
-
Direct ”Click” Synthesis of Hybrid Bisphosphonate-Hyaluronic Acid Hydrogel in Aqueous Solution for Biomineralization.
Chemistry of Materials, 24(9): 1690-1697 DOI
(2012).
-
Bacteria-surface interactions: methodological development for the assessment of implant surface treatments.
I ICAR (International Conference on Antimicrobial Research) 2012
(2012).
-
Understanding the influence of alendronate on the morphology and phase transformation of apatitic precursor nanocrystals.
Journal of Inorganic Biochemistry, 113: 1-8 DOI
(2012).
-
Titanium carbide derived nanoporous carbon for supercapacitor applications.
International journal of hydrogen energy, 37(24): 19395-19400 DOI
(2012).
-
ANS Triboconditioning: In-Manufacture Running-in Process for Improving Tribological Properties of Mechanical Parts made of Steel and Cast Iron.
I 18th International Colloquium Tribology – Industrial and Automotive Lubrication, Ostfildern, Germany
(2012).
-
Premixed Acidic Calcium Phosphate Cements.
Diss. Download fulltext
(2012).
-
Calcium sulphate spinal cord scaffold: a study on degradation and fibroblast growth factor 1 loading and release.
Journal of biomaterials applications, 26(6): 667-685 DOI
(2012).
-
Biocompatibility and resorption of a radiopaque premixed calcium phosphate cement.
Journal of Biomedical Materials Research. Part A, 100A(5): 1269-1278 DOI
(2012).
-
Paketering av väredepåsar: Automatisering av en manuell process.
Student thesis, 2012 Download fulltext -
AN EXPERIMENTAL METHOD TO CHARACTERISE KNEE STABILITY: PRELIMINARY TESTS WITH A PORCINE MODEL.
I 18th congress of the European Society of Biomechanics
(2012).
-
Tribological conditions of curling - the ultimate friction sport?.
I 18th International Conference on Wear of Materials, Philadelphia, USA, April 3-7, 2011
(2011).
-
Nanocomposites for Use in Sliding Electrical Contacts.
Diss. Download fulltext
(2011).
-
Friction and contact resistance of nanocomposite Ti-Ni-C coatings.
Wear, 270(9-10): 555-566 DOI
(2011).
-
Nanoindentation on micro pillars for determination of residual stress conditions of PVD coatings.
I 18th International Conference on Wear of Materials, Philadelphia, USA
(2011).
-
Dental Implant Surfaces Implant Dentistry - A Rapidly Evolving Practic: Physicochemical Properties, Biological Performance, and Trends.
I Ilser Turkyilmaz (red.) Implant Dentistry .
(2011).
-
Conduction properties of graphene as a function of ion irradiation and acid treatment.
I Graphene 2011 - 11th to 14th April 2011. Bilbao, Spain.
(2011).
-
An In-Situ Prepared Nano-Manipulator Tip for Electrical Characterization of Free Standing Graphene Like Sheets Inside a Focused Ion Beam/Scanning Electron Microscope.
Journal of Nanoelectronics and Optoelectronics, . 6(2): 162-168 DOI
(2011).
-
Biofilm susceptibility to photocatalytic dental mateirals.
European Cells and Materials, 21(Suppl.1): 55-
(2011).
-
Biofilm elimination and detachment using photocatalytic TiO2 surfaces.
I Conference
(2011).
-
Biofilm susceptibility to photocatalytic dental mateirals.
I Conference
(2011).
-
A dental cement capable of calcium phosphate formation on its surface during water storage.
I European Cells and Materials, 35-
(2011).
-
Role of Alumina Nanoporosity in Acute Cell Response.
Journal of Nanoscience and Nanotechnology, 11(8): 6698-6704 DOI
(2011).
-
Wear mechanism study of exhaust valve system in modern heavy duty combustion engines.
Wear, 271(9-10): 2477-2484 DOI
(2011).
-
In Vivo Evaluation of Functionalized Biomimetic Hydroxyapatite for Local Delivery of Active Agents.
Journal of Biomaterials and Nanobiotechnology, 2(2): 149-154 DOI
(2011).
-
Co-loading of bisphosphonates and antibiotics to a biomimetic hydroxyapatite coating.
Biotechnology letters, 33(6): 1265-1268 DOI
(2011).
-
A Soluble Strontium Carbonate Implant Coating for Local and Targeted Cell Stimulation.
I MRS Spring Meeeting 2011
(2011).
-
Synthetic geopolymers for controlled delivery of oxycodone: Adjustable and nanostructured porosity enables tunable and sustained drug release.
PLoS ONE, 6(3): e17759- DOI
(2011).
-
Sustained Drug Release from Mesoporous Geopolymers.
I MRS Spring Meeting and Exhibit 2011
(2011).
-
Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry.
Tribologia, 30(1-2): 37-50
(2011).
-
Electron tomography: A tool for the study of osseointegration in 3D..
I Scandanavian Society for Biomaterials 4th Annual Meeting
(2011).
-
Three-dimensional structure of laser-modified Ti6Al4V and bone interface revealed with STEM tomography.
I Frontiers in Electron Microscopy in Materials Science
(2011).
-
Free form fabricated features on CoCr implants with and without hydroxyapatite coating in vivo: a comparative study of bone contact and bone growth induction.
Journal of materials science. Materials in medicine, 22(4): 899-906 DOI
(2011).
-
Hard low friction WSN coating deposited by magnetron sputtering: Sliding in dry nitrogen.
I Wear of Materials, Philadephia
(2011).
-
Evaluation of TiB2 coatings in cold forming of aluminium.
I International Conference on Technology of Plasticity (ICTP), September 25-30, 2011, Aachen, Germany
(2011).
-
The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium.
Wear, 271(9-10): 2517-2524 DOI
(2011).
-
The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium.
I Wear of Materials Conference, Philadelphia, Pennsylvania, USA
(2011).
-
DLC coatings for fule injection components to minimize wear and friction in various fuels.
I ICMCTF, San Diego
(2011).
-
In Vivo Acute Inflammatory Response to Nanoporous Alumina.
I 24th European Conference on Biomaterials, Dublin, September 04-08, 2011.
(2011).
-
Effects of a natural oil on the mechanical properties and cytotoxicity of PMMA bone cement.
I Annual Meeting of the Scandinavian Society for Biomaterials, 23-
(2011).
-
Calcium phosphates compounds in conjunction with hydrogel as carrier for BMP-2: A study on ectopic bone formation in rats.
Acta Biomaterialia, 7(8): 3042-3049 DOI
(2011).
-
The brake pad surface – dynamic materials formation, disintegration and regeneration at the nanoscale.
I J. Bijwe (red.) Advances in asbestos-free friction composites III
(2011).
-
Control of junction resistances in molecular electronic devices fabricated by FIB.
Microelectronic Engineering, 88(8): 2629-2631 DOI
(2011).
-
Building Systems for Electronic Probing of Single Low Dimensional Nano-objects: Application to Molecular Electronics and Defect Induced Graphene.
Diss. Download fulltext
(2011).
-
Design of carbide-based nanocomposite thin films by selective alloying.
Surface & Coatings Technology, 206(4): 583-590 DOI
(2011).
-
Toughness of Tool Steel.
Diss.
(2011).
-
Assessment interfacial magnetic moments by EMCD with down to atomic scale resolution – What do we have? What do we need?.
I Proceedings of Microscopy Conference, Kiel, Germany, September 2011. Germany: Microscopy Conference, Kiel, Germany.
(2011).
-
Analysis of structure and magnetic moments of magnetic nanomaterials in the transmission electron microscope.
I Proceedings of Conference on Modern Magnetism, Orange County, India, November 2011. India: Orange Country, India.
(2011).
-
Analysis of inner fields in the TEM – strain and EMCD measurements.
I Workshop on density functional theory and transmission electron microscopy DFTEM, Lausanne, July, 2011. .
(2011).
-
Modification of electrical properties graphene by of defect insertion.
I Proceedings Graphene Workshop, Bilbao, Spain, 2011. Spain: Graphene Workshop, Bilbao, Spain, 2011..
(2011).
-
ANALYSIS OF A COPPER SAMPLE FOR THE CLIC ACS STUDYIN A FIELD EMISSION SCANNING MICROSCOPE.
CERN
(2011).
-
Measurement of the EMCD signal in real and reciprocal space.
I Proceedings of Microscopy Conference, Kiel, Germany, 2011. Kiel, Germany,: Microscopy Conference, Kiel, Germany,.
(2011).
-
Influence of microstructure and chemical composition of sputter deposited TiO2 thin films on in vitro bioactivity.
Journal of materials science. Materials in medicine, . 22(12): 2727-2734 DOI
(2011).
-
Low-modulus PMMA bone cement modified with castor oil.
Bio-medical materials and engineering, . 21(5-6): 323-332 DOI
(2011).
-
Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation.
Journal of materials science. Materials in medicine, 22(6): 1599-1606 DOI
(2011).
-
Assessing the mechanical and electrical properties of aluminium oxide on aluminium using nanoindentation and nanoscratching.
I Wear of materials
(2011).
-
Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications.
I International Conference on Metallurgical Coatings and Thin Films, ICMCTF
(2011).
-
Instrumental developments for in situ breakdown experiments inside a scanning electron microscope.
Nuclear Instruments and Methods in Physics Research Section A, 657(1): 122-125 DOI
(2011).
-
Tribological testing of some potential PVD and CVD coatings for steel wire drawing dies.
Wear, 273(1): 55-59 DOI
(2011).
-
On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation.
Wear, . 271(9-10): 204-2057 DOI
(2011).
-
On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation.
I Wear of Materials .
(2011).
-
Tribological testing of drill bit inserts.
Student thesis, 2011 Download fulltext -
Premixed calcium silicate cement for endodontic applications.
Biomatter, 1(1): 76-80 DOI
(2011).
-
Premixed calcium silicate cement for endodontic applications: Injectability, setting time and radiopacity.
Biomatter, 1(1): 76-80
(2011).
-
Premixed calcium silicate cements for endodontic applications..
I 4h annual meeting of the Scandinavian Society for Biomaterials - Biomaterials go nano, . 25-25
(2011).
-
The effect of castor oil on spinal bone cement properties.
I The 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California
(2011).
-
The effect of castor oil on spinal bone cement properties.
I The 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California
(2011).
-
Towards Low-Modulus Bone Cements – The Effect of a Natural Oil in PMMA.
I 21st GRIBOI Congress, Boston, USA
(2011).
-
Towards Low-Modulus Bone Cements - the effect of a natural oil in PMMA.
I 21st GRIBOI Congress, Boston, USA
(2011).
-
Ball-on-disc testing of SiNx coatings for hip joint implants.
I The International Conference on BioTribology (ICoBT), Imperial Collage, London, September 18-21, 2011.
(2011).
-
Accurate and reliable soldier and first responder indoor positioning: multisensor systems and cooperative localization.
IEEE wireless communications, 18(2): 10-18
(2011).
-
First-principles atomistic study of surfaces of Fe-rich Fe-Cr.
Journal of Physics, 23(26): 265004- DOI
(2011).
-
Detection of Magnetic Circular Dichroism using TEM and EELS.
I 43rd Erice Crystallographic Course
(2011).
-
Influence of plural scattering on quantitative magnetic information measured by EMCD.
I 10th Multinational Congress on Microscopy, Urbino, Italy; 4-9 Sep. 2011, 43-44
(2011).
-
Local electronic structure information contained in energy-filtered diffraction patterns.
Physical Review B. Condensed Matter and Materials Physics, 84(6): 064444- DOI
(2011).
-
Influence of plural scattering on the quantitative determination of spin and orbital moments in electron magnetic chiral dichroism measurements.
Physical Review B. Condensed Matter and Materials Physics, 83(13): 132402- DOI
(2011).
-
Two-, Three-, and Four-Component Magnetic Multilayer Onion Nanoparticles Based on Iron Oxides and Manganese Oxides.
Journal of the American Chemical Society, 133(42): 16738-16741 DOI
(2011).
-
Effect of gallium grading in Cu(In,Ga)Se2 solar-cell absorbers produced by multi-stage coevaporation.
Solar Energy Materials and Solar Cells, 95(2): 721-726 DOI
(2011).
-
Immobilization of oligonucleotide-functionalized magnetic nanobeads in DNA-coils studied by electron microscopy and atomic force microscopy.
I L. Stanciu, S. Andreescu, T. Noguer, B. Liu (red.) MRS Online Proceedings Library DOI
(2011).
-
Quaternary W-S-C-Ti films for tribological applications.
I 15th International Conference on Thin Films, Kyoto, Japan, 8-11 November 2011
(2011).
-
Coronene Fusion by Heat Treatment: Road to Nanographenes.
The Journal of Physical Chemistry C, 115(27): 13207-13214 DOI
(2011).
-
The interface and defect structure of superconducting Ba(Fe1-xCox)2As2 thin films.
I Wolfgang Jäger (red.) Microscopy Conference 2011, 28 August – 02 September 2011, Kiel, Germany
(2011).
-
Photocatalytic Activity of Low Temperature Oxidized Ti-6Al-4V.
European Cells and Materials, 21(Suppl. 1): 20-20
(2011).
-
Formation and NMR Spectroscopy of ω-Thiol Protected α,ω-Alkanedithiol Coated Gold Nanoparticles and Their Usage in Molecular Charge Transport Junctions.
Langmuir, 27(14): 9057-9067 DOI
(2011).
-
Enabling measurements of low-conductance single molecules using gold nanoelectrodes.
Nanotechnology, . 22(12): 125707- DOI
(2011).
-
Impact of matrix properties on survival of freeze-dried bacteria.
Journal of the Science of Food and Agriculture, 91(14): 2518-2528 DOI
(2011).
-
Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool.
Acta Materialia, 59(1): 68-74 DOI
(2011).
-
Self-assembled hollow hydroxyapatite spheres for ion and drug delivery.
I 12th Conference of the European Ceramic Society – ECerS XII
(2011).
-
Ion substituted calcium phosphate particles.
Pat. WO2011016772A1
(2011).
-
Well-ordered mesoporous titanium dioxide coating for metallic implants.
I ORS 2011 (USA)
(2011).
-
Synthesis and release of trace elements from hollow and porous hydroxyapatite spheres.
Nanotechnology, 22(30): 305610- DOI
(2011).
-
Biomimetic Hydroxyapatite Deposition on Titanium Oxide Surfaces for Biomedical Application.
I Advances in Biomimetics .
(2011).
-
Preparation and characterization of ion doped calcium phosphate spheres.
I Scandinavian Society for Biomaterials (ScSB) Annual Meeting
(2011).
-
Preparation and characterization of ion doped calcium phosphate spheres.
European Cells and Materials, V21(S1): 52-
(2011).
-
In-vitro study of antibiotic and strontium release from hydroxyapatite spheres and its PMMA composite.
Student thesis, 2011 Download fulltext -
In vivo evaluation of an injectable premixed radiopaque calcium phosphate cement.
I EFORT
(2011).
-
Composition, properties and surface structure of tribochemically deposited coatings.
Student thesis, 2011 Download fulltext -
Ductile-brittle transition in micropillar compression of GaAs at room temperature.
Philosophical Magazine, 91(7-9): 1190-1199 DOI
(2011).
-
TEM investigations of attachment of functionalized magnetic nanoparticles to DNA-coils acting as a biosensor.
I Scandem 2010, Stockholm, Sweden, June 8-11
(2010).
-
Visualization of functionalization of nano-particles and graphene in the TEM.
I Advanced Materials Workshop 2010
(2010).
-
Real-Space Transmission Electron Microscopy Investigations of Attachment of Functionalized Magnetic Nanoparticles to DNA-Coils Acting as a Biosensor.
Journal of Physical Chemistry B, 114(41): 13255-13262 DOI
(2010).
-
Varför svänger stenen?: En studie i curlingens komplexa tribosystem.
Student thesis, 2010 Download fulltext -
Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions.
I Asiatrib 2010, Perth, Australia
(2010).
-
Early bone tissue responses to a slicon-substituted apatite/titanium dioxide coating on titanium implant.
I International Team for Implantology (ITI) World Symposium
(2010).
-
Bone responses to ions-substituted apatite/titanium dioxide coating on titanium implants.
I International Association for Dental Research (IADR)
(2010).
-
Fabrication and Applications of a Focused Ion Beam Based Nanocontact Platform for Electrical Characterization of Molecules and Particles.
Diss. Download fulltext
(2010).
-
Exfoliation, transfer and electrical characterization of graphene.
I Indian-Swedish Conference on Functional Materials, Uppsala, Sweden; 28-30 June 2010
(2010).
-
Dielectrophoretic trapping of gold nanoparticles on SAM-prepared nanogaps: A comparative study of different molecular systems.
I International Conference on Molecular Electronics, Emmetten, Switzerland (Jan 2010)
(2010).
-
A novel dental adhesive with bioactive and on-demand biofilm eliminating properties.
I International conference on Antimicrobial Research (ICAR 2010), 3-5 Novemver 2010, Valladolid, Spain, 185-
(2010).
-
The reagent-free, microwave-assisted purification of carbon nanotubes.
New Journal of Chemistry, 34(10): 2275-2280 DOI
(2010).
-
NanoEngineering with Graphene.
I 5th meeting of the Italian researchers in Sweden - Stockholm 26th February 2010
(2010).
-
Evaluation of galling resistance for some selected combinations of tool steels / stainless steel sheet materials/ lubricants using pin-on-disc testing.
I Elisabet Kassfeldt (red.) NordTrib 2010
(2010).
-
Tribological behaviour for low-friction coatings at conformal contact pressure in traditional and new-alternative fuels.
I ASIATRIB 2010, PERTH, WESTERN AUSTRALIA, 5-9 DECEMBER 2010
(2010).
-
The Uppsala Load Scanner –Second generation.
I Nordtrib 2010, Storforsen, Sweden
(2010).
-
A novel surface modification enabling local administration of strontium from implants.
I 23rd European Conference on Biomaterials (ESB) - 2010
(2010).
-
A novel method for local administration of strontium from implant surfaces.
Journal of materials science. Materials in medicine, 21(5): 1605-1609 DOI
(2010).
-
A ceramic drug delivery vehicle for oral administration of highly potent opioids.
Journal of Pharmaceutical Sciences, 99(1): 219-226 DOI
(2010).
-
A rapid method to improve the biological response to titanium by laser induced conversion of Ti4+ to Ti3+ sites in titanium oxide surfaces..
I Sicot/Sirot - Ortopediveckan 2010
(2010).
-
Electron tomography: A tool for the study of osseointegration in 3D.
I 19th Annual Scientific Meeting of the European Association for Osseointegration, Glasgow, United Kingdom, October 6-9, 2010
(2010).
-
Visualizing biointerfaces in three dimensions: electron tomography of the bone-hydroxyapatite interface.
Journal of the Royal Society Interface, 7(51): 1497-501 DOI
(2010).
-
Investigations of the friction behaviour and surface modifications for low-friction coatings in traditional and new alternative fuels.
I NordTrib 2010
(2010).
-
Characterization and tribological properties of low-friction tribofilms formed on WS2 coatings in dry sliding: nanoparticle based coatings compared to sputtered coatings.
I ASIATRIB
(2010).
-
Friction behaviour of Fullerene Like WS2 nanoparticles in a Ni-matrix compared to PVD WS2 and MoS2 coatings.
I ICMCTF
(2010).
-
The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium.
I ASIATRIB, December 5-9, 2010, Perth, Western Australia
(2010).
-
Influence from PVD coatings on galling tendency in cold forming.
I Nordtrib 2010, 14th Nordic Symposium on Tribology, Storforsen, Sweden
(2010).
-
Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling.
Surface & Coatings Technology, 204(21-22): 3606-3613 DOI
(2010).
-
Seeding of cross linked alpha-synuclein oligomers in vitro and in vivo.
I 40th Annual Meeting of the Society-for-Neuroscience, November 13-17, 2010, San Diego, USA
(2010).
-
Resistance to abrasive wear – fundamental and practical aspects: Keynote Lecture.
I International Brazilian Conference on Tribology TriboBr-2010
(2010).
-
Tribofilms: On the crucial importance of tribologically induced surface modifications.
I George K. Nikas (red.) Recent Developments in Wear Prevention, Friction and Lubrication, Kerala, India: Research Signpost. 197-225
(2010).
-
Assessment of a nanoparticle bridge platform for molecular electronics measurements.
Nanotechnology, 21(43): 435204- DOI
(2010).
-
Control of junction resistances in molecular electronic devices fabricated by FIB.
I 36th International Conference on Micro and Nano Engineering, MNE2010, Italy (2010)
(2010).
-
Conductivity engineering of graphene by defect formation.
Journal of Physics D, . 43(4): 045404- DOI
(2010).
-
Mechanically strong geopolymers offer new possibilities in treatment of chronic pain.
Journal of Controlled Release, 146(3): 370-377 DOI
(2010).
-
Highly amorphous Fe90Zr10 thin films, and the influence of crystallites on the magnetism.
Thin Solid Films, 519(1): 404-409 DOI
(2010).
-
Impact of Oxygen-Release Material on Human Urine-Derived Stem Cells’ Differentiation and Proliferation in Hypoxic Condition In Vitro.
Student thesis, 2010 Download fulltext -
EMCD – a technique for the analysis of magnetic moments in theTEM.
I EELS Workshop, Zurich, Switzerland, 17-29.10, Proceedings
(2010).
-
Control of Conductivity in Graphene by Formation of Defects.
I Proceedings of Elecmol conference, Grenoble, 2010 .
(2010).
-
Use of a nanoelectrode nanoparticle bridge platform in molecular electronics.
I Proceedings of Elecmol conference, Grenoble, 2010. .
(2010).
-
Use of a nanoelectrode nanoparticle bridge platform in molecular electronics.
I ElecMol’10, 5th International Meeting on Molecular Electronics, Grenoble, France, December 6-10, 2010, 116-116
(2010).
-
Molecular electronics on non-perfect electrode surfaces.
I International Conference on Molecular Electronics, Emmetten, Switzerland
(2010).
-
FIB Fabrication and use of high resistance nanogaps for application in molecular electronics.
I 17th International Microscopy Congress, IMC17, Brazil
(2010).
-
EMCD – a technique for the analysis of magnetic moments in the TEM.
I Proceedings of EELS and EFTEM Meeting 2010, Zurich, ETH. .
(2010).
-
Electrical measurements on graphene in a Au-nanoparticle-bridge platform.
I Proceedings of EELS and EFTEM Meeting 2010, Zurich, ETH. Zurich: EMEZ.
(2010).
-
Mapping of the EMCD signal in real and reciprocal space forquantitative analysis of magnetic samples.
I Scandem 2010 Proceedings; Stockholm, Sweden, 8-11 June 2010
(2010).
-
Mapping of the EMCD signal in real and reciprocal space for quantitative analysis of magnetic samples.
I IMC 17, Rio de Janeiro,19-24 September 2010; Proceedings
(2010).
-
Synthesis, structure and properties of Ni-alloyed TiCx-based thin films.
Journal of Materials Chemistry, 20(28): 5950-5960 DOI
(2010).
-
Structural and magnetic properties of Co68Fe24Zr8/Al2O3 multilayers.
Journal of Crystal Growth, 312(4): 580-586 DOI
(2010).
-
Reciprocal and real space maps for EMCD experiments.
Ultramicroscopy, 110(11): 1380-1389 DOI
(2010).
-
Studies of early growth mechanisms of hydroxyapatite on single crystalline rutile: a model system for bioactive surfaces.
Journal of materials science. Materials in medicine, 21(10): 2743-2749 DOI
(2010).
-
Co-substituted strontium and silicon apatite coatings for metallic implants.
I Seventh SICOT/SIROT Annual International Conference, Gothenburg, Sweden, 2010.
(2010).
-
On Epitaxy of Ultrathin Ni1-xPtx Silicide Films on Si(001).
Electrochemical and solid-state letters, 13(10): H360-H362 DOI
(2010).
-
Interaction of NiSi with dopants for metallic source/drain applications.
Journal of Vacuum Science & Technology B, 28(1): C1I1-C1I11 DOI
(2010).
-
Injectable biodegradable composites for the degenerated intervertebral disc.
I GRIBOI Congress, Turin, 2010
(2010).
-
Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO3 for intervertebral disk augmentation.
Journal of Biomedical Materials Research. Part B - Applied biomaterials, . 95B(1): 75-83 DOI
(2010).
-
Nanocomposite Coatings for Contact Brush Applications.
I G. Stachowiak (red.) Proceedings of the 4th International Tribology Congress, ASIATRIB2010
(2010).
-
Influence on surface micro topography of HSS surfaces from argon ion etch cleaning.
I Nordtrib 2010, 14th Nordic Symposium on Tribology, Storforsen, Sweden
(2010).
-
On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings.
I Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen
(2010).
-
Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement.
I Asiatrib 2010
(2010).
-
Polylactide Foams Reinforced with Wood Fibers or Microfibrillated Cellulose.
Student thesis, 2010 Download fulltext -
Biomechanical, Histological and Ultrastructural Analyses of Laser Micro- and Nano-structured Titanium Alloy Implants: A Study in Rabbit.
Journal of Biomedical Materials Research - Part A, 92A(4): 1476-1486 DOI
(2010).
-
The use of calcium carbonate cements as a drug carrier.
I GRIBOI 2010
(2010).
-
Pre-mixed calcium silicate cement for endodontic applications.
I 23rd Annual conference of the European Society for Biomaterials, Tampere, Finland
(2010).
-
Pre-mixed calcium silicate cement for endodontic applications.
I 23rd European Conference on Biomaterials
(2010).
-
Customised bone cement for vertebroplasty.
I Annual meeting of the Scandinavian Society for Biomaterials, Hafjell, Norway
(2010).
-
Customised Bone Cement for Vertebroplasty.
I Interfacing biology and materials
(2010).
-
Formulering och provning av en ny typ av sågkedjeolja.
Student thesis, 2010 Download fulltext -
Inflammatory Response to Injectable Biomaterials for Stabilisation of Vertebral Compression Fractures.
Trends in Biomaterials & Artificial Organs
(2010).
-
Frequency- and contact load dependency for pneumatic clutch actuators.
I Proceedings of NORDTRIB 2010 : 14th Nordic Symposium on Tribology Luleå: Luleå tekniska universitet.
(2010).
-
Electron microscopy as a tool for basic and applied research.
I 5th meeting of the Italian researchers in Sweden - Stockholm 26th February 2010
(2010).
-
Spatial Mapping of Elemental Distributions in Polypyrrole-Cellulose Nanofibers using Energy-Filtered Transmission Electron Microscopy.
Journal of Physical Chemistry B, 114(43): 13644-13649 DOI
(2010).
-
Tracking Ion Distributions in Polypyrrole Coated Cellulose Nanofibers by means of Energy Filtered Transmission Electron Microscopy.
I 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010
(2010).
-
Tracking Ion Distributions in Polypyrrole Coated Cellulose Nanofibers by means of Energy Filtered Transmission Electron Microscopy.
I Scandem 2010 - Stockholm 8-11 June 2010
(2010).
-
Simulation of magnetic circular dichroism in the electron microscope.
Journal of Physics D, 43(47): 474005- DOI
(2010).
-
Observation of magnetic dichroism in the electron microscope.
I 7th International Conference on Fine Particle Magnetism - Uppsala 21-24 June 2010
(2010).
-
Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool.
I Scandem 2010 - Stockholm 8-11 June 2010
(2010).
-
Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool.
I 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010
(2010).
-
Calculations of orientation-sensitive ELNES on crystalline materials.
I 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010
(2010).
-
Quantitative magnetic measurements with transmission electron microscope.
Journal of Magnetism and Magnetic Materials, 322(9-12): 1478-1480 DOI
(2010).
-
Asymmetry of the two-beam geometry in EMCD experiments.
Journal of Microscopy, 237(3): 465-468 DOI
(2010).
-
Low-temperature synthesis of photoconducting CdTe nanotetrapods.
Journal of Materials Chemistry, 20(6): 1208-1214 DOI
(2010).
-
Structural and electrical characterization of graphene after ion irradiation.
Student thesis, 2010 Download fulltext -
Seeding of cross linked alpha-synuclein oligomers in vitro and in vivo.
I Alzheimer's Association International Conference on Alzheimer's Disease 2010, July 10-15, 2010, Honolulu, USA DOI
(2010).
-
Dental adhesives with bioactive and on-demand bactericidal properties.
Dental Materials, 26(5): 491-499 DOI
(2010).
-
Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films.
Thin Solid Films, . 518(10): 2607-2616 DOI
(2010).
-
Biomimetic ion substituted hydroxyapatite coatings on titanium for orthopedic implants.
I Seventh SICOT/SIROT Annual International Conference
(2010).
-
Bioactive glass scaffold with similar structure and mechanical properties of cancellous bone.
Journal of biomedical materials research. Part B, Applied biomaterials, 95B(2): 449-455 DOI
(2010).
-
Ion substituted calcium phosphate particles.
Pat. PCT/SE2010/050874
(2010).
-
Ion substituted calcium phosphate particles.
Pat. EP2461840A4
(2010).
-
Biomimetic hydroxyapatite growth on titanium oxide surfaces.
I YSF 2010
(2010).
-
Biomineralized strontium-substituted apatite/titanium dioxide coating on titanium surfaces.
Acta Biomaterialia, 6(4): 1591-1600 DOI
(2010).
-
Biomimetic fluoride hydroxyapatite coating on dental implants.
I Scandinavian Society for Biomaterials (ScSB) annual meeting 2010 – Interfacing biology and materials
(2010).
-
Changes of Surface Composition and Morphology after Incorporation of Ions into Biomimetic Apatite Coating.
Journal of Biomaterials and Nanobiotechnology, 1(1): 7-16 DOI
(2010).
-
Biomimetic calcium phosphate coatings on recombinant spider silk fibres.
Biomedical Materials, 5(4): 045002- DOI
(2010).
-
Premixed acidic calcium phosphate cement: characterization of strength and microstructure.
Journal of biomedical materials research. Part B, Applied biomaterials, 93B(2): 436-441 DOI
(2010).
-
In vitro and in vivo evaluation of an injectable premixed calcium phosphate cement: cell viability and immunological response from rat.
International Journal of Nano and Biomaterials DOI
(2010).
-
Evaluation of a radio-opaque premixed calcium phosphate cement.
I Scandinavian Society or Biomaterials Annual Meeting
(2010).
-
Setting time and initial compressive strength of a radiopaque premixed calcium phosphate cement.
I GRIBOI, Turin, 2010
(2010).
-
Conductive nanocomposite ceramics as tribological and electrical contact materials.
European Physical Journal, 49(2): 22902- DOI
(2010).
-
Potential of a new low-friction coating based on inorganic fullerens: comparison with state-of-the-art PVD coatings.
I World Tribology Congress 2009, 400-
(2009).
-
Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles.
I Wear of Materials
(2009).
-
Effects of lipid peroxidation metabolites on alpha-synuclein aggregation.
I 39th Annual Meeting of the Society-for-Neuroscience, October 17-21, 2009, Chicago, USA
(2009).
-
Dielectrophoretic trapping of gold nanoparticles on SAM-prepared nanogaps: A comparative study of different molecular systems.
I presentation European Conference on Molecular Electronics (ECME2009), Copenhagen, Denmark (Sept 2009)
(2009).
-
Electrophoretic trapping of gold nanoparticles on sam-prepared nanogaps: A comparative study of different molecular systems.
I ECME2009, 10th European Conference on Molecular Electronics
(2009).
-
Fabrication and characterization of high resistance nanogaps used for studies of different molecular electronics systems.
I Scandem 2009 Annual Meeting of the Nordic Microscopy Society. Reykjavik, Iceland, June 8-10, 2009
(2009).
-
Fabrication and use of high resistance nanogaps for application in molecular electronics.
I Conference on Micro and Nano Engineering (MNE2009), Ghent, Belgium, Sept. 28 - Oct. 1, 2009.
(2009).
-
Multifunctional implant coatings providing possibilities for fast antibiotics loading with subsequent slow release.
Journal of materials science. Materials in medicine, 20(9): 1859-1867 DOI
(2009).
-
A novel graded bioactive high adhesion implant coating.
Applied Surface Science, 255(17): 7723-7728 DOI
(2009).
-
Properties affecting machinability of hot work tool steels.
I P. Beiss, Christoph Broeckmann (red.) Tool Steels - Deciding Factor in Worldwide Production .
(2009).
-
DIY graphene production, transfer and characterization.
I First Nordic Workshop on graphene science in 20-21 April, 2009, Uppsala.
(2009).
-
The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films.
Thin Solid Films, . 518(1): 71-76 DOI
(2009).
-
Ultrastructural characterization of tooth-biomaterial interfaces prepared with broad and focused ion beams.
Dental Materials, 25(11): 1325-1337 DOI
(2009).
-
Sputtering of highly adhesive Mo back contact layers for Cu(In,Ga)Se2 solar cells.
I Proceedings of the 24th European Photovoltaic Solar Energy Conference, München: WIP-Renewable Energies. 3037-
(2009).
-
Applications of active materials.
Diss. Download fulltext
(2009).
-
Development of Calcium Sulphate Scaffolds Loaded with Acidic Fibroblast Growth Factor for Spinal Cord Repair.
I European Society for Biomaterials Conference 2009
(2009).
-
Fast loading, slow release: a new strategy for incorporating antibiotics.
Key Engineering Materials, 396-398: 523-526 DOI
(2009).
-
A low-absorption x-ray energy filter for small-scale applications.
Optics Express, 17(14): 11388-11398
(2009).
-
Using a molten organic conducting material to infiltrate a nanoporous semiconductor film and its use in solid-state dye-sensitized solar cells.
Synthetic metals, 159(1-2): 166-170 DOI
(2009).
-
On the wear of PVD-coated HSS hobs in dry gear cutting.
Wear, 266(3-4): 444-452 DOI
(2009).
-
Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test.
Wear, . 267(12): 2257-2268 DOI
(2009).
-
Wear of an AlCrN coated HSS Hob in Dry Gear Cutting.
I HSS FORUM - Smart Solutions for the Future of Metal Cutting
(2009).
-
Bone Regeneration in Hydroxyapatite Scaffolds: An in-vivo study in humans.
I 22nd European Society for Biomaterials, Lausanne, Switzerland; 7-11th of September 2009
(2009).
-
Fully Depleted UTB and Trigate N-Channel MOSFETs Featuring Low-Temperature PtSi Schottky-Barrier Contacts With Dopant Segregation.
IEEE Electron Device Letters, 30(5): 541-543 DOI
(2009).
-
Influence from tool roughness on the risk of work material adhesion and transfer.
Materials and Manufacturing Processes, 24(7-8): 913-917 DOI
(2009).
-
Spin and orbital moment in amorphous Co68Fe24Zr8 layers.
Physical Review B. Condensed Matter and Materials Physics, 80(13): 134402- DOI
(2009).
-
Ar ion induced desorption yields at the energies 5-17.7 MeV/u.
Nuclear Instruments and Methods in Physics Research Section A, 599(1): 1-8 DOI
(2009).
-
Influence of aluminium pre-treatment on galling in cold forming.
I World Tribology Congress, September 6-11, 2009, Kyoto, Japan
(2009).
-
Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling.
I Ecotrib 2009, 87-92
(2009).
-
Laboratory test simulation of galling in cold forming of aluminium.
Wear, 267(12): 2278-2286 DOI
(2009).
-
Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour.
Wear, 267(12): 2142-2156 DOI
(2009).
-
Evaluation of Wear Properties of DLC Films by a Micro Slurry-Jet Erosion (MSE) Test.
I WOM 2009 in Las Vegas 19-23/4 2009
(2009).
-
Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings.
Wear, 267(1-4): 264-269 DOI
(2009).
-
Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings.
Lubrication Science, 21(6): 213-226 DOI
(2009).
-
On the Vital Importance of Dynamics and Modifications in tribological Surfaces-Illustrating Examples from Practical Applications.
I Sixth International Conference on Flow Dynamics, Sendai, Japan 2009
(2009).
-
Surface modifications in tribological contacts.
Wear, 266(3-4): 370-378 DOI
(2009).
-
Using a nano-contact platform for evaluating molecular electronics response.
I Nanotech europe, Berlin, September 2009. NTE09-9214997
(2009).
-
Electrical characterization of defect induced graphene nanosheets.
I Nanotech Europe 2009 - 28-30 september Berlin
(2009).
-
The effect of induced vacancy defects on resistivity of graphene.
I Scandem conference, Reykjavik 2009
(2009).
-
On-chip fluorescence activated cell sorting by an integrated miniaturized ultrasonic transducer.
Analytical Chemistry, 81(13): 5188-5196 DOI
(2009).
-
Energy Scaling of the Ion-Induced Desorption Yield for Perpendicular Collisions of Ar and U with Stainless Steel in the Energy Range between 5 and 100 MeV/u.
Journal of Vacuum Science & Technology. A. Vacuum, Surfaces, and Films, 27(2): 245-247 DOI
(2009).
-
Probing the electronic nanocosmos in the electron microscope: Measurements in semiconductor quantum structures and magnetic materials.
I Psi-K workshop, TU-Vienna, 16-18th April 2009
(2009).
-
Ny metod kartlägger magnetism.
Fysik-aktuellt, 2: 6-
(2009).
-
Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications.
Plasma Processes and Polymers, . 6(S1): S928-S934 DOI
(2009).
-
Transmission Electron Microscopy for Characterization of Structures, Interfaces and Magnetic Moments in Magnetic Thin Films and Multilayers.
Diss. Download fulltext
(2009).
-
Quantitative EMCD yields nano-information on magnetic moments.
I EDGE 2009: International EELS-Workshop, May 17 – May 22, 2009, Banff, Alberta, Canada
(2009).
-
Quantitative magnetic information from reciprocal space maps in transmission electron microscopy.
Physical Review Letters, 102(3): 037201- DOI
(2009).
-
Co-mineralization of fluoride substitued hydroxyapatite/TiO2 coating on Ti implants through a biomineralization process.
I Scandinavian Society for Biomaterials (ScSB) annual meeting 2009, Copenhagen, Denmark
(2009).
-
Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces.
Journal of materials science. Materials in medicine, 20(7): 1401-1408 DOI
(2009).
-
Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings.
Wear, 266(3-4): 379-387 DOI
(2009).
-
Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy.
Wear, 266(9-10): 988-994 DOI
(2009).
-
Assessing Surface Area Evolution during Biomimetic Growth of Hydroxyapatite Coatings.
Langmuir, 25(3): 1292-1295 DOI
(2009).
-
Deposition of TiN-WS2-Nanocomposite Coatings by a Hybrid Process: Reactive Sputtering and Clusters Gun.
Plasma processes and polymers, 6: S923-S927 DOI
(2009).
-
The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating.
Surface and Coatings Technology, 203(20-21): 2989-2994 DOI
(2009).
-
The Role of Surface Treatment in the Tribofilm Formation on Alumina Friction Drive Components.
I World tribology congress 2009, Kyoto
(2009).
-
The effect of grain size on the tribofilm formation on the alumina friction drive system of an ultrasonic motor.
I E. Ciulli, B. Piccigallo, R. Bassani, F. Franek, J. Vizintin, R. Crockett (red.) ECOTRIB 09, Pisa: Edizioni ETS. 965-970
(2009).
-
Influence from humidity on the alumina friction drive system of an ultrasonic motor.
Tribology International, . 42(10): 1467-1477 DOI
(2009).
-
On the role of tribofilm formation on the alumina drive components of an ultrasonic motor.
I Wear of Materials .
(2009).
-
On the role of tribofilm formation on the alumina drive components of an ultrasonic motor.
Wear, . 267(5-8): 1295-1300 DOI
(2009).
-
A current update of the FIB/TEM method used in implant research.
I 2nd China-Europe Symposium on Biomaterials in Regenerative Medicine, Barcelona, Spain; 16-20th of November 2009
(2009).
-
Calcium Aluminate Coated and Uncoated Free Form Fabricated CoCr Implants: A Comparative Study in Rabbit.
Journal of Biomedical Materials Research - Part B Applied Biomaterials, 91B(1): 122-127 DOI
(2009).
-
P.Biomechanical, Histological and ultrastructural Analysis of Micro-and Nano-structured Titanium alloy Implants.
I 55th Annual Meeting of the Orthopaedic Research Society. Las Vegas, USA; 22-25th February, 2009
(2009).
-
Morphological studies on machined implants of commercially pure titanium and titanium alloy (Ti6A14V)..
I 55th Annual Meeting of the Orthopaedic Research Society. Las Vegas, USA; 22-25th of February, 2009
(2009).
-
Morphological studies on machined implants of commercially pure titanium and titanium alloy (Ti6Al4V) in the rabbit.
Journal of biomedical materials research. Part B, 91B(1): 309-319 DOI
(2009).
-
Micro- and nanostructured magnetic field sensor for space applications.
I 15th International Conference on Solid-State SensorsTransducers 2009, 1190-1193 DOI
(2009).
-
Immobilization of bone morphogenetic protein 2 on bioactive titanium/hydroxyapatite surfaces for multifaceted osteogenetic effect.
I 6th International Key Symposium in Nanomedicine, 9-11 September, 2009, Stockholm, Sweden.
(2009).
-
In vitro characterization of bioactive titanium dioxide/hydroxyapatite surfaces functionalized with BMP-2.
Journal of biomedical materials research. Part B, Applied biomaterials, 91B(2): 780-787 DOI
(2009).
-
Imprinting layer specific magnetic anisotropies in amorphous multilayers.
Journal of Applied Physics, . 106(2): 023918- DOI
(2009).
-
Wear tests of pneumatic cylinders of aluminium from permanent mould casting and extrusion.
I Proceedings of the 2nd European Conference on Tribology (ECOTRIB 2009) Pisa, Italien: Italian Tribology Association.
(2009).
-
Wear study of field worn clutch actuators and evaluation of a model test.
Wear, . 267(12): 2269-2272 DOI
(2009).
-
EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool.
I EDGE 2009 - International EELS Workshop, Banff, Canada 17-22 May 2009
(2009).
-
In-situ contacting of nanosheets and remote EMCD.
I 2nd International Workshop on Remote Electron Microscopy and In Situ Studies, Gothenburg, Sweden 16-18 November 2009
(2009).
-
On precision of ELNES calculations for EMCD applications.
I MC 2009 - Microscopy Conference 2009 in Graz, Austria 30/8-4/9 2009
(2009).
-
Crystalline surgical implant composite materials and kits and methods of manufacture.
Pat. PCT/IB2009/050483 (2009-02-05)
(2009).
-
Antipathogenic biomedical implants, methods and kits employing photocatalytically active material.
Pat. PCT/2009/050715
(2009).
-
The effect of Zn1-xMgxO buffer layer deposition temperature on Cu(In,Ga)Se2 solar cells: A study of the buffer/absorber interface.
Progress in Photovoltaics, 17(2): 115-125 DOI
(2009).
-
Mild sonochemical exfoliation of bromine-intercalated graphite a new route towards graphene.
Journal of Physics D, . 42(11): 112003- DOI
(2009).
-
Fabrication of graphene by sonochemical exfoliation of bromine-graphite.
I UUCC 2009 - Uppsala University Chemistry Conference - Uppsala Sweden, 12 March 2009
(2009).
-
Sonochemical exfoliation of bromine-graphite.
I E-MRS 2009 Spring meeting - Strasbourg - France 8-12 June 2009
(2009).
-
Fabrication of graphene by bromine-intercalation and sonochemical exfoliation.
I Graphene Week, 2-7 March 2009, Obergurgl, Austria
(2009).
-
Ion substituted hydroxyapatite coatings.
Pat. P9159PC
(2009).
-
Co-mineralization of strontium substituted hydroxyapatite on polycrystalline rutile surface through a biomineralization process.
I 22nd European Conference on Biomaterials, Lausanne, Switzerland, 2009
(2009).
-
Biomimetic ion substituted apatite coating on titanium implants: surface composition and morphology control.
I 2nd China-Europe Symposium on Biomaterials in Regenerative Medicine, Barcelona, Spain, 2009.
(2009).
-
Surface coating for biomedical application.
Pat. se 0901292-3
(2009).
-
The Functionalization of Graphene.
Download fulltext
(2009).
-
Premixed acidic calcium phosphate cement: evaluation of strength and setting.
I European Society for Biomaterials Conference
(2009).
-
Targeted Local Delivery of Bisphosphonate From Orthopaedic Implants.
I Prado M, Zavaglia C (red.) BIOCERAMICS 21, 543-546 DOI
(2009).
-
Bisphosphonate incorporation in surgical implant coatings by fast loading and co-precipitation at low drug concentrations.
Journal of materials science. Materials in medicine, 20(10): 2053-2061 DOI
(2009).
-
Optical sensor unit for evanescence wave spectroscopy.
Pat. us 9,709,504 B2 (2017-07-18)
(2009).
-
Optical sensor unit for evanescence wave spectroscopy.
Pat. European patent 2 271 914 B1 (2013-03-13)
(2009).
-
Brittle-to-Ductile Transition in Uniaxial Compression of Silicon Pillars at Room Temperature.
Advanced Functional Materials, 19(15): 2439-2444 DOI
(2009).
-
Comparisons between commercial low-friction coatings and emerging coating concepts in ball-on-disc tests – coefficient of friction, tribofilm formation and surface damage.
I NordTrib
(2008).
-
Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts.
I Nordtrib, Tampere Finland
(2008).
-
A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons.
Wear, 264(11-12): 1129-1141 DOI
(2008).
-
Targeting micro-sectioning: A technique to study subsurface features in worn specimens.
Wear, 264(11-12): 1152-1156 DOI
(2008).
-
Rock penetration into cemented carbide drill buttons during rock drilling.
Wear, 264(11-12): 1142-1151 DOI
(2008).
-
Fabrication and characterization of highly reproducible, high resistance nanogaps made by focused ion beam milling.
I European Microscopy Congress 2008 September
(2008).
-
Strength and Chemical Stability due to Aging of Two Bone Void Filler Materials.
Key Engineering Materials, 361-363: 315-318
(2008).
-
Bioactive coatings on metal implants combined with drug delivery features.
I 8th World Biomaterials Congress 28 May-1 June 2008, Amsterdam, The Netherlands, Materials Interactions, P 1669-
(2008).
-
On the relation between composition, oxidation and machinability of tool steels.
I The 13th Nordic Symposium on Tribology, Tampere, Finland, June 10-13, 2008
(2008).
-
Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides.
Wear, 265(3-4): 490-496 DOI
(2008).
-
The Atomic Layer Deposition of HfO2 and ZrO2 using Advanced Metallocene Precursors and H2O as the Oxygen Source.
Chemical Vapor Deposition, 14(11-12): 358-365 DOI
(2008).
-
Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy.
Tribology letters, 32(1): 31-34 DOI
(2008).
-
Selection of post-growth treatment parameters for atomic layer deposition of structurally disordered TiO2 thin films.
Journal of Non-Crystalline Solids, 354(2-9): 404-408 DOI
(2008).
-
Injectable Non-resorbable Ceramics for Stabilisation of Vertebral Compression Fractures.
Trends in Biomaterials & Artificial Organs, 21(2): 98-106
(2008).
-
Chemical stability of a novel bioceramic for stabilisation of vertebral compression fractures.
Trends in Biomaterials and Artificial Organs, 21(2): 98-106
(2008).
-
Fast loading, slow release a new strategy for incorporating antibiotics to hydroxyapatite.
I Bioceramics 21
(2008).
-
Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test.
I Proceedings of the International conference Nordtrib 2008
(2008).
-
Designed high-friction surfaces: influence of roughness and deformation of the counter surface.
Wear, 264(9-10): 807-814 DOI
(2008).
-
On adhesion of work material in metal forming.
International journal of microstructure and materials properties, 3(2-3): 401-412 DOI
(2008).
-
Influence from tool roughness on the risk of work material adhesion and transfer.
I ICHT&SEDT 2008
(2008).
-
On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel.
Wear, 264(9-10): 781-787 DOI
(2008).
-
Lab test simulation of galling in cold forming of aluminium.
I NordTrib 2008
(2008).
-
In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates.
I Daculsi G, Layrolle P (red.) BIOCERAMICS, VOL 20, PTS 1 AND 2, 689-692 DOI
(2008).
-
Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films.
Trends in Biomaterials & Artificial Organs, 22(2): 104-110
(2008).
-
Comparative study of the behaviour of a novel injectable bioceramic in sheep vertebrae.
Trends in Biomaterials & Artificial Organs, 22(3): 138-143
(2008).
-
Flexural Strength Measurement of Ceramic Dental Restorative Materials.
I Daculsi G, Layrolle P (red.) BIOCERAMICS, VOL 20, PTS 1 AND 2, 873-876
(2008).
-
On the mechanisms of friction between skis and snow and implications on how to prepare the skis for optimum glide.
I NordTrib
(2008).
-
Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour.
I Proceedings of the International conference Nordtrib 2008:
(2008).
-
Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory.
Journal of Applied Physics, 103(8): 083505- DOI
(2008).
-
Phase formation of CaAl2O4 from CaCO3-Al2O3 powder mixtures.
Journal of the European Ceramic Society, 28(4): 747-756 DOI
(2008).
-
Att skriva tekniska och vetenskapliga rapporter – Korta tips, regler och exempel för effektiv kommunikation i skrift.
Report
(2008).
-
Avoiding slip accidents – about the friction in walking on hard floorings.
I NordTrib
(2008).
-
Control of Conductivity in Graphene by Formation of Defects.
I AVS 55th International Symposium & Exhibition 2008, October 19-24, Boston, USA
(2008).
-
Conductivity engineering of graphene and carbon nanosheets by defect formation.
I Conference of the American Vacuum Society, Boston, 2008
(2008).
-
Injectable bone cements for Vertebroplasty studied in sheep vertebrae with electron microscopy.
Key Engineering Materials, 361-363: 373-376
(2008).
-
Characterization of the surface properties of commercially available dental implants using scanning electron microscopy, focused ion beam, and high-resolution transmission electron microscopy.
Clinical Implant Dentistry and Related Research, 10(1): 11-22 DOI
(2008).
-
Technique for preparation and characterization in cross-section of oral titanium implant surfaces using focused ion beam and transmission electron microscopy.
Journal of Biomedical Materials Research, Part A, 87A(4): 1003-1009 DOI
(2008).
-
Damage formation in TiO2 by heavy ions: consequences for micro- and nano-struring.
I 7th International Symposium on Swift Heavy Ions in Matter (SHIM2008) .
(2008).
-
Ingenjörsutbildningar vid Uppsala universitet. Studenter granskar några utbildningar ur genusperspektiv.
Report Download fulltext
(2008).
-
Optical, thermal and structural characteristics of carbon nanoparticles embedded in ZnO and NiO as selective solar absorbers.
Solar Energy Materials and Solar Cells, 92(10): 1285-1292 DOI
(2008).
-
Probing nano-electronic and magnetic materials in the electron microscope electronic.
I 1st International Conference from Nanoparticles and Nanomaterials to Nanodevices and Nanosystems (IC4N), Halkidiki, Greece, June 2008 (invited)
(2008).
-
Control of Conductivity in Graphene by Formation of Defects.
I AVS 55th International Symposium & Exhibition 2008 Program, 59-59
(2008).
-
EMCD in the TEM - Optimization of signal acquisition and data evaluation.
I M & M conference, Albuquerque, USA
(2008).
-
Experimental conditions and data evaluation forquantitative EMCD measurements in the TEM.
I European Microscopy Conference
(2008).
-
Electron magnetic circular dichroism -Optimization of signal acquisition and data evaluation.
I European Microscopy Conference, Aachen, 2008
(2008).
-
Conductivity engineering of graphene and carbon nanosheets by defect formation.
I Conference of the American Vacuum Society, Boston, 2008
(2008).
-
Hydroxylapatite growth on single-crystal rutile substrates.
Biomaterials, 29(23): 3317-3323 DOI
(2008).
-
In vitro biomechanical testing of two injectable materials for vertebroplasty in different synthetic bone.
Key Engineering Materials, 361-363: 369-372
(2008).
-
A comparative study of the bioactivnity of three materials for dental applications.
Dental Materials, 24(5): 653-659 DOI
(2008).
-
Influences from humidity on the friction drive system of a piezoelectric motor.
I NordTrib
(2008).
-
Forearm bone-anchored amputation prosthesis: a case study on the osseointegration.
Acta Orthopaedica, 79(1): 78-85 DOI
(2008).
-
Conduction Properties of Layer-by-Layer Self-Assembled Multilayer Nanoparticulate Structures.
Journal of Nanoelectronics and Optoelectronics, 3(2): 184-189 DOI
(2008).
-
Structural coherence and layer perfection in Fe/MgO multilayers.
Journal of Physics, 20(5): 055212- DOI
(2008).
-
On the wear of pneumatic clutch actuators.
I Jaakko Kleemola, Arto Lehtovaara (red.) Proceedings of NORDTRIB 2008 : 13th Nordic Symposium on Tribology Tammerfors, Finland: Tampere University of Technology.
(2008).
-
Energy-loss magnetic chiral dichroism (EMCD): Magnetic chiral dichroism in the electron microscope.
Journal of Materials Research, 23(10): 2582-2590 DOI
(2008).
-
Detection of magnetic circular dichroism on the two-nanometer scale.
Physical Review B. Condensed Matter and Materials Physics, 78(10): 104413- DOI
(2008).
-
A novel method for producing electron transparent thin films of inat interfaces between cells and biomaterials.
Journal of materials science. Materials in medicine, 19(1): 467-470 DOI
(2008).
-
Intercalation and Ultrasonic Treatment of Graphite: a New Synthetic Route to Graphene.
I AVS 55th International Symposium & Exibition, Boston, USA 19-24 oktober 2008
(2008).
-
Targeted local delivery of bisphophonate from orthopedic implants.
I Bioceramics 21
(2008).
-
Conductive nanocomposite ceramics as tribological and electrical contact materials.
I International Conference on Electrical Contacts, ICEC 2008
(2008).
-
Structure of Fe-Co/Pt(001) superlattices: a realization of tetragonal Fe-Co alloys.
Journal of Physics, 19(1): 016008- DOI
(2007).
-
Tribology of nanocomposite materials in electrical contacts.
I ECOTRIB 2007
(2007).
-
Electronic and structural studies of immobilized thiol-derivatized cobalt porphyrins on gold surfaces.
Applied Surface Science, 253(18): 7540-7548 DOI
(2007).
-
Synthesis of highly textured thin piezoelectric AlN films with a tilted c-axis.
I 17th International Vacuum Conference (IVC-17), 13th International Conference on Surface science (ICSS-13), International Conference on Nanoscience and Technology 2007 (ICN+T 2007) Stockholm, Sweden, 2-6 June
(2007).
-
Nanocontact Fabrication and Characterization.
I The 3rd European FIB & DualBeam UserClub Meeting, April 16th – 18th, 2007, Eindhoven, the Netherlands
(2007).
-
Fabrication and characterization of highly reproducible, high resistance nanogaps made by focused ion beam milling.
Nanotechnology, 18(28): 285301- DOI
(2007).
-
Fabrication and characterization of highly reproducible, high resistance nanogaps made by focused ion beam milling.
I 17th International Vacuum Congress, IVC17
(2007).
-
Structural and tribological properties of cluster-assembled CNx films.
Applied Physics A, 87(4): 767-772 DOI
(2007).
-
Magnetic and transport properties of Ni81Fe19/Al2O3 granular multilayers approaching the superparamagnetic limit.
Journal of Applied Physics, 101(7): 073907- DOI
(2007).
-
A low valent metalorganic precursor for the growth of tungsten nitride thin films by atomic layer deposition.
Journal of Materials Chemistry, 17(11): 1109-1116 DOI
(2007).
-
Electrical properties of atomic-layer-deposited thin gadolinium oxide high-k gate dielectrics.
Journal of the Electrochemical Society, 154(10): G207-G214 DOI
(2007).
-
Bioactive Coatings Combined with Drug Delivery Features.
I BIO-Ångström 2007, Tomorrow’s Life Science Solutions: How Can We Contribute?, 6-
(2007).
-
Flexural strength measurement of ceramic dental restorative materials.
Journal of Advanced Materials, 39(1): 41-45
(2007).
-
Structural change of biomimetic hydroxyapatite coatings due to heat treatment.
Journal of Applied Biomaterials & Biomechanics, 5(1): 23-27
(2007).
-
Formation and adhesion of biomimetic hydroxyapatite deposited on titanium substrates.
Acta Biomaterialia, 3(6): 980-984 DOI
(2007).
-
Wear propagation of PVD AlCrN coated HSS hob in dry gear hobbing.
I Proceedings of the European Conference on Tribology, Slovenia (Ljublana)
(2007).
-
The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel.
Wear, 264(9-10): 885-892 DOI
(2007).
-
Comparison between two test methods for avaluation of forming tool materials.
I Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007
(2007).
-
Comparison of two test methods for evaluation of forming tool materials.
Tribotest, 14(3): 147-158 DOI
(2007).
-
Fracture strength and Young’s modulus of ZnO nanowires.
Nanotechnology, 18(20): 205503- DOI
(2007).
-
On adhesion in tribological contacts-Causes and consequences.
Tribologia, 26(1): 3-16
(2007).
-
Predicting hardness of covalent/ionic solid solution from first-principles theory.
Applied Physics Letters, 91(12): 121918- DOI
(2007).
-
Surface modifications in tribological contacts.
I Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, 599-612
(2007).
-
Nanostructuring by heavy ion beam-based lithography.
I The 18th symposium of the Material Research Society of Japan, 7-9 December 2007, Tokyo
(2007).
-
Strongly reduced exciton transfer between parallel quantum wires.
Applied Physics Letters, 90(10): 101108-101108-3 DOI
(2007).
-
Quantitative transmission electron microscopy for the analysis of interfaces and quantum nano-structures.
I European Workshop of Metal Organic Chemical Vapor Deposition, Bratislava, Slovak Republic, 3rd-7th june 2007
(2007).
-
Quantitative description of electronic states magnetic nanostructures using a transmission electron microscope (TEM).
I Frontiers in Theoretical Magnetism II (workshop), Uppsala, 11th-12th October 2007
(2007).
-
Nanostructures under the knife.
I Honorary Symposium: Philippe Buffat, Lausanne, Switzerland, 27th April 2007
(2007).
-
Quantitative electron microscopy on tooling materials to semiconductor quantum structures.
I Winterschool of LABORATOIRE DE PHYSIQUE DES NANOSTRUCTURES, Zinal Switzerland, 12-14 March 2007
(2007).
-
Quantitative electron microscopy.
I European MRS, Warsaw
(2007).
-
Narrow (= 4 meV) inhomogeneous broadening and its correlation with confinement potential of pyramidal quantum dot arrays.
Applied Physics Letters, 91(8): 081106-081106-3 DOI
(2007).
-
Exploitation of atomic layer deposition for nanostructured materials.
Materials science & engineering. C, biomimetic materials, sensors and systems, 27(5-8): 1504-1508 DOI
(2007).
-
Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element.
I E-MRS, spring 2007, Strasbourg, Muntlig presentation
(2007).
-
Morphology of amorphous Fe91Zr9/Al2O3 multilayers: Dewetting and crystallization.
Physical Review B. Condensed Matter and Materials Physics, 75(21): 214202-1-214202-6 DOI
(2007).
-
Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings.
I Proceedings of the European Conference on Tribology, Slovenia (Ljublana)
(2007).
-
Homogeneous amplified single-molecule detection: Characterization of key parameters.
Analytical Biochemistry, 368(2): 230-238 DOI
(2007).
-
Plastic deformation of gallium arsenide micropillars under uniaxial compression at room temperature.
Applied Physics Letters, 90(4): 043123- DOI
(2007).
-
Analysis of the tribofilm formation on the friction drive surfaces of a piezoelectric motor.
I ASME/STLE International Joint Tribology Conference, Parts A and B, 871-872
(2007).
-
Mechanisms of quantum dot energy engineering by metalorganic vapor phase epitaxy on patterned nonplanar substrates.
Nano letters (Print), 7(5): 1282-1285 DOI
(2007).
-
Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors.
Tribology International, 40(2): 355-359 DOI
(2007).
-
Textured surfaces in sliding boundary lubricated surfaces – mechanisms, possibilities and limitations.
Tribology - Materials, Surfaces & Interfaces, 1(4): 181-189
(2007).
-
Tribological surfaces of a pneumatic clutch actuator.
I Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, 955-967
(2007).
-
Theoretical evidence of the compositional threshold behavior of FeCr surfaces.
Physical Review B. Condensed Matter and Materials Physics, 76(22): 220401-1-220401-4 DOI
(2007).
-
Carbon nanopillar array deposition on SiO2 by ion irradiation through a porous alumina template.
Vacuum, 82(3): 359-362 DOI
(2007).
-
100 nm resolution Fresnel Zone Plate made by focused ion beam lithography.
I 17th International Vacuum Congress, IVC17
(2007).
-
Focused ion beam fabrication procedures of x-ray micro Fresnel zone plates.
Journal of Micromechanics and Microengineering, 17(3): 617-622 DOI
(2007).
-
A simplified method for capillary embedment into microfluidic devices exemplified by sol-gel based preconcentration.
Electrophoresis, 28(24): 4758-4764 DOI
(2007).
-
Bioactivated PDMS microchannel evaluated as sensor for human CD4+ cells: The concept of a point-of-care method for HIV monitoring.
Sensors and actuators. B, Chemical, 123(2): 847-855 DOI
(2007).
-
Instant oxidation of closed microchannels.
Journal of Micromechanics and Microengineering, 17(4): N16-N21 DOI
(2007).
-
EELS studies of carbide derived carbons.
Carbon, 45(10): 2047-2053 DOI
(2007).
-
Design of Nanocomposite Low-Friction Coatings.
Advanced Functional Materials, 17(10): 1611-1616 DOI
(2007).
-
HiMeC - A Swedish Programme for research and Doctoral Studies.
I Nordtrib 2006, Hesingör Danmark
(2006).
-
Wear induced material modification of cemented carbide rock drills.
Int. Journal of Refractory Metals and Hard Materials, 24(1-2): 168-176
(2006).
-
Machinability of modern hot work tool steels.
I Proceedings of the 7th Int. Tooling Conference, Torino, Italy, 2006
(2006).
-
FIB - verktyg för verktygsanalys.
I konferens
(2006).
-
Mechanisms of Work Material Adhesion in Tooling Operations Revealed by TEM.
I The 16th International Microscopy Congress
(2006).
-
In vitro bioactivity of injectable ceramic orthopaedic cements.
Key Engineering Materials, 309-311: 833-836
(2006).
-
Domain configuration of permalloy ellipses in a rotating magnetic field.
J. Phys. D: Appl. Phys., 610-614
(2006).
-
Perpendicular magnetic recording media by electrochemical techniques.
I konferens
(2006).
-
Precursor-dependent structural and electrical characteristics of atomic layer deposited films: Case study on titanium oxide.
Materials Science in Semiconductor Processing, 9(6): 1084-1089 DOI
(2006).
-
Quantitative electron microscopy.
I Proceedings of conference on density functional theory and TEM, Wien, March 2006
(2006).
-
Structural transitions in multilayered thin films and their impact on the magnetic properties.
I konferens, 1-
(2006).
-
Uppsala Berzelii Technology Center: Swedish Center to Target Neurodegenerative Diseases.
(2006).
-
Polarization-resolved optical absorption in single V-groove quantum wires.
Applied Physics Letters, 89(19): 191111- DOI
(2006).
-
Combiantion of DLC coatings and EP additivesfor improveds tribological behaviour of boundary lubricated surfaces.
Wear, 261: 32-
(2006).
-
Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces.
Wear, 261(1): 32-40
(2006).
-
Improvement in galling performance through surface engineering.
Surface Engineering, 22(4): 235-238 DOI
(2006).
-
Influence of long-range substrate roughness on disorder in V-groove quantum wire structures.
Journal of Applied Physics, 100(12): 123509- DOI
(2006).
-
Ion track nanolithography.
I 50th IUVSTA Workshop: toward Novel Nanostructure Based Devices, Dubrovnik, Kroatien
(2006).
-
Micromanufacturing by Focus Ion Beam.
I konferens
(2006).
-
A hybrid poly(dimethylsiloxane) microsystem for on-chip whole blood filtration optimized for steroid screening.
Biomedical Microdevices, 8(1): 73-79
(2006).
-
Electrical contacting of individual electrodeposited Au Nanowire by Focused Ion Beam techniques.
Nanotechnology, 1134-1139
(2006).
-
Nanoscale Electrical Transport Measurements by Focused Ion Beam.
I Scandem
(2006).
-
Evaporated vanadium nitride as a friction material in dry sliding against stainless steel.
Wear, . 261(1): 2-8 DOI
(2006).
-
Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components.
Advances in Science and Technology, . 45: 122-131 DOI
(2006).
-
Electrothermal feasibility of carbon microcoil heaters for cold/hot gas microthrusters.
Journal of Micromechanics and Microengineering, 16: 1154-1161 DOI
(2006).
-
Optimization of an industrial DC magnetron sputtering process for graded composition solar thermal absorbing layer.
Solar Energy Materials & Solar Cells, 243-261
(2006).
-
Alloy segregation, quantum confinement, and carrier capture in self-ordered pyramidal quantum wires.
Nano Letters, 6(5): 1036-1041 DOI
(2006).
-
Vibration-induced deterioration of tin-coated conncetors studied by using a force controlled fretting bench-test.
I Proc. 51st IEEE Holm Conf. on Electrical Contacts, 97-106
(2005).
-
Electrical characterization of Nanowires contacted using a FIB.
I microscopy of Semiconducting materials conference
(2005).
-
Fabrication of electrical nanocontacts to nanometer-sized materials and structures using a Focused Ion Beam.
Materials Research Society.Proc, j.5.2(2)
(2005).
-
Nanocontacts fabricated by Focused Ion Beam (FIB): characterisation and application to nanometre-sized materials,.
I Microscopy of Semiconducting Materials - MSMXIV (Oxford, U.K., April 11-14, 2005).
(2005).
-
Electrical characterisation of nanowires and nanoparticles contacted using a FIB.
I Conferencia de Dispositivos Electrónicos 2005 (Tarragona, Spain, Febr. 2-4, 2005).
(2005).
-
Extraordinary Optical Transmittance through SIC – Ion Beam Processing for Surface Plasmonics.
I Materials Research Society Fall Meeting, GG2.6-
(2005).
-
Electronic and geometric structure of (Zn,Co)O room temperature Ferromagnets.
I 50th MMM Meeting Program
(2005).
-
Carrier Tunneling between Parallel GaAs/AlGaAs V-groove Quantum Wires.
I AIP Conference Proceedings 772
(2005).
-
Low Cost Selective Solar Absorber Coatings: Characteristics of Carbon-In-Silica Synthesized with Sol-Gel Technique.
Journal of Sol-Gel Science and Technology, 36: 33-43 DOI
(2005).
-
Self-limiting Epitaxial Growth for Generation of Semiconductor Surface Nanotemplates and Nanostructures.
I Workshop on Surface Nanopatterning, Pisa, June 2005. (invited)
(2005).
-
Assessment of quantum dot electronic level structure using TEM and cathodoluminescence.
I Microscopy Conference, Davos, September 2005
(2005).
-
Multilayer piezoelectric copolymer transducers.
I Ultrasonics Symposium
(2005).
-
Microstructure of Sputter Deposited Tin Doped Indium Oxide Films with Silver Additive.
Thin Solid Films, 479 479: 107 107-112 112
(2005).
-
Enhancement of the binding energy of charged excitons in disordered quantum.
Physical Review B: Condensed Matter and Materials Physics, 71(3): 33301-1
(2005).
-
Effects of post-deposition annealing on the material characteristics of ultrathin HfO2 films on silicon.
J Appl Phys, 97(2)
(2005).
-
Fabrication of electrical contacts to nanometre-sized materials using electron- and ion-assisted deposition in a focused ion beam machine.
I 5th int. conf, and 7th annual general meeting of the european society for precision engineering and nanotechnology, EUSPEN’05 (Montpellier, France, May 8-11, 2005).
(2005).
-
Nanocontacts fabricated by Focused Ion Beam (FIB): characterization and application to nanometer-sized materials.
I EUSPEN'05
(2005).
-
Structural and magnetic properties of Al2O3/Ni81Fe19 thin films: from superparamagnetic nanoparticles ferromagnetic multilayers.
J. Phys.: Condens. Matter, 17: 5027-5036
(2005).
-
Dynamic Magnetic Properties of Ni81Fe19/Al2O3 Multilayers.
J. Magn Magn. Mater., 286: 446-449
(2005).
-
Patterning of confined-state energies in site-controlled semiconductor quantum.
Applied Physics Letters, 86(24): 243105-1
(2005).
-
Electrodeposition of ferromagnetic Zn1-xMnxO.
I The Gordon Research Conf. on Electrodeposition, New London, NH, USA
(2004).
-
Deposition of palladium nanoparticles on the pore walls of anodic alumina using sequential electroless deposition.
Journal of Applied Physics, 96(9): 5189-5194
(2004).
-
Photoelectrochemical study of sputtered nitrogen-doped titanium dioxide thin films in aqueous electrolyte.
Solar Energy Materials and Solar Cells, 84(1-4): 145-157
(2004).
-
Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition.
Applied Physics A, . 79(3): 573-7 DOI
(2004).
-
Scratch testing of a dental restorative material based on calcium aluminate.
I 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Cocoa Beach
(2004).
-
Photoelectrochemical Study of Nitrogen-Doped Titanium Dioxide for Water Oxidation.
Journal of Physical Chemistry B, 108(19): 5995-6003
(2004).
-
Electrochemical synthesis of zinc manganese oxide as diluted magnetic semiconductor, Nano and Giga Challenges.
I Microelectronics Symposium, Cracow
(2004).
-
Chemically Bonded Ceramics as Biomaterials.
I Key Engineering materials, 437-442
(2003).
-
Machinability of high performance die steels.
I Transactions of the 22nd International Die Casting Congress and Exposition, Rosemont, Ill.: North American Die Casting Association. 327-335
(2003).
-
Novel load-carrying layers to support low-friction PVD coatings.
Surface and Coatings Technology, 176 176: 14 14-22 22
(2003).
-
Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies.
Thin Solid Films, 414(2): 224-230 DOI
(2002).
-
Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements.
Materials Science and Engineering A, 336(1-2): 7-21 DOI
(2002).
-
Effects of substrate bias polarity on tribological a-C:Ta coatings.
I AUSTRIB ´02, Perth
(2002).
-
Mechanical and tribological requirements and evaluation of coating composites.
I Modern Tribology Handbook, . 931-960
(2001).
-
Bacteria as workers in the living factory: metal-accumulating bacteria and their potential for materials science.
Trends in Biotechnology, . 19(1): 15-20 DOI
(2001).
-
Mapping of mechanical properties of WC-Co using nanoindentation.
Tribology letters, . 8(2-3): 147-152 DOI
(2000).
-
Evaluation of a flexible physical vapor deposited TiC-C coating system.
Surface & Coatings Technology, 124(2-3): 154-161 DOI
(2000).
-
The multilayer effect in abrasion: optimising the combination of hard and tough phases.
Surface & Coatings Technology, . 116-119: 1138-1144 DOI
(1999).
-
Influence of residual stresses on fracture and delamination of thin hard coatings.
Wear, . 232(2): 262-269 DOI
(1999).
-
The contact resistance of rolling silver coated copper contacts.
I Proc. 43rd IEEE Holm Conf. on Electrical Contacts, 33-40
(1997).
-
Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere.
Tribology International, 30(3): 165-175 DOI
(1997).
-
Cracking resistance of thin hard coatings estimated by four-point bending.
Surface and coatings technology, . 91(1-2): 57-63 DOI
(1997).
-
Tribologi i elektriska kontakter: en problempresentation.
Tribologia, 15(2): 16-36
(1996).
-
The role of gross plastic fretting in serviceability and deterioration of power contacts.
I 42nd IEEE Holm Conf. on Electrical Contacts jointly with 18th Int. Conf. on Electrical Contacts, Chicago, Sept. 16-20., 352-362 DOI
(1996).
-
Gross plastic fretting - mechanical deterioration of silver coated electrical contacts..
Wear, 201(1-2): 244-254 DOI
(1996).
-
Gross plastic fretting - examination of the gross weld regime..
Wear, 201(1-2): 255-264 DOI
(1996).
-
Surface damage, adhesion and contact resistance of siler coated plated copper contacts subjected to fretting motion.
Wear, 165(2): 227-230 DOI
(1993).
-
A new test method for the intrinsic abrasion resistance of thin coatings.
Surface & Coatings Technology, 50(1): 75-84 DOI
(1991).
-
How TiN coatings improve the performance of high speed steel cutting tools..
Surface & Coatings Technology, 41(2): 243-256 DOI
(1990).
-
Compressive fatigue properties of a high-strength, degradable calcium phosphate bone cement – influence of porosity and environment.
Opublicerat manuskript. -
A simple TEM method for fast thickness characterization of suspendedgraphene flakes.
Opublicerat manuskript. -
Nanoindentation on micro pillars for determination of intrincic hardness and residual stress in coatings deposited on complex geometries.
Opublicerat manuskript. -
Enhancing silver through embedding of fullerene like WS2 for sliding electrical contacts.
Opublicerat manuskript. -
An in-situ prepared nano-manipulator for electrical characterization of carbon nanosheets inside a FIB-SEM.
Opublicerat manuskript. -
Systematic assessment of trapped gold nanoparticles in a nanogap platform for electrical characterization of conducting and non-conducting molecules.
Opublicerat manuskript. -
Using a nanocontact platform for evaluating of molecular electronics.
I -
In-situ electrical characterization during defect insertion in exfoliated graphene sheets with a focused gallium ion beam at room and cryogenic temperatures.
Opublicerat manuskript. -
Fabrication and characterization of high resistance sub-5 nm gaps made by electrodeposition of gold in 30 nm gaps cut by using a focused gallium ion beam.
Opublicerat manuskript. -
Bioceramic microneedles with flexible and self-swelling substrate.
Submitted. -
Ion Beam Synthesis of Luminescent Silicon Nanoparticles.
Opublicerat manuskript. -
Tribofilm formation on combustion engine valves – influence of additive content in the oil.
Opublicerat manuskript. -
Wear performance of a new biocompatible silicon nitride for biomedical applications.
Opublicerat manuskript. -
Combustion valve simulation rig with particle flow.
Lubrication Science Submitted. -
Adjustable nanostructure of synthetic geopolymers enables tunable and sustained release of oxycodone.
Submitted. -
Assessing the hardness and residual stress at the very edge of a TiAlN coated cutting insert.
Surface and coatings technology . Submitted. -
Superconductivity in amorphous MoxGe100-x: insights from first principles.
Opublicerat manuskript. -
First-principles prediction of energy band gaps in 18-valence electron semiconducting half-Heusler compounds: Exploring the role of exchange and correlation.
Opublicerat manuskript. -
Influence of alignment between extended tool ridges and the wood structure on the defibration mechanisms in groundwood pulping experiments.
Opublicerat manuskript. -
Systematic assessment of a nanoparticle bridge platform for molecular electronics measurements.
Opublicerat manuskript. -
The effect of induced vacancy defects on resistivity of graphene.
I Scandem conference -
Large Variations in Shelf-life of Gold Nanoelectrode Gaps and Molecular Electronic Devices Stored in Air, Water and Organic Solvents.
Opublicerat manuskript. -
Realization of highly reproducible molecular junctions in a nanoparticle-alkanedithiol-nanoelectrode bridge platform.
Opublicerat manuskript. -
Electrical Characterization of Defect induced Graphene Nanosheets.
I Nanotech Europe, Berlin, 28-30 Sep 2009 -
Development of a novel multifunctional hydroxyapatite coating for orthopedic implants.
Opublicerat manuskript. -
Thickness dependency of surface properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM®).
Additive Manufacturing Submitted. -
Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM®).
Additive Manufacturing . Submitted. -
Vibrational signatures in inelastic tunneling spectroscopy from short molecule-nanoparticle chains trapped in versatile nanoelectrodes.
Opublicerat manuskript. -
Surface and subsurface deformation of polyamide and poly-ether-ether-ketone composites sliding against steel cylinders.
Opublicerat manuskript. -
Tribofilm formation from TiC and nanocomposite TiAlC coatings, analysis by means of FIB and TEM.
Submitted. -
A ready-to-use acidic calcium phosphate cement.
Opublicerat manuskript. -
The addition of poly(vinyl alcohol) fibres to apatitic calcium phosphate cement can improve its toughness.
Opublicerat manuskript. -
On Ta diffusion in Cu and Ag thin films.
Opublicerat manuskript. -
A study on diffusion of hydrogen peroxide through enamel.
Submitted. -
The role of aluminium additions in the oxidation and wear of a TaC:C low-friction coating.
Opublicerat manuskript. -
The role of aluminium additions in the oxidation and wear of TaC:C low-friction coating.
Opublicerat manuskript. -
The use of calcium carbonate cements as drug carriers.
I GRIBOI Congress, Turin, March 2010 -
Fretting behaviour of silicon nitride against biomedical alloys for joint replacements.
Opublicerat manuskript. -
A biomechanical test model for evaluating osseous and osteochondral tissue adhesives..
BMC Biomedical engineering . Submitted. -
A Study for Tooth Bleaching via Carbamide Peroxide Loaded Calcium Phosphate Spheres.
Submitted. -
A study for tooth bleaching via carbamide peroxide loaded hollow calcium phosphate spheres.
Dentistry Journal Accepted. -
A general strategy for synthesis of inorganic spheres via magnesium.
Submitted. -
Structural and magnetic properties of amorphous CoxZr100-x films.
Submitted. -
Long-term mechanical properties of a low-modulus bone cement for the treatment of vertebral compression fractures.
In press. -
A site-specific focused-ion-beam lift-out method for cryo transmission electron microscopy.
Opublicerat manuskript. -
Rate effects on localized shear deformation during nanosectioning of an amorphous thermoplastic polymer.
Submitted. -
Abrasive wear of hardmetals with a binder phase forming deformation induced martensite.
Opublicerat manuskript. -
Orientation of binder phase lamellae formed through grain boundary sliding in hardmetal turning inserts.
Opublicerat manuskript. -
Brushite foams - the effect of Tween® 80 and Pluronic® F-127 on foam porosity and mechanical properties.
Journal of Biomedical Materials Research. Part B - Applied biomaterials Submitted. -
The Broad Role of Nkx3.2 in the Development of the Zebrafish Axial Skeleton.
Opublicerat manuskript. DOI -
Formation of ω-Thiol Protected α,ω-Alkanedithiol Coated Gold Nanoparticles and Usage in Molecular Charge Transport Junctions.
Opublicerat manuskript. -
Investigation of the factors that affect the fabrication of highly conducting NP-molecule junctions inside sub 20 nm molecular electronic devices..
Opublicerat manuskript. -
Sub 20 nm metal-conjugated molecule junctions acting as a nitrogen dioxide sensor.
Opublicerat manuskript. -
Change of random telegraph conductance signal in different gas atmospheres in a nano molecular electronic device.
Opublicerat manuskript. -
Measurements of low-conductance single molecules using gold nanoelectrodes: limitations and considerations.
Opublicerat manuskript. -
Sonochemical exfoliation of intercalated graphite: the influence of the solvent properties.
Opublicerat manuskript. -
Graphene Formation by Sonochemical Exfoliation of Bromine-intercalated Graphite.Influence of Solvent Properties on Exfoliation Yield and Deposition Outcome.
Opublicerat manuskript. -
Quantification of strains and cracks in trabecular bone by digital volume correlation: A case study.
Opublicerat manuskript. -
The effect of augmentation materials on screw pullout resistance from human trabecular bone.
Opublicerat manuskript. -
3D-printed PLA/HA composite structures as synthetic trabecular bone: a feasibility study using Fused Deposition Modelling.
Opublicerat manuskript. -
Electron tomography analysis of the interfacial nanostructures between the Si networks and SiC nanoparticles in the thermally annealed Si rich SiC films.
Opublicerat manuskript. -
Bonding symmetry and structural analysis of the hIAPP protein aggregates using the electron tomography technique.
Opublicerat manuskript. -
Adhesives from Inorganic Nanoparticles and Low-Molecular-Weight Organic Compounds.
Opublicerat manuskript. -
In vivo evaluation of an injectable premixed radiopaque calcium phosphate cement International Journal of Biomaterials.
International Journal of Biomaterials Submitted.