Publications

Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Goetz, Inga K.; Pacheco, Victor; Hassila, Carl J.; Jansson, Ulf et al.

Part of Materials, 2023.

Article in journal

DOI for Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy Download full text (pdf) of Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy

Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water

Jayaraj, J.; Elo, Robin; Surreddi, Kumar Babu; Olsson, Mikael

Part of International journal of refractory metals & hard materials, 2023.

Article in journal

DOI for Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water Download full text (pdf) of Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water

Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment

Johansson, Pontus; Elo, Robin; Naeini, Vahid Fadaei; Marklund, Par et al.

Part of Tribology letters, 2023.

Article in journal

DOI for Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment Download full text (pdf) of Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment

Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan et al.

Part of Wear, p. 528-529, 2023.

Article in journal

DOI for Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Hassila, Carl Johan

Additive Manufacturing of Ni-Fe Superalloys: Exploring the Alloying Envelope and the Impact of Process on Mechanical Properties

2022.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Hassila, Carl Johan

Holmberg, Anders

Contact fatigue and crack propagation studies of sintered PM steel

2022.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Holmberg, Anders

Crack initiation and early propagation in case hardened sintered PM steels under cyclic load

Holmberg, Anders; Wiklund, Urban; Isaksson, Per; Kassman Rudolphi, Åsa

Part of Powder Metallurgy, p. 1-12, 2022.

Article in journal

DOI for Crack initiation and early propagation in case hardened sintered PM steels under cyclic load Download full text (pdf) of Crack initiation and early propagation in case hardened sintered PM steels under cyclic load

Insights into plastic deformation and binder lamella orientation in hardmetal turning inserts

Ostby, Jonas; Toller-Nordström, Lisa; Norgren, Susanne

Part of International journal of refractory metals & hard materials, 2022.

Article in journal

DOI for Insights into plastic deformation and binder lamella orientation in hardmetal turning inserts

Larsson, Elin

New insights into lubricated tribological contacts

2022.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Larsson, Elin

Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625

Malmelöv, Andreas; Hassila, Carl Johan; Fisk, Martin; Wiklund, Urban et al.

Part of Materials & design, 2022.

Article in journal

DOI for Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625 Download full text (pdf) of Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process

Hassila, C.J.; Paschalidou, Eirini-Maria; Harlin, P.; Wiklund, Urban

Part of Materials & design, p. 110928-110928, 2022.

Article in journal

DOI for Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process Download full text (pdf) of Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process

Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting

Lindwall, Johan; Ericsson, Anders; Marattukalam, Jithin James; Hassila, Carl Johan et al.

Part of JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, p. 1165-1178, 2022.

Article in journal

DOI for Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting Download full text (pdf) of Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting

Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Larsson, Elin; Donzel-Gargand, Olivier; Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology International, 2022.

Article in journal

DOI for Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Tribological evaluation of a boric acid fuel additive in various engine fuels

Larsson, Elin; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 204381-, 2022.

Article in journal

DOI for Tribological evaluation of a boric acid fuel additive in various engine fuels Download full text (pdf) of Tribological evaluation of a boric acid fuel additive in various engine fuels

Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis

Larsson, Elin; Westbroek, René; Leckner, Johan; Jacobson, Staffan et al.

Part of Wear, 2022.

Article in journal

DOI for Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis Download full text (pdf) of Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis

Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model

Larsson, Elin; Westbroek, René; Leckner, Johan; Jacobson, Staffan et al.

Part of Wear, 2022.

Article in journal

DOI for Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model Download full text (pdf) of Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, H.; Wiklund, Urban; Kawamura, S. et al.

Part of Wear, 2022.

Article in journal

DOI for Wear of cemented carbide forging dies used in zipper production Download full text (pdf) of Wear of cemented carbide forging dies used in zipper production

Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases

Larsson, Elin; Westbroek, Rene; Leckner, Johan; Jacobson, Staffan et al.

Part of Wear, 2021.

Article in journal

DOI for Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases Download full text (pdf) of Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases

Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, K. et al.

Part of Wear, 2021.

Article in journal

DOI for Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite Download full text (pdf) of Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Heldin, Magnus; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, 2021.

Article in journal

DOI for On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals Download full text (pdf) of On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Olander, Petra; Heinrichs, Jannica

Part of Tribology - Materials, Surfaces & Interfaces, p. 181-192, 2021.

Article in journal

DOI for On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces Download full text (pdf) of On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Rock adhering to cemented carbide surfaces: The role of image acquisition

Elo, Robin; Norgren, Susanne

Part of Wear, 2021.

Article in journal

DOI for Rock adhering to cemented carbide surfaces: The role of image acquisition Download full text (pdf) of Rock adhering to cemented carbide surfaces: The role of image acquisition

Semi in-situ measurement of microstructural changes in PM steel during indentation

Holmberg, Anders; Andersson, Michael; Wiklund, Urban; Kassman Rudolphi, Åsa

Part of Euro PM2021 Proceedings, 2021.

Conference paper

Download full text (pdf) of Semi in-situ measurement of microstructural changes in PM steel during indentation

Towards understanding plastic deformation in hardmetal turning inserts with different binders

Toller-Nordström, Lisa; Östby, Jonas; Norgren, Susanne

Part of International journal of refractory metals & hard materials, 2021.

Article in journal

DOI for Towards understanding plastic deformation in hardmetal turning inserts with different binders

Tribological behaviour and transfer layer development of self-lubricating polymer composite bearing materials under long duration dry sliding against stainless steel

Rodiouchkina, Maria; Lind, Jonna; Pelcastre, Leonardo; Berglund, Kim et al.

Part of Wear, 2021.

Article in journal

DOI for Tribological behaviour and transfer layer development of self-lubricating polymer composite bearing materials under long duration dry sliding against stainless steel

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Kawamura, Shingo et al.

2021.

Conference paper

Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2021.

Article in journal

DOI for Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper Download full text (pdf) of Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings

Goel, Sneha; Bjorklund, Stefan; Curry, Nicholas; Govindarajan, Sivakumar et al.

Part of Applied Sciences, 2020.

Article in journal

DOI for Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings Download full text (pdf) of Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings

Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools

Heldin, Magnus; Wiklund, Urban

Part of Nordic Pulp & Paper Research Journal, p. 25-33, 2020.

Article in journal

DOI for Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools

Influence of Nitrogen Content on Microstructure and Mechanical Properties of Laser Powder Bed Fusion Processed Alloy 625

Hassila, Carl Johan; Harlin, Peter; Wiklund, Urban

Part of World PM 2020, 27/6-1/7 2020, Montreal, Kanada, 2020.

Conference paper

Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears

Bergstedt, Edwin; Holmberg, Anders; Lindholm, Per; Olofsson, Ulf

Part of Tribology Transactions, p. 1076-1084, 2020.

Article in journal

DOI for Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears Download full text (pdf) of Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears

Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale

Carlsson, Jenny; Heldin, Magnus; Isaksson, Per; Wiklund, Urban

Part of Holzforschung, p. 477-487, 2020.

Article in journal

DOI for Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale

Tailoring residual stresses in CrN_x films on alumina and silicon deposited by high-power impulse magnetron sputtering

Elo, Robin; Jacobson, Staffan; Kubart, Tomas

Part of Surface & Coatings Technology, 2020.

Article in journal

DOI for Tailoring residual stresses in CrN_x films on alumina and silicon deposited by high-power impulse magnetron sputtering Download full text (pdf) of Tailoring residual stresses in CrN_x films on alumina and silicon deposited by high-power impulse magnetron sputtering

The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

Marattukalam, Jithin James; Karlsson, Dennis; Pacheco, Victor; Beran, Přemysl et al.

Part of Materials & design, 2020.

Article in journal

DOI for The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS Download full text (pdf) of The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2020.

Article in journal

DOI for Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test

Fowler, Lee; Janson, Oscar; Engqvist, Håkan; Norgren, Susanne et al.

Part of Materials science & engineering. C, biomimetic materials, sensors and systems, p. 707-714, 2019.

Article in journal

DOI for Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test

Boundary conditions for simulation of powder bed fusion for metallic glass formation: measurements and calibrations

Lindwall, J.; Hassila, Carl Johan; Marattukalam, Jithin J.; Lundbäck, A.

Part of Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), p. 51-59, 2019.

Conference paper

Cemented carbide wear initiation in sliding contact with iron ore

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Part of Proceedings of 2nd Sweden-China Symposium on Tribology, 2019.

Conference paper

Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal

Toller-Nordström, Lisa; Mingard, K.; Norgren, Susanne

Part of Materials Characterization, 2019.

Article in journal

DOI for Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal

Heldin, Magnus

Designing grinding tools to control and understand fibre release in groundwood pulping

2019.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Heldin, Magnus

Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu

Fowler, Lee; Masia, Nomsombuluko; Cornish, Lesley A.; Chown, Lesley H. et al.

Part of Materials, 2019.

Article in journal

DOI for Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu Download full text (pdf) of Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu

Evaluation of well-defined tool surface designs for groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of BioResources, p. 9575-9587, 2019.

Article in journal

DOI for Evaluation of well-defined tool surface designs for groundwood pulping Download full text (pdf) of Evaluation of well-defined tool surface designs for groundwood pulping

Experimental study of carbides in the Ti-Cr-C system

Haglöf, F.; Kaplan, B.; Norgren, Susanne; Blomqvist, A. et al.

Part of Journal of Materials Science, p. 12358-12370, 2019.

Article in journal

DOI for Experimental study of carbides in the Ti-Cr-C system Download full text (pdf) of Experimental study of carbides in the Ti-Cr-C system

Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Part of International journal of refractory metals & hard materials, 2019.

Article in journal

DOI for Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Influences of load and temperature on groundwood pulping with well-defined tools

Heldin, Magnus; Wiklund, Urban

Part of Wear, 2019.

Article in journal

DOI for Influences of load and temperature on groundwood pulping with well-defined tools Download full text (pdf) of Influences of load and temperature on groundwood pulping with well-defined tools

Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Part of Wear, p. 1658-1666, 2019.

Article in journal

DOI for Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Initiation and propagation of tool wear in turning of titanium alloys –: evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Part of Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019.

Conference paper

Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact

Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

Part of Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.

Conference paper

Toller-Nordström, Lisa

Insights into wear and deformation of alternative binder hardmetals

2019.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Toller-Nordström, Lisa

Investigation of copper alloying in a TNTZ-Cu_x alloy

Fowler, Lee; Van Vuuren, Arno Janse; Goosen, William; Engqvist, Håkan et al.

Part of Materials, 2019.

Article in journal

DOI for Investigation of copper alloying in a TNTZ-Cu_x alloy Download full text (pdf) of Investigation of copper alloying in a TNTZ-Cu_x alloy

On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale

Heldin, Magnus; Carlsson, Jenny; Isaksson, Per; Wiklund, Urban

Part of The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019.

Conference paper

Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

Hassila, Carl Johan; Harlin, P.; Wiklund, Urban

Part of Wear, p. 1837-1845, 2019.

Article in journal

DOI for Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625 Download full text (pdf) of Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

Rolling Fatigue Life of PM Steel: Influence of Sintering Temperature and Powder Particle Size

Holmberg, Anders; Kassman Rudolphi, Åsa

Part of Euro PM 2019 Proceedings, 2019.

Conference paper

Download full text (pdf) of Rolling Fatigue Life of PM Steel: Influence of Sintering Temperature and Powder Particle Size

Rolling fatigue life of PM steel with different porosity and surface finish

Holmberg, Anders; Andersson, Michael; Kassman Rudolphi, Åsa

Part of Wear, p. 454-461, 2019.

Article in journal

DOI for Rolling fatigue life of PM steel with different porosity and surface finish Download full text (pdf) of Rolling fatigue life of PM steel with different porosity and surface finish

Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites

Yildiz, Ahmet Bahadir; Weidow, Jonathan; Ryukhtin, Vasyl; Norgren, Susanne et al.

Part of Scripta Materialia, p. 106-109, 2019.

Article in journal

DOI for Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites Download full text (pdf) of Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites

Wear mechanisms of tools for exploration drilling

Wiklund, Urban; Emy, Guttenkunst; Grandin, Martina; Toller, Lisa

Part of Euromat 2019, Stockholm, Sweden, p. 787-, 2019.

Conference paper

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

Part of Wear, p. 96-107, 2019.

Article in journal

DOI for Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Abrasion resistance of drill bit steels in flowing saltwater

Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.

Conference paper

Abrasion resistance of new wear resistant AM steels

Söderbäck, Per; Beste, Ulrik; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.

Conference paper

Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving

Larsson, Elin; Olander, Petra; Jacobson, Staffan

Part of Tribology International, p. 302-312, 2018.

Article in journal

DOI for Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving

Comparison of test methods estimating the stiffness of ultrathin coatings

Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

Part of Journal of Coatings Technology and Research, p. 743-752, 2018.

Article in journal

DOI for Comparison of test methods estimating the stiffness of ultrathin coatings Download full text (pdf) of Comparison of test methods estimating the stiffness of ultrathin coatings

Fatigue performance of a high-strength, degradable calcium phosphate bone cement

Ajaxon, Ingrid; Holmberg, Anders; Öhman, Caroline; Persson, Cecilia

Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 46-52, 2018.

Article in journal

DOI for Fatigue performance of a high-strength, degradable calcium phosphate bone cement Download full text (pdf) of Fatigue performance of a high-strength, degradable calcium phosphate bone cement

Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

Roizard, X.; Heinrichs, Jannica; Buteri, A.; Jacobson, Staffan et al.

Part of Tribology International, p. 465-473, 2018.

Article in journal

DOI for Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

High resolution STEM investigation of interface layers in cemented carbides

Meingast, Arno; Coronel, Ernesto; Blomqvist, Andreas; Norgren, Susanne et al.

Part of International journal of refractory metals & hard materials, p. 135-140, 2018.

Article in journal

DOI for High resolution STEM investigation of interface layers in cemented carbides

Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

Grandin, Martina; Wiklund, Urban

Part of Tribology International, p. 1-9, 2018.

Article in journal

DOI for Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

Influences of grinding surface alignment in groundwood pulping of Norway spruce

Heldin, Magnus; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018.

Conference paper

Initial surface failure and wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Almqvist, Bjarne; Jacobson, Staffan

Part of Wear, p. 43-55, 2018.

Article in journal

DOI for Initial surface failure and wear of cemented carbides in sliding contact with different rock types

On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 141-151, 2018.

Article in journal

DOI for On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

On the dramatic wear protecting effect of tribofilms on wear of combustion engine valves

Elo, Robin; Jacobson, Staffan

2018.

Conference paper

On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology letters, 2018.

Article in journal

DOI for On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels Download full text (pdf) of On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Pitfalls in environmental endurance testing of electrical connectors – problem overview and discussion

Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

2018.

Conference paper

Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion

Sjögren, Lena; Hammam, Tag; Kassman Rudolphi, Åsa

Part of Proceedings of 2018 29th International Conference on Electrical Contacts and 64th IEEE Holm Conference on Electrical Contacts, p. 475-482, 2018.

Conference paper

DOI for Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion

Elo, Robin

Protective Tribofilms on Combustion Engine Valves

2018.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Elo, Robin

Rolling contact fatigue test performed on additively manufactured inconel 718 produced by selective laser melting

Hassila Karlsson, Carl Johan; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.

Conference paper

Study of tool wear and chemical interaction during machining of Ti6Al4V

Kaplan, B.; Odelros, S.; Kritikos, M.; Bejjani, R. et al.

Part of International journal of refractory metals & hard materials, p. 253-256, 2018.

Article in journal

DOI for Study of tool wear and chemical interaction during machining of Ti6Al4V

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Part of Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, p. 54-61, 2018.

Article in journal

DOI for Surface texturing to promote formation of protective tribofilms on combustion engine valves

Tribo-chemical wear testing of rock drill inserts

Jacobson, Felix; Norgren, Susanne; Wiklund, Urban

Part of The 18th Nordic Symposium on Tribology - Nordtrib 2018, Uppsala, Sweden, June 18-21, 2018, 2018.

Conference paper

Tribofilm formation of a boric acid fuel additive – Investigation of tribofilm properties

Larsson, Elin; Olander, Petra; Jacobson, Staffan

2018.

Conference paper

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

2018.

Conference paper

Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 227-235, 2018.

Article in journal

DOI for Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

Toller, Lisa

Alternative binder hardmetals for steel turning

2017.

Licentiate thesis, comprehensive summary

Download full text 1 (pdf) of Toller, Lisa Download full text 2 (pdf) of Toller, Lisa

Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

Sun, Fengzhen; Wiklund, Urban; Aviles, F.; Gamstedt, E. Kristofer

Part of Composites Science And Technology, p. 95-102, 2017.

Article in journal

DOI for Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Goel, S.; Bjorklund, S.; Curry, N.; Wiklund, Urban et al.

Part of Surface & Coatings Technology, p. 80-87, 2017.

Article in journal

DOI for Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

Larsson, Elin; Olander, Petra; Jacobson, Staffan

2017.

Conference paper

Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

Larsson, Elin; Olander, Petra; Jacobson, Staffan

Part of Wear, p. 822-830, 2017.

Article in journal

DOI for Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test

Boric acid as a lubricating fuel additive: Optimization of a lab test to understand fuel consumption reduction in field tests

Larsson, Elin; Olander, Petra; Jacobson, Staffan

p. 1-1 2017.

Conference paper

Download full text (pdf) of Boric acid as a lubricating fuel additive: Optimization of a lab test to understand fuel consumption reduction in field tests

Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films

Tavares da Costa, Marcus Vinicius; Bolinsson, Jessica; Neagu, Cristian; Fayet, Pierre et al.

2017.

Conference paper

Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Wear, p. 9-17, 2017.

Article in journal

DOI for Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Examination of wear damage to rock-mining hardmetal drill bits

Jones, H. G.; Norgren, Susanne; Kritikos, M.; Mingard, K. P. et al.

Part of International journal of refractory metals & hard materials, p. 1-10, 2017.

Article in journal

DOI for Examination of wear damage to rock-mining hardmetal drill bits

Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining

Odelros, S.; Kaplan, B.; Kritikos, M.; Johansson, Malin et al.

Part of Wear, p. 115-124, 2017.

Article in journal

DOI for Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining

Experimental evaluation of contact stiffness and damping to sustain transients and resonances

Kryniski, Krystof; Kassman Rudolphi, Åsa; Zhao, Su; Lindholm, Per

2017.

Conference paper

Fatigue life of a brushite cement under cyclic compressive loading

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

2017.

Conference paper

Fretting behavior of PP grease lubricated PPS and PA composites

Lind, Jonna; Kassman Rudolphi, Åsa

2017.

Conference paper

Friction dissipation under tangential high freequency excitation

Lindholm, Per; Kryniski, Krystof; Zhao, Su; Kassman Rudolphi, Åsa

2017.

Conference paper

Grease lubricated fretting - Influence of base oil viscosity and material combination

Larsson, Elin; Leckner, Johan; Westbroek, René; Kassman Rudolphi, Åsa

2017.

Conference paper

Grease lubricated fretting of silver coated copper electrical contacts

Larsson, Elin; Andersson, Anna M; Kassman Rudolpi, Åsa

2017.

Conference paper

Grease lubricated fretting of silver coated copper electrical contacts

Larsson, Elin; Andersson, Anna M.; Kassman Rudolphi, Åsa

Part of Wear, p. 634-642, 2017.

Article in journal

DOI for Grease lubricated fretting of silver coated copper electrical contacts

Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 7-13, 2017.

Article in journal

DOI for Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Investigation of Cemented Carbides with Alternative Binders after CVD Coating

Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

Part of International journal of refractory metals & hard materials, p. 225-229, 2017.

Article in journal

DOI for Investigation of Cemented Carbides with Alternative Binders after CVD Coating

Life time of cemented carbide inserts with Ni-Fe binder in steel turning

Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

Part of Wear, p. 1822-1829, 2017.

Article in journal

DOI for Life time of cemented carbide inserts with Ni-Fe binder in steel turning

Life time of cemented carbide inserts with Ni-Fe binder in steel turning

Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

2017.

Conference paper

Mechanisms of plastic deformation in WC-Co and WC-Ni-Fe turning inserts

Toller, Lisa; Norgren, Susanne

2017.

Conference paper

Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Olsson, Mikael; Yvell, K.; Heinrichs, Jannica; Bengtsson, M. et al.

Part of Wear, p. 81-92, 2017.

Article in journal

DOI for Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements

Heldin, Magnus; Wiklund, Urban

Part of 21st International Conference on Wear of Materials, Long Beach, March 26-30, 2017.

Conference paper

Titanium-Copper alloy as an antibacterial biomaterial

Fowler, Lee; Janson, Oscar; Norgren, Susanne; Engqvist, Håkan et al.

Part of Titanium-Copper alloy as an antibacterial biomaterial, 2017.

Conference paper

Lind, Jonna

Tribology of polymer composites for elevated temperature applications

2017.

Licentiate thesis, comprehensive summary

Download full text (pdf) of Lind, Jonna

Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 1429-1436, 2017.

Article in journal

DOI for Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

A test method for mapping the contact force limit of polymer materials in sliding contact

Kassman Rudolphi, Åsa; Edling, Erika; Zhao, Su; Öberg, Åke

2016.

Conference paper

Boric acid as a lubricating fuel additive: Adaption of a labtest technique to mimic piston/cylinder conditions

Larsson, Elin; Olander, Petra; Jacobson, Staffan

2016.

Conference paper

Download full text (pdf) of Boric acid as a lubricating fuel additive: Adaption of a labtest technique to mimic piston/cylinder conditions

Boric acid as a lubricating fuel additive: Lab experiments to understand fuel savings in field test

Larsson, Elin; Olander, Petra; Jacobson, Staffan

2016.

Conference paper

Download full text (pdf) of Boric acid as a lubricating fuel additive: Lab experiments to understand fuel savings in field test

Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

Mao, Fang; Taher, Mamoun; Kryshtal, Oleksandr; Kruk, Adam et al.

Part of ACS Applied Materials and Interfaces, p. 30635-30643, 2016.

Article in journal

DOI for Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties Download full text (pdf) of Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

Cross section microscopy studies of wear tested polymer composites

Lind, Jonna; Kassman Rudolphi, Åsa

2016.

Conference paper

Cross sections studies of polymer composites

Lind, Jonna; Kassman Rudolphi, Åsa

2016.

Conference paper

Deep cryogenic treatment of tool steels

Podgornik, B.; Paulin, I.; Zajec, B.; Jacobson, Staffan et al.

Part of Journal of Materials Processing Technology, p. 398-406, 2016.

Article in journal

DOI for Deep cryogenic treatment of tool steels

Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation

Gustavsson, Fredrik; Jacobson, Staffan

Part of Tribology International, p. 340-347, 2016.

Article in journal

DOI for Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation

Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Wear, p. 379-389, 2016.

Article in journal

DOI for Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Tribology International, p. 337-348, 2016.

Article in journal

DOI for Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Evaluation of dry friction solutions for industrial applications

Edling, Erika; Kassman Rudolphi, Åsa; Andersson, Anna; Zhao, Su et al.

2016.

Conference paper

Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

2016.

Conference paper

Download full text (pdf) of Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling

Aiso, Toshiharu; Wiklund, Urban

Part of Tribology - Materials, Surfaces & Interfaces, p. 107-116, 2016.

Article in journal

DOI for Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling

Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Tribology International, p. 414-424, 2016.

Article in journal

DOI for Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

Initial wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2016.

Conference paper

Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

Heldin, Magnus; Isaksson, Per; Wiklund, Urban

Part of Nordic Pulp & Paper Research Journal, p. 401-406, 2016.

Article in journal

Download full text (pdf) of Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Roizard, X.; Heinrichs, Jannica; Taouil, A. Et; Jacobson, Staffan et al.

Part of Tribology International, p. 141-148, 2016.

Article in journal

DOI for Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Investigation of material transfer in sliding friction-topography or surface chemistry?

Westlund, Viktoria; Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Tribology International, p. 213-223, 2016.

Article in journal

DOI for Investigation of material transfer in sliding friction-topography or surface chemistry? Download full text (pdf) of Investigation of material transfer in sliding friction-topography or surface chemistry?

Long-term degradation of brushite cements in three different liquids

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

2016.

Conference paper

Micrometre compressions to facilitate controlled wear in groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June, 2016.

Conference paper

Nitro carburized steels for high stress tribological components – influence on seizure limits from steel grade and surface treatment parameters

Westlund, Viktoria; Jacobson, Staffan

2016.

Conference paper

On the self-healing of silver contacts

Öberg, Åke; Johansson, Erik; Arnell, Sylva; Kassman Rudolphi, Åsa

Part of ICEC2016, p. 265-270, 2016.

Conference paper

Phase transformations in iron-based alternative binders for hardmetals

Toller, Lisa; Norgren, Susanne

2016.

Conference paper

Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models"

Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

Part of Tribology letters, 2016.

Article in journal

DOI for Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models"

Steel turning with nickel-iron bound hard metal tools – a study on microstructure in plastically deformed inserts

Toller, Lisa; Jacobson, Staffan; Norgren, Susanne

2016.

Conference paper

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

2016.

Conference paper

The influence of porosity on the fatigue properties of brushite cement

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

Part of Biomaterials for tissue engineering models, 2016.

Conference paper

Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 138-147, 2016.

Article in journal

DOI for Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

Part of Tribology Transactions, p. 113-118, 2015.

Article in journal

DOI for A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

A labscale test equipment ot study the tool surface influence in pressure groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16, 2015.

Conference paper

Bone response to a novel Ti–Ta–Nb–Zr alloy

Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

Part of Acta Biomaterialia, p. 165-175, 2015.

Article in journal

Bone response to a novel Ti-Ta-Nb-Zr alloy

Stenlund, Patrik; Omar, Omar; Brohede, Ulrika; Norgren, Susanne et al.

Part of Acta Biomaterialia, p. 165-175, 2015.

Article in journal

DOI for Bone response to a novel Ti-Ta-Nb-Zr alloy

Cemented carbides based on WC pre-alloyed with Cr or Ta

Weidow, Jonathan; Blomqvist, Andreas; Salomonsson, Johanna; Norgren, Susanne

Part of International journal of refractory metals & hard materials, p. 36-41, 2015.

Article in journal

DOI for Cemented carbides based on WC pre-alloyed with Cr or Ta

Composition And Structure Of Bimodal WC-Co Materials Related To Mechanical Properties And Abrasive Wear

Yung, Der-Liang; Antonov, Maksim; Hussainova, Irina; Veinthal, Renno et al.

Part of M2D2015, p. 655-664, 2015.

Conference paper

CVD Coating Adhesion on Metal Cutting Insertswith Alternative Binders

Toller, Lisa; Larsson, Tommy; Jacobson, Staffan; Norgren, Susanne

2015.

Conference paper

Designed tools for controlling the defibration mechanisms in the pressure groundwood process

Heldin, Magnus; Wiklund, Urban

Part of International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20, 2015.

Conference paper

Effect of temperature on the performance of some polymer composites

Lind, Jonna; Kassman Rudolphi, Åsa

2015.

Conference paper

Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines

Elo, Robin; Jacobson, Staffan

Part of Wear, p. 193-198, 2015.

Article in journal

DOI for Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines

Friction and wear of PA66-PPA composites sliding against anodized aluminium cylinders

Lind, Jonna; Kassman Rudolphi, Åsa

2015.

Conference paper

Friction and wear studies of some PEEK materials

Lind, Jonna; Kassman Rudolphi, Åsa; Lindholm, Per O; Qin, Jian

Part of Tribologia - Finnish Journal of Tribology, p. 20-28, 2015.

Article in journal

Friction in curling –Fundamentals and applications of friction on ice illustrated by the Olympic winter sport: Keynote Talk

Jacobson, Staffan

2015.

Conference paper

Graphene as a lubricant on Ag for electrical contact applications

Mao, Fang; Wiklund, Urban; Andersson, Anna M.; Jansson, Ulf

Part of Journal of Materials Science, p. 6518-6525, 2015.

Article in journal

DOI for Graphene as a lubricant on Ag for electrical contact applications Download full text (pdf) of Graphene as a lubricant on Ag for electrical contact applications

Impact of fracture toughness on surface properties of PVD coated cold work tool steel

Podgornik, Bojan; Sedlaček, M.; Čekada, M.; Jacobson, Staffan et al.

Part of Surface & Coatings Technology, p. 144-150, 2015.

Article in journal

DOI for Impact of fracture toughness on surface properties of PVD coated cold work tool steel

Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2015.

Conference paper

Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 104-113, 2015.

Article in journal

DOI for Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Investigation of Cemented Carbides with Alternative Binders after CVD Coating

Toller, Lisa; Liu, Chunxin; Holmström, Erik; Larsson, Tommy et al.

2015.

Conference paper

INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

2015.

Conference paper

Material transfer – an underrated phenomenon in friction

Jacobson, Staffan

2015.

Conference paper

Mechanisms behind the promising tribological performance of a boric acid based lubricant additive

Olander, Petra; Johnsson, Elin; Jacobson, Staffan

Part of Proceedings of the 42th Leeds-Lyon Symposium on Tribology, 2015.

Conference paper

Progress in the development of the neutron flux monitoring system of the French GF:N-IV SFR: simulations and experimental validations.

Jammes, C.; Filliatre, P.; Elter, Zs.; Verma, Vasudha et al.

Part of 2015 4Th International Conference On Advancements In Nuclear Instrumentation Measurement Methods And Their Applications (Animma), 2015.

Conference paper

Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

Olander, Petra; Jacobson, Staffan

2015.

Conference paper

Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

Olander, Petra; Jacobson, Staffan

Part of Wear, p. 42-48, 2015.

Article in journal

DOI for Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms Download full text (pdf) of Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms

Soft rock scratches hard cemented carbide

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

2015.

Conference paper

Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

Part of Wear, p. 210-221, 2015.

Article in journal

DOI for Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

Olander, Petra; Eskildsen, Svend S.; Fogh, Jesper W.; Hollman, Patrik et al.

Part of Wear, p. 9-18, 2015.

Article in journal

DOI for Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon Download full text (pdf) of Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools

Anmark, Niclas; Bjork, Thomas; Ganea, Anna; Olund, Patrik et al.

Part of Wear, p. 13-22, 2015.

Article in journal

DOI for The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools Download full text (pdf) of The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools

Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data

Kaplan, Bartek; Blomqvist, Andreas; Selleby, Malin; Norgren, Susanne

Part of Calphad, p. 59-67, 2015.

Article in journal

DOI for Thermodynamic analysis of the W-Co-Cr system supported by ab initio calculations and verified with quaternary data

Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system

Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

Part of International journal of refractory metals & hard materials, p. 257-262, 2015.

Article in journal

DOI for Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system

Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)

Kaplan, Bartek; Norgren, Susanne; Schwind, Martin; Selleby, Malin

Part of International journal of refractory metals & hard materials, p. 400-405, 2015.

Article in journal

DOI for Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)

Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

Grandin, Martina; Nedfors, Nils; Sundberg, Jill; Jansson, Ulf et al.

Part of Surface & Coatings Technology, p. 210-218, 2015.

Article in journal

DOI for Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

A method for tribological evaluation of gradient surfaces

Nyberg, Harald; Grandin, Martina; Wiklund, Urban; Jacobson, Staffan

2014.

Conference paper

A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring

Grandin, Martina; Wiklund, Urban

Part of Proceedings of the 27th International Conference on Electrical Contacts, p. 237-243, 2014.

Conference paper

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

Part of Journal of Materials Processing Technology, p. 1467-1481, 2014.

Article in journal

DOI for Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator

Riddar, Frida; Kassman Rudolphi, Åsa

Part of Wear, p. 227-233, 2014.

Article in journal

DOI for Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator

Deformation-activated work material transfer to DLC coatings

Heinrichs, Jannica; Gustavsson, Fredrik; Olsson, Mikael; Jacobson, Staffan

2014.

Conference paper

Effect of PTFE on the tribological behaviour of PPS with glass fiber

Holmgren Lind, Jonna; Kassman Rudolphi, Åsa

Part of 1st International conference on polymer tribology (PolyTrib), 2014.

Conference paper

Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2

Kaplan, Bartek; Markstrom, Andreas; Norgren, Susanne; Selleby, Malin

Part of Metallurgical and Materials Transactions. A, p. 4820-4828, 2014.

Article in journal

DOI for Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2

Formation and degradation of protective tribofilms on diesel engine valve surfaces

Elo, Robin; Jacobson, Staffan

2014.

Conference paper

Friction and wear studies of some PEEK materials

Holmgren, Jonna; Kassman Rudolphi, Åsa

Part of 16th Nordic Symposium on Tribology (NORDTRIB), 2014.

Conference paper

Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications

Nygren, Kristian; Samuelsson, Mattias; Flink, Axel; Ljungcrantz, Henrik et al.

Part of Surface & Coatings Technology, p. 326-334, 2014.

Article in journal

DOI for Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications Download full text (pdf) of Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications

Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

Part of Surface & Coatings Technology, p. 86-94, 2014.

Article in journal

DOI for Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings Download full text (pdf) of Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings

Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling

Heinrichs, Jannica; Yvell, Karin; Olsson, Mikael; Jacobson, Staffan

2014.

Conference paper

Initiation of wood defibration, tribology at the fiber level

Heldin, Magnus; Wiklund, Urban; Isaksson, Per

Part of Nordtrib, Aarhus, Denmark, June 10-13, 2014.

Conference paper

Low-friction Sliding Without Lubrication– Five Working Material Concepts and Tribological Challenges

Jacobson, Staffan

2014.

Conference paper

Lubricants: Introduction to properties and performance

Torbacke, Marika; Kassman Rudolphi, Åsa; Kassfeldt, Elisabet

John Wiley & Sons, 2014.

Book

DOI for Lubricants: Introduction to properties and performance

Mechanisms for compositional variations of coatings sputtered from a WS2 target

Särhammar, Erik; Strandberg, Erik; Sundberg, Jill; Nyberg, Harald et al.

Part of Surface & Coatings Technology, p. 186-190, 2014.

Article in journal

DOI for Mechanisms for compositional variations of coatings sputtered from a WS2 target

Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities

Borgh, Ida; Hedstrom, Peter; Persson, Tomas; Norgren, Susanne et al.

Part of International journal of refractory metals & hard materials, p. 205-211, 2014.

Article in journal

DOI for Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

Part of Tribology - Materials, Surfaces & Interfaces, p. 14-20, 2014.

Article in journal

On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

2014.

Conference paper

On the sulphuric acid corrosion in large 2-stroke marine diesel engines

Eskildsen, Svend; Fogh, Jesper; Andersson, Henrik; Olander, Petra et al.

Part of Tribocorrosion 2014,  9-11 April 2014, University of Strathclyde, Glasgow, 2014.

Conference paper

Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations

Forsberg, Peter; Debord, Dominique; Jacobson, Staffan

Part of Tribology International, p. 150-155, 2014.

Article in journal

DOI for Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations

Scratch testing for mimicking the early stage of wood defibration

Heldin, Magnus; Wiklund, Urban

Part of Asiatrib, Agra, India, February 17-20, 2014.

Conference paper

Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon

Olander, Petra; Eskildsen S., Svend; Fogh W., Jesper; Hollman, P. et al.

Part of Proceedings of 16th Nordic Symposium on Tribology, 2014.

Conference paper

The delicate balance of tribofilm formation on combustion engine valves

Jacobson, Staffan

2014.

Conference paper

The effect of lubrication on the friction performance in pneumatic clutch actuators

Riddar, Frida; Kassman Rudolphi, Åsa

Part of Wear, p. 166-173, 2014.

Article in journal

DOI for The effect of lubrication on the friction performance in pneumatic clutch actuators

The importance of oil and particle flow for exhaust valve wear - An experimental study

Forsberg, Peter; Elo, Robin; Jacobson, Staffan

Part of Tribology International, p. 176-183, 2014.

Article in journal

DOI for The importance of oil and particle flow for exhaust valve wear - An experimental study

Thermodynamic analysis of the Co-Cr-C system

Kaplan, Bartek; Markstrom, Andreas; Blomqvist, Andreas; Norgren, Susanne et al.

Part of Calphad, p. 226-236, 2014.

Article in journal

DOI for Thermodynamic analysis of the Co-Cr-C system

Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jenei, Istvan Zoltan; Jacobson, Staffan

Part of Wear, p. 87-94, 2014.

Article in journal

DOI for Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces

Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Nyberg, Tomas et al.

Part of Tribology letters, p. 563-572, 2014.

Article in journal

DOI for Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces

Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Jacobson, Staffan et al.

Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 61-72, 2014.

Article in journal

DOI for Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

Wear mechanism differences of intake valves within heavy duty combustion engines

Elo, Robin; Jacobson, Staffan

2014.

Conference paper

Wear mechanism study of intake valve system in modern heavy duty combustion engines

Elo, Robin; Jacobson, Staffan

2014.

Conference paper

A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings

Gustavsson, Fredrik; Bugnet, Matthieu; Polcar, Tomas; Cavaleiro, Albano et al.

2013.

Conference paper

A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition

Arhammar, C.; Silvearv, F.; Bergman, Anders; Norgren, Susanne et al.

Part of Theoretical Chemistry accounts, p. 1433-, 2013.

Article in journal

DOI for A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition

All roads lead to Rome: On the numerous routes to low-friction WS2 tribofilms

Gustavsson, Fredrik; Jacobson, Staffan

2013.

Conference paper

Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models

Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

Part of Tribology letters, p. 379-385, 2013.

Article in journal

DOI for Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models

Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

2013.

Conference paper

Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

Forsberg, Peter; Gustavsson, Fredrik; Hollman, Patrik; Jacobson, Staffan

Part of Wear, p. 1351-1359, 2013.

Article in journal

DOI for Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig

Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 48-54, 2013.

Article in journal

DOI for Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings Download full text (pdf) of Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

Part of 19th International Conference on Wear of Materials 2013; 14-18 April 2013; Portland, OR, USA, 2013.

Conference paper

Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

Nyberg, Harald; Sundberg, Jill; Särhammar, Erik; Gustavsson, Fredrik et al.

Part of Wear, p. 987-997, 2013.

Article in journal

DOI for Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings

Friction, wear and surface damage mechanisms of pneumatic clutch actuators

Riddar, Frida; Kassman Rudolphi, Åsa

Part of Wear, p. 36-44, 2013.

Article in journal

DOI for Friction, wear and surface damage mechanisms of pneumatic clutch actuators

Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 1481-1491, 2013.

Article in journal

DOI for Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Grandin, Martina; Wiklund, Urban

2013.

Conference paper

Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions

Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

Part of Wear, p. 286-296, 2013.

Article in journal

DOI for Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions

Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

Part of Tribology International, p. 55-64, 2013.

Article in journal

DOI for Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Influence of Ti addition on the structure and properties of low-friction W–S–C coatings

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Gustavsson, Fredrik et al.

Part of Surface & Coatings Technology, p. 340-348, 2013.

Article in journal

DOI for Influence of Ti addition on the structure and properties of low-friction W–S–C coatings

Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

2013.

Conference paper

Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Heinrichs, Jannica; Olsson, M.; Jacobson, Staffan

Part of Wear, p. 1249-1256, 2013.

Article in journal

DOI for Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Tribology letters, p. 431-438, 2013.

Article in journal

DOI for Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

Pettersson, Maria; Tkachenko, S.; Schmidt, S.; Berlind, T. et al.

Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 41-47, 2013.

Article in journal

DOI for Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

2013.

Conference paper

Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation

Gustavsson, Fredrik; Svahn, Fredrik; Bexell, Ulf; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 616-626, 2013.

Article in journal

DOI for Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation

New experimental findings on the role of initial material transfer in determining friction and surface damage

Jacobson, Staffan; Heinrichs, Jannica; Olsson, Mikael

2013.

Conference paper

On a wear test for rock drill inserts

Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

Part of Wear, p. 109-115, 2013.

Article in journal

DOI for On a wear test for rock drill inserts

On a wear test for rock drill inserts

Angserud, Jenny; From, Anna; Wallin, Johan; Jacobson, Staffan et al.

2013.

Conference paper

On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)

Norgren, Susanne; Kusoffsky, Alexandra

Part of International journal of refractory metals & hard materials, p. 24-26, 2013.

Article in journal

DOI for On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)

Performance of DLC coatings in heated commercial engine oil

Forsberg, Peter; Gustavsson, Fredrik; Renman, Viktor; Hieke, André et al.

Part of Wear, p. 211-222, 2013.

Article in journal

DOI for Performance of DLC coatings in heated commercial engine oil

Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

Olander, Petra; Hollman, Patrik; Jacobson, Staffan

2013.

Conference paper

Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

Olander, Petra; Hollman, Patrik; Jacobson, Staffan

Part of Wear, p. 1345-1350, 2013.

Article in journal

DOI for Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field

Solution-based synthesis of AgI coatings for low-friction applications

Sundberg, Jill; Mao, Fang; Andersson, Anna M.; Wiklund, Urban et al.

Part of Journal of Materials Science, p. 2236-2244, 2013.

Article in journal

DOI for Solution-based synthesis of AgI coatings for low-friction applications

Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

Pettersson, Maria; Berlind, Torun; Schmidt, Susann; Jacobson, Staffan et al.

Part of Surface & Coatings Technology, p. 827-834, 2013.

Article in journal

DOI for Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

The asymmetrical friction mechanism that puts the curl in the curling stone

Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

Part of Wear, p. 583-589, 2013.

Article in journal

The asymmetrical friction mechanism that puts the curl in the curling stone

Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

2013.

Conference paper

The asymmetrical friction mechanism that puts the curl in the curling stone

Nyberg, Harald; Alfredsson, Sara; Hogmark, Sture; Jacobson, Staffan

Part of Wear, p. 583-589, 2013.

Article in journal

DOI for The asymmetrical friction mechanism that puts the curl in the curling stone

Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2013.

Conference paper

Tribochemically active Ti-C-S coatings

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

2013.

Conference paper

Tribochemically Active Ti–C–S Nanocomposite Coatings

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

Part of Materials Research Letters, p. 148-155, 2013.

Article in journal

DOI for Tribochemically Active Ti–C–S Nanocomposite Coatings Download full text (pdf) of Tribochemically Active Ti–C–S Nanocomposite Coatings

Tribochemically active Ti-C-S nanocomposites – a new concept for self-lubricating coatings

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Kádas, Krisztina et al.

2013.

Conference paper

Tribology is just another word for extreme conditions: Invited Keynote

Jacobson, Staffan

2013.

Conference paper

Ultra-low friction of W-S-N solid lubricant coating

Gustavsson, Fredrik; Jacobson, Staffan; Cavaleiro, Albano; Polcar, Tomas

Part of Surface & Coatings Technology, p. 541-548, 2013.

Article in journal

DOI for Ultra-low friction of W-S-N solid lubricant coating

Understanding field experience of contact performance from lab fretting tests of model contacts

Andersson, Gunnar; Öberg, Åke; Grandin, Martina; Kassman Rudolphi, Åsa

Part of Proc. IEEE 59th HOLM Conference on Electrical Contacts, p. 207-214, 2013.

Conference paper

Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses

Pettersson, Maria; Thersleff, Thomas; Jacobson, Staffan; Larsson, Sune et al.

2013.

Conference paper

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

2012.

Conference paper

Adhesion properties in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Wiklund, Urban

2012.

Conference paper

ANS Triboconditioning: In-Manufacture Running-in Process for Improving Tribological Properties of Mechanical Parts made of Steel and Cast Iron

Zhmud, Boris; Åkerlund, Eva-Brita; Jacobson, Staffan; Hardell, Jens et al.

Part of 18th International Colloquium Tribology – Industrial and Automotive Lubrication, Ostfildern, Germany, 2012.

Conference paper

Calculated trajectories of curling stones sliding under asymmetrical friction

Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

Conference paper

Coatings and surface treatments: interaction with lubricants

Jacobson, Staffan

Part of The Handbook of Lubrication and Tribology, p. 41-1-41-13, 2012.

Chapter in book

Comparison of anodised aluminium surfaces from four fabrication methods

Riddar, Frida; Hogmark, Sture; Kassman Rudolphi, Åsa

Part of Journal of Materials Processing Technology, p. 2272-2281, 2012.

Article in journal

DOI for Comparison of anodised aluminium surfaces from four fabrication methods

Complex frictional analysis of self-lubricant W-S-C/Cr coating

Polcar, Tomas; Gustavsson, Fredrik; Thersleff, Thomas; Jacobson, Staffan et al.

Part of Faraday discussions, p. 383-401, 2012.

Article in journal

DOI for Complex frictional analysis of self-lubricant W-S-C/Cr coating

Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.

Conference paper

Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

Part of Tribology International, p. 153-160, 2012.

Article in journal

DOI for Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

Olofsson, Johanna; Grehk, T. Mikael; Berlind, Torun; Persson, Cecilia et al.

Part of Biomatter, p. 94-102, 2012.

Article in journal

DOI for Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

Evaluation of TiB₂ coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Surface Engineering, p. 517-525, 2012.

Article in journal

DOI for Evaluation of TiB₂ coatings in cold forming of aluminium

Fabrication and evaluation of Si_xN_y coatings for total joint replacements

Olofsson, Johanna; Pettersson, Maria; Teuscher, Nico; Heilmann, Andreas et al.

Part of Journal of materials science. Materials in medicine, p. 1879-1889, 2012.

Article in journal

DOI for Fabrication and evaluation of Si_xN_y coatings for total joint replacements

Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact

Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Jacobson, Staffan

Part of Tribology - Materials, Surfaces & Interfaces, p. 102-108, 2012.

Article in journal

DOI for Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact

Friction and wear behaviour of low-friction coatings in conventional and alternative fuels

Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

Part of Tribology International, p. 22-28, 2012.

Article in journal

DOI for Friction and wear behaviour of low-friction coatings in conventional and alternative fuels

Heavy duty exhaust valve simulation and evaluation in a test rig

Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

Part of Nordtrib, Trondheim, 2012, 2012.

Conference paper

How tribological propertiesof DLC coatings vary in different engine oils at elevated temperature

Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

Part of Nordtrib, Trondheim, Norge, 2012.

Conference paper

Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

Part of Tribology International, p. 9-18, 2012.

Article in journal

DOI for Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Nordtrib, Trondheim, Norway, 2012, 2012.

Conference paper

Mechanical properties of Si_xN_y- and Si_xC_yN_z-coatings for total joint replacements

Pettersson, Maria; Tkachenko, Sergey; Schmidt, Susann; Jacobson, Staffan et al.

Part of 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012., 2012.

Conference paper

Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Wear, p. 49-60, 2012.

Article in journal

DOI for Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

Mechanisms of transfer of aluminium to PVD-coated forming tools

Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology letters, p. 299-312, 2012.

Article in journal

DOI for Mechanisms of transfer of aluminium to PVD-coated forming tools

Mechanisms responsible for compositional variations of films sputtered from a WS2 target

Särhammar, Erik; Sundberg, Jill; Nyberg, Harald; Kubart, Tomas et al.

Part of International Conference on Metallurgical Coatings and Thin films (ICMCTF) 23-27/04 2012, San Diego, abstract number:428, 2012.

Conference paper

Micro scratch testing of silicon nitride and silicon carbon nitride coatings

Tkachenko, Sergey; Pettersson, Maria; Schmidt, Susann; Berlind, Torun et al.

Part of Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012., 2012.

Conference paper

Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries

Andre, Benny; Hollman, Patrik; Wiklund, Urban

Part of Tribologia, p. 22-31, 2012.

Article in journal

New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Wear, p. 61-73, 2012.

Article in journal

DOI for New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

On the residual stresses vs. hardness of tribological surfaces

Hogmark, Sture; Smid, Michal; Coronel, Ernesto; Wiklund, Urban

2012.

Conference paper

Heinrichs, Jannica

On Transfer of Work Material to Tools

2012.

Doctoral thesis, comprehensive summary

Download full text (pdf) of Heinrichs, Jannica

On wear resistance of tool steel

Broqvist, Natalia; Hogmark, Sture; Medvedeva, A.; Gunnarsson, S.

Part of Journal of Manufacturing Processes, p. 195-198, 2012.

Article in journal

DOI for On wear resistance of tool steel

Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 2325-2329, 2012.

Article in journal

DOI for Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

Protective tribofilm build up from exhaust residues on the surface on  exhaust valve systems in a test rig

Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

Part of Nordtrib, Trondheim, Norway, 2012, 2012.

Conference paper

Smart DLC coating top coating for reduction of counter surface wear in fuel contact

Gustavsson, Fredrik; Forsberg, Peter; Renman, Viktor; Hieke, André et al.

Part of Faraday Discussion 156: Tribology, 2012.

Conference paper

Sulfur-doping of nc-TiC/a-C films by reactive sputtering

Sundberg, Jill; Nyberg, Harald; Särhammar, Erik; Nyberg, Tomas et al.

Part of Thirteenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012, 2012.

Conference paper

Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study

Olander, Petra; Hollman, Patrik; Jacobson, Staffan

Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, Trondheim, June 12-15 2012, 2012.

Conference paper

Download full text (pdf) of Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study

The defect landscape and self-ordering mechanism of solid lubricant coatings exhibiting superlubricity

Thersleff, Thomas; Gustavsson, Fredrik; Pohl, Darius; Rellinghaus, Bernd et al.

Part of Proceedings of the 15th European Microscopy Congress, p. 493-494, 2012.

Conference paper

The influence of grain size and surface treatment of the tribofilm formation on alumina components

Olofsson, Johanna; Jacobson, Staffan

Part of Wear, p. 17-24, 2012.

Article in journal

DOI for The influence of grain size and surface treatment of the tribofilm formation on alumina components

Tribofilm formation of lightly loaded self mated alumina contacts

Olofsson, Johanna; Bexell, Ulf; Jacobson, Staffan

Part of Wear, p. 39-45, 2012.

Article in journal

DOI for Tribofilm formation of lightly loaded self mated alumina contacts

Tribological requirements for selection of new materials for electrical connectors

Kassman Rudolphi, Åsa; Wiklund, Urban

Part of NordTrib 2012, Trondheim, Norge, 2012.

Conference paper

Tribology of selenium-based solid lubricants alloyed with carbon

Gustavsson, Fredrik; Polcar, Tomas; Jacobson, Staffan; Cavaleiro, Albano

Part of Advances in lubrication, Costa Rica, 2012.

Conference paper

Wear study of coated heavy duty exhaust valve systems in a experimental test rig

Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

2012.

Conference paper

Wear study of coated heavy duty exhaust valve systems in a experimental test rig

Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

Part of SAE International technical papers, 2012.

Article in journal

DOI for Wear study of coated heavy duty exhaust valve systems in a experimental test rig

Assessing the mechanical and electrical properties of aluminium oxide on aluminium using nanoindentation and nanoscratching

Malmros, Martina; Olsson, Mikael; Bexell, Ulf; Wiklund, Urban

2011.

Conference paper

Ball-on-disc testing of SiN_x coatings for hip joint implants

Pettersson, Maria; Olofsson, Johanna; Teuscher, Nico; Jacobson, Staffan et al.

2011.

Conference paper

Design of carbide-based nanocomposite thin films by selective alloying

Jansson, Ulf; Lewin, Erik; Råsander, Mikael; Eriksson, Olle et al.

Part of Surface & Coatings Technology, p. 583-590, 2011.

Article in journal

DOI for Design of carbide-based nanocomposite thin films by selective alloying

DLC coatings for fule injection components to minimize wear and friction in various fuels

Hieke, André; Håkansson, Greger; Gustavsson, Fredrik; Forsberg, Peter et al.

2011.

Conference paper

Evaluation of TiB2 coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

2011.

Conference paper

Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

Wiklund, Urban; Rubino, Stefano; Kádas, Krisztina; Skorodumova, Natalia V. et al.

Part of Acta Materialia, p. 68-74, 2011.

Article in journal

DOI for Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

First-principles atomistic study of surfaces of Fe-rich Fe-Cr

Ropo, M; Kokko, K; Airiskallio, E; Punkkinen, M P J et al.

Part of Journal of Physics, p. 265004-, 2011.

Article in journal

DOI for First-principles atomistic study of surfaces of Fe-rich Fe-Cr

Friction and contact resistance of nanocomposite Ti-Ni-C coatings

André, Benny; Lewin, Erik; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 555-566, 2011.

Article in journal

DOI for Friction and contact resistance of nanocomposite Ti-Ni-C coatings

Hard low friction WSN coating deposited by magnetron sputtering: Sliding in dry nitrogen

Gustavsson, Fredrik; Polcar, Tomas; Cavaleiro, Albano; Jacobson, Staffan

2011.

Conference paper

Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications

Malmros, Martina; Wiklund, Urban

2011.

Conference paper

Nanoindentation on micro pillars for determination of residual stress conditions of PVD coatings

André, Benny; Wiklund, Urban

2011.

Conference paper

On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

Part of Wear, p. 204-2057, 2011.

Article in journal

DOI for On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

2011.

Conference paper

Quaternary W-S-C-Ti films for tribological applications

Sundberg, Jill; Särhammar, Erik; Nyberg, Harald; Kubart, Tomas et al.

2011.

Conference paper

Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry

Gerth, Julia; Larsson, Mats; Urban, Wiklund

Part of Tribologia, p. 37-50, 2011.

Article in journal

The brake pad surface – dynamic materials formation, disintegration and regeneration at the nanoscale

Jacobson, Staffan

2011.

Conference paper

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Staffan, Jacobson

2011.

Conference paper

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 2517-2524, 2011.

Article in journal

DOI for The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Tribological conditions of curling - the ultimate friction sport?

Alfredsson, Sara; Nyberg, Harald; Hogmark, Sture; Jacobson, Staffan

Part of 18th International Conference on Wear of Materials, Philadelphia, USA, April 3-7, 2011, 2011.

Conference paper

Wear mechanism study of exhaust valve system in modern heavy duty combustion engines

Forsberg, Peter; Hollman, Patrik; Jacobson, Staffan

Part of Wear, p. 2477-2484, 2011.

Article in journal

DOI for Wear mechanism study of exhaust valve system in modern heavy duty combustion engines

Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement

Olofsson, Johanna; Grehk, Mikael; Persson, Cecilia; Jacobson, Staffan et al.

Part of Asiatrib 2010, 2010.

Conference paper

Characterization and tribological properties of low-friction tribofilms formed on WS2 coatings in dry sliding: nanoparticle based coatings compared to sputtered coatings

Gustavsson, Fredrik; Jacobson, Staffan

Part of ASIATRIB, 2010.

Conference paper

Conductive nanocomposite ceramics as tribological and electrical contact materials

Öberg, Å.; Kassman, Åsa; André, Benny; Wiklund, Urban et al.

Part of European Physical Journal, p. 22902-, 2010.

Article in journal

DOI for Conductive nanocomposite ceramics as tribological and electrical contact materials

Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

Wilhelmsson, Ola; Bijelovic, Stojanka; Lindquist, Mattias; André, Benny et al.

Part of Thin Solid Films, p. 2607-2616, 2010.

Article in journal

DOI for Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

2010.

Conference paper

Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

Part of 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010, 2010.

Conference paper

Frequency- and contact load dependency for pneumatic clutch actuators

Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of Proceedings of NORDTRIB 2010 : 14th Nordic Symposium on Tribology, 2010.

Conference paper

Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions

André, Benny; Wiklund, Urban

2010.

Conference paper

Friction behaviour of Fullerene Like WS2 nanoparticles in a Ni-matrix compared to PVD WS2 and MoS2 coatings

Gustavsson, Fredrik; Jacobson, Staffan

Part of ICMCTF, 2010.

Conference paper

Influence from PVD coatings on galling tendency in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2010.

Conference paper

Influence on surface micro topography of HSS surfaces from argon ion etch cleaning

Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

2010.

Conference paper

Investigations of the friction behaviour and surface modifications for low-friction coatings in traditional and new alternative fuels

Gustavsson, Fredrik; Forsberg, Peter; Jacobson, Staffan

Part of NordTrib 2010, 2010.

Conference paper

Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 3606-3613, 2010.

Article in journal

DOI for Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Nanocomposite Coatings for Contact Brush Applications

Malmros, Martina; Wiklund, Urban

Part of Proceedings of the 4th International Tribology Congress, ASIATRIB2010, 2010.

Conference paper

On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings

Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

Part of Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen, 2010.

Conference paper

Resistance to abrasive wear – fundamental and practical aspects: Keynote Lecture

Jacobson, Staffan

2010.

Conference paper

Synthesis, structure and properties of Ni-alloyed TiC_x-based thin films

Lewin, Erik; André, Benny; Urbonaite, Sigita; Wiklund, Urban et al.

Part of Journal of Materials Chemistry, p. 5950-5960, 2010.

Article in journal

DOI for Synthesis, structure and properties of Ni-alloyed TiC_x-based thin films

The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium

Heinrichs, Jannica; Jacobson, Staffan

2010.

Conference paper

The Uppsala Load Scanner –Second generation

Forsberg, Peter; Nyberg, Harald; Jacobson, Staffan; Hollman, Patrik et al.

Part of Nordtrib 2010, Storforsen, Sweden, 2010.

Conference paper

Tribofilms: On the crucial importance of tribologically induced surface modifications

Jacobson, Staffan; Hogmark, Sture

Part of Recent Developments in Wear Prevention, Friction and Lubrication, p. 197-225, 2010.

Chapter in book

Download full text (pdf) of Tribofilms: On the crucial importance of tribologically induced surface modifications

Tribological behaviour for low-friction coatings at conformal contact pressure in traditional and new-alternative fuels

Forsberg, Peter; Gustavsson, Fredrik; Jacobson, Staffan

Part of ASIATRIB 2010,  PERTH, WESTERN AUSTRALIA, 5-9 DECEMBER 2010, 2010.

Conference paper

Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings

Iwai, Yoshiro; Matsubara, Tohru; Hirai, Yuichi; Hogmark, Sture

Part of Lubrication Science, p. 213-226, 2009.

Article in journal

DOI for Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings

EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool

Rubino, Stefano; Hanson, Magnus; Hogmark, Sture; Leifer, Klaus

Part of EDGE 2009 - International EELS Workshop, Banff, Canada 17-22 May 2009, 2009.

Conference paper

Download full text (pdf) of EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool

Evaluation of Wear Properties of DLC Films by a Micro Slurry-Jet Erosion (MSE) Test

Iwai, Y; Miyajima, T; Mizuno, A; Asami, Y et al.

Part of WOM 2009 in Las Vegas 19-23/4 2009, 2009.

Conference paper

Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

Lewin, Erik; Olsson, Erik; André, Benny; Joelsson, Torbjörn et al.

Part of Plasma Processes and Polymers, p. S928-S934, 2009.

Article in journal

DOI for Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

Influence from humidity on the alumina friction drive system of an ultrasonic motor

Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

Part of Tribology International, p. 1467-1477, 2009.

Article in journal

DOI for Influence from humidity on the alumina friction drive system of an ultrasonic motor

Influence from tool roughness on the risk of work material adhesion and transfer

Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

Part of Materials and Manufacturing Processes, p. 913-917, 2009.

Article in journal

DOI for Influence from tool roughness on the risk of work material adhesion and transfer

Influence of aluminium pre-treatment on galling in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2009.

Conference paper

Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

Lindgren, M; Åstrand, M; Wiklund, Urban; Engqvist, Håkan

Part of Journal of materials science. Materials in medicine, p. 1401-1408, 2009.

Article in journal

DOI for Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

p. 87-92 2009.

Conference paper

Laboratory test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 2278-2286, 2009.

Article in journal

DOI for Laboratory test simulation of galling in cold forming of aluminium

Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings

Iwai, Y.; Miyajima, T.; Mizuno, A.; Honda, T. et al.

Part of Wear, p. 264-269, 2009.

Article in journal

DOI for Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings

On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

2009.

Conference paper

On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

Olofsson, Johanna; Lindberg, Fredrik; Johansson, Stefan; Jacobson, Staffan

Part of Wear, p. 1295-1300, 2009.

Article in journal

DOI for On the role of tribofilm formation on the alumina drive components of an ultrasonic motor

On the Vital Importance of Dynamics and Modifications in tribological Surfaces-Illustrating Examples from Practical Applications

Jacobson, Staffan; Hogmark, Sture

2009.

Conference paper

On the wear of PVD-coated HSS hobs in dry gear cutting

Gerth, Julia; Larsson, Mats; Wiklund, Urban; Riddar, Frida et al.

Part of Wear, p. 444-452, 2009.

Article in journal

DOI for On the wear of PVD-coated HSS hobs in dry gear cutting

Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles

André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

2009.

Conference paper

Potential of a new low-friction coating based on inorganic fullerens: comparison with state-of-the-art PVD coatings

André, Benny; Gustavsson, Fredrik; Svahn, Fredrik; Jacobson, Staffan

p. 400- 2009.

Conference paper

Properties affecting machinability of hot work tool steels

Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.

Part of Tool Steels - Deciding Factor in Worldwide Production, 2009.

Conference paper

Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

Part of Wear, p. 2257-2268, 2009.

Article in journal

DOI for Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

Holmberg, Kenneth; Ronkainen, Helena; Laukkanen, Anssi; Wallin, Kim et al.

Part of Wear, p. 2142-2156, 2009.

Article in journal

DOI for Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

Surface modifications in tribological contacts

Jacobson, Staffan; Hogmark, Sture

Part of Wear, p. 370-378, 2009.

Article in journal

DOI for Surface modifications in tribological contacts

The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

Coronel, E; Wiklund, Urban; Olsson, E

Part of Thin Solid Films, p. 71-76, 2009.

Article in journal

DOI for The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

The effect of grain size on the tribofilm formation on the alumina friction drive system of an ultrasonic motor

Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

Part of ECOTRIB 09, p. 965-970, 2009.

Conference paper

The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

Nilsson, D; Stavlid, N; Lindquist, M; Hogmark, Sture et al.

Part of Surface and Coatings Technology, p. 2989-2994, 2009.

Article in journal

DOI for The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

The Role of Surface Treatment in the Tribofilm Formation on Alumina Friction Drive Components

Olofsson, Johanna; Jacobson, Staffan

Part of World tribology congress 2009, Kyoto, 2009.

Conference paper

Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 379-387, 2009.

Article in journal

DOI for Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 988-994, 2009.

Article in journal

DOI for Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

Wear of an AlCrN coated HSS Hob in Dry Gear Cutting

Gerth, Julia; Wiklund, Urban

Part of HSS FORUM - Smart Solutions for the Future of Metal Cutting, 2009.

Conference paper

Wear study of field worn clutch actuators and evaluation of a model test

Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of Wear, p. 2269-2272, 2009.

Article in journal

DOI for Wear study of field worn clutch actuators and evaluation of a model test

Wear tests of pneumatic cylinders of aluminium from permanent mould casting and extrusion

Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of Proceedings of the 2nd European Conference on Tribology (ECOTRIB 2009), 2009.

Conference paper

A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons

Beste, Ulrik; Jacobson, Staffan

Part of Wear, p. 1129-1141, 2008.

Article in journal

DOI for A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons

Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

Casas, B.; Wiklund, Urban; Lanes, L.M.; Hogmark, Sture

Part of Wear, p. 490-496, 2008.

Article in journal

DOI for Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

Att skriva tekniska och vetenskapliga rapporter – Korta tips, regler och exempel för effektiv kommunikation i skrift

Jacobson, Staffan

2008.

Report

Avoiding slip accidents – about the friction in walking on hard floorings

Jacobson, Staffan; Åstrand, Mikael

2008.

Conference paper

Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy

Duda, Laurent; Andersson, Joakim; Schmitt, Thorsten; Jacobson, Staffan

Part of Tribology letters, p. 31-34, 2008.

Article in journal

DOI for Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy

Comparisons between commercial low-friction coatings and emerging coating concepts in ball-on-disc tests – coefficient of friction, tribofilm formation and surface damage

André, Benny; Jacobson, Staffan

2008.

Conference paper

Conductive nanocomposite ceramics as tribological and electrical contact materials

Öberg, Åke; Kassman Rudolphi, Åsa; Wiklund, Urban; André, Benny et al.

Part of International Conference on Electrical Contacts, ICEC 2008, 2008.

Conference paper

Designed high-friction surfaces: influence of roughness and deformation of the counter surface

Hammerström, Lars; Jacobson, Staffan

Part of Wear, p. 807-814, 2008.

Article in journal

DOI for Designed high-friction surfaces: influence of roughness and deformation of the counter surface

Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory

Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, Rui et al.

Part of Journal of Applied Physics, p. 083505-, 2008.

Article in journal

DOI for Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory

Hydroxylapatite growth on single-crystal rutile substrates

Lindberg, Fredrik; Heinrichs, Jannica; Ericson, Fredric; Thomsen, Peter et al.

Part of Biomaterials, p. 3317-3323, 2008.

Article in journal

DOI for Hydroxylapatite growth on single-crystal rutile substrates

In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Heinrichs, Jannica; Jarmar, Tobias; Rooth, Mårten; Engqvist, Håkan

Part of BIOCERAMICS, VOL 20, PTS 1 AND 2, p. 689-692, 2008.

Conference paper

DOI for In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Influence from tool roughness on the risk of work material adhesion and transfer

Hanson, Magnus; Hogmark, Sture; Jacobson, Staffan

2008.

Conference paper

Influences from humidity on the friction drive system of a piezoelectric motor

Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

2008.

Conference paper

Ingenjörsutbildningar vid Uppsala universitet. Studenter granskar några utbildningar ur genusperspektiv

Kassman Rudolphi, Åsa; Orvehed, Maria; Woldegiorgis, Sara

2008.

Report

Download full text (pdf) of Ingenjörsutbildningar vid Uppsala universitet. Studenter granskar några utbildningar ur genusperspektiv

Lab test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of NordTrib 2008, 2008.

Conference paper

On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel

Hanson, Magnus; Stavlid, Nils; Coronel, Ernesto; Hogmark, Sture

Part of Wear, p. 781-787, 2008.

Article in journal

DOI for On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel

On adhesion of work material in metal forming

Hanson, Magnus; Hogmark, Sture; Coronel, Ernesto; Persson, Daniel H.E.

Part of International journal of microstructure and materials properties, p. 401-412, 2008.

Article in journal

DOI for On adhesion of work material in metal forming

On the mechanisms of friction between skis and snow and implications on how to prepare the skis for optimum glide

Hogmark, Sture; Sturesson, Peter; Jacobson, Staffan

2008.

Conference paper

On the relation between composition, oxidation and machinability of tool steels

Broqvist, Natalia; Hogmark, Sture; Gunnarsson, S.; Björk, T. et al.

2008.

Conference paper

On the wear of pneumatic clutch actuators

Riddar, Frida; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of Proceedings of NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 2008.

Conference paper

Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

Part of Trends in Biomaterials & Artificial Organs, p. 104-110, 2008.

Article in journal

Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test

Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

Part of Proceedings of the International conference Nordtrib 2008, 2008.

Conference paper

Residual stresses in TiN, DLC and MoS₂ coated surfaces with regard to their tribological fracture behaviour

Holmberg, Kenneth; Ronkainen, H; Laukkanen, A; Wallin, K et al.

Part of Proceedings of the International conference Nordtrib 2008:, 2008.

Conference paper

Rock penetration into cemented carbide drill buttons during rock drilling

Beste, Ulrik; Jacobson, Staffan; Hogmark, Sture

Part of Wear, p. 1142-1151, 2008.

Article in journal

DOI for Rock penetration into cemented carbide drill buttons during rock drilling

Targeting micro-sectioning: A technique to study subsurface features in worn specimens

Beste, Ulrik; Jacobson, Staffan

Part of Wear, p. 1152-1156, 2008.

Article in journal

DOI for Targeting micro-sectioning: A technique to study subsurface features in worn specimens

Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts

André, Benny; Lewin, Erik; Lindquist, Mattias; Jansson, Ulf et al.

2008.

Conference paper

Analysis of the tribofilm formation on the friction drive surfaces of a piezoelectric motor

Olofsson, Johanna; Johansson, Stefan; Jacobson, Staffan

Part of ASME/STLE International Joint Tribology Conference, Parts A and B, p. 871-872, 2007.

Conference paper

Comparison between two test methods for avaluation of forming tool materials

Hanson, Magnus; Gåård, A.; Hogmark, Sture; Bergström, J.

2007.

Conference paper

Comparison of two test methods for evaluation of forming tool materials

Hanson, Magnus; Gåård, A.; Krakhmalev, P.; Hogmark, Sture et al.

Part of Tribotest, p. 147-158, 2007.

Article in journal

DOI for Comparison of two test methods for evaluation of forming tool materials

Design of Nanocomposite Low-Friction Coatings

Wilhelmsson, Ola; Råsander, Mikael; Carlsson, Mattias; Lewin, Erik et al.

Part of Advanced Functional Materials, p. 1611-1616, 2007.

Article in journal

DOI for Design of Nanocomposite Low-Friction Coatings

Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, Mattias et al.

Part of E-MRS spring meeting 2007 (Strasbourg 28 maj - 1 juni), 2007.

Conference paper

Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, M et al.

2007.

Conference paper

On adhesion in tribological contacts-Causes and consequences

Hogmark, Sture; Jacobson, Staffan; Coronel, E.

Part of Tribologia, p. 3-16, 2007.

Article in journal

Predicting hardness of covalent/ionic solid solution from first-principles theory

Hu, Qing-Miao; Kádas, Krisztina; Hogmark, Sture; Yang, R. et al.

Part of Applied Physics Letters, p. 121918-, 2007.

Article in journal

DOI for Predicting hardness of covalent/ionic solid solution from first-principles theory

Surface modifications in tribological contacts

Jacobsson, Staffan; Hogmark, Sture

p. 599-612 2007.

Conference paper

Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors

Pettersson, Ulrika; Jacobson, Staffan

Part of Tribology International, p. 355-359, 2007.

Article in journal

DOI for Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors

Textured surfaces in sliding boundary lubricated surfaces – mechanisms, possibilities and limitations

Pettersson, Ulrika; Jacobson, Staffan

Part of Tribology - Materials, Surfaces & Interfaces, p. 181-189, 2007.

Article in journal

The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

Gerth, Julia; Wiklund, Urban

Part of Wear, p. 885-892, 2007.

Article in journal

DOI for The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

Theoretical evidence of the compositional threshold behavior of FeCr surfaces

Ropo, M.; Kokko, K.; Punkkinen, M.P.J.; Hogmark, Sture et al.

Part of Physical Review B. Condensed Matter and Materials Physics, p. 220401-1-220401-4, 2007.

Article in journal

DOI for Theoretical evidence of the compositional threshold behavior of FeCr surfaces

Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings

Lindquist, M; Wilhelmsson, O; Jansson, U; Wiklund, Urban

2007.

Conference paper

Tribological surfaces of a pneumatic clutch actuator

Riddar, Frida; Kassman Rudolphi, Åsa; Jacobson, Staffan; Hogmark, Sture et al.

Part of Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, p. 955-967, 2007.

Conference paper

Tribology of nanocomposite materials in electrical contacts

Andre, Benny; Kassman, Åsa; Jansson, U.

2007.

Conference paper

Wear propagation of PVD AlCrN coated HSS hob in dry gear hobbing

Gerth, Julia; Larsson, Mats; Wiklund, Urban

2007.

Conference paper

An atomistic approach to the initiation mechanism of galling

Vitos, Levente; Larsson, Karin; Johansson, Börje; Hanson, Magnus et al.

Part of Computational materials science, p. 193-197, 2006.

Article in journal

DOI for An atomistic approach to the initiation mechanism of galling

Coating materials optimised for lubricated contacts

Jacobson, Staffan; Hogmark, Sture

2006.

Conference paper

Combiantion of DLC coatings and EP additivesfor improveds tribological behaviour of boundary lubricated surfaces

Podgornik, B.; Hren, D.; Vizintin, J.; Jacobson, Staffan et al.

Part of Wear, p. 32-, 2006.

Article in journal

Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces

Podgornik, B; Hren, D; Vizintin, J; Jacobsson, Staffan et al.

Part of Wear, p. 32-40, 2006.

Article in journal

Designed High-friction surfaces - influence of roughness and deformation of the sountersurface

Hammerström, Lars; Jacobsson, Staffan

2006.

Conference paper

Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

Part of Advances in Science and Technology, p. 122-131, 2006.

Article in journal

DOI for Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

Part of Advances in Science and Technology, p. 2750-, 2006.

Conference paper

Editorial

Hogmark, Sture; Jacobson, Staffan

Part of Wear, p. 1-, 2006.

Article in journal

Geometrically Defined All-Diamond Abrasive Surfaces for Pad Conditioning in Chemical Mechanical Polishing

Forsberg, Markus; Andersson, Joakim; Jacobson, Staffan

Part of J Electrochem Soc, p. G1-G6, 2006.

Article in journal

HiMeC - A Swedish Programme for research and Doctoral Studies

Andersson, S; Larsson, R; Jacobson, Staffan; Höglund, E

2006.

Conference paper

Improvement in galling performance through surface engineering

Podgornik, B.; Vizintin, J.; Hogmark, Sture

Part of Surface Engineering, p. 235-238, 2006.

Article in journal

DOI for Improvement in galling performance through surface engineering

Mechanisms of Work Material Adhesion in Tooling Operations Revealed by TEM

Coronel, Ernesto; Hanson, Magnus; Leifer, Klaus; Hogmark, Sture

2006.

Conference paper

Nature of tribological interface of automotive brakes in Advanced in asbestos-free friction composites

Jacobson, Staffan

2006.

Conference paper

On the effect of surface topography and humidity on lubricated running-in of a carbon based coating

Svahn, Fredrik; Kassman-Rudolphi, Åsa; Hogmark, Sture

Part of Wear, p. 1237-1246, 2006.

Article in journal

DOI for On the effect of surface topography and humidity on lubricated running-in of a carbon based coating

On the possiblities of designing static contact interfaces with strong grip

Jacobson, Staffan

2006.

Conference paper

Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding

Persson, Daniel H. E.; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

Part of Wear, p. 96-100, 2006.

Article in journal

DOI for Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding

Surface modification of brake discs to reduce squeal prob-lems

Hammerström, Lars; Jacobson, Staffan

Part of Wear, p. 53-57, 2006.

Article in journal

Surface modification of brake discs to reduce squeal problems

Hammerström, Lars; Jacobson, Staffan

Part of Wear, p. 53-57, 2006.

Article in journal

Tribological texturing of steel surfaces with a novel diamond embossing tool technique

Pettersson, Ulrika; Jacobson, Staffan

Part of Tribology International, p. 695-700, 2006.

Article in journal

DOI for Tribological texturing of steel surfaces with a novel diamond embossing tool technique

Wear induced material modification of cemented carbide rock drills

Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

Part of Int. Journal of Refractory Metals and Hard Materials, p. 168-176, 2006.

Article in journal

Wear induced material modifications of cemented carbide rock drill buttons

Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 168-176, 2006.

Article in journal

DOI for Wear induced material modifications of cemented carbide rock drill buttons

A geometrically defined all-diamond pad conditioner

Andersson, Joakim; Forsberg, Markus; Hollman, Patrik; Jacobson, Staffan

Part of World Tribology Congress III, Washington., 2005.

Conference paper

Effect of surface textures in highly loaded grease lubricated reciprocating sliding contacts

Jacobson, Staffan; Kälvesten, Ellen; Pettersson, Ulrika

Part of World Tribology Congress III, Washington., 2005.

Conference paper

High Resolution Characterisation of Friction Induced Deformation using the FIB

Persson, Daniel; Hammerström, Lars; Jacobson, Staffan; Hogmark, Sture

Part of International Tribology Conference, Kobe., 2005.

Conference paper

Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces

Podgornik, Bojan; Jacobson, Staffan; Hogmark, Sture

Part of Surface and Coatings Technology, p. 357-366, 2005.

Article in journal

Possibilities for Optimisation of Low friction coatings

Hogmark, Sture; Svahn, Fredrik; Stavlid, Nils; Wiklund, Urban et al.

Part of International Tribology Conference, Kobe., 2005.

Conference paper

Reduction of Brake Squeal using Brake Disc Surface Modifications

Hammerström, Lars; Jacobson, Staffan

Part of International Tribology Conference, Kobe., 2005.

Conference paper

Therma fatigue cracking of surface engineered hot work tool steel

Persson, A; Hogmark, Sture; Bergström, J

Part of Surface and Coatings Technology, p. 216-227, 2005.

Article in journal

Tribological conditions for successful solid lubrication

Jacobson, Staffan; Hogmark, Sture

Part of International Tribology Conference, Kobe., 2005.

Conference paper

Vibration-induced deterioration of tin-coated conncetors studied by using a force controlled fretting bench-test

Hammam, Tag; Per, Lundström; Kassman Rudolphi, Åsa

Part of Proc. 51st IEEE Holm Conf. on Electrical Contacts, p. 97-106, 2005.

Conference paper

Wear mechanisms of HSS cutting tools

Hogmark, Sture; Olsson, Mikael

Part of SME (Society of Manufacturing Engineeres) Technical Paper, p. 1-14, 2005.

Article in journal

Wear mechanisms of HSS metal cutting tools

Hogmark, Sture; Olsson, Mikael

Part of Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal Cutting, February 2-3, 2005, Aachen, Germany., 2005.

Conference paper

A comparative evaluation method for low friction coatings in dry sliding thrust bearings

Carlsson, Mattias; Wiklund, Urban

Part of Tribologia, p. 27-36, 2004.

Article in journal

A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

Nilsson, Daniel; Wiklund, Urban

Part of Thin Solid Films, p. 10-15, 2004.

Article in journal

DOI for A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces

Podgornik, B; Hogmark, Sture; Pezdirnik, J

Part of Wear, p. 843-851, 2004.

Article in journal

Contact pressure induced shifts in the friction behaviour of laser processed stellite

Persson, Daniel; Coronel, Ernesto; Jacobson, Staffan; Hogmark, Sture

p. 340- 2004.

Conference paper

Failure modes in field tested brass die casting dies,

Persson, A; Hogmark, Sture; Bergström, J

Part of Journal of Materials Processing Technology, p. 108-118, 2004.

Article in journal

Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated contacts

Pettersson, Ulrika; Jacobson, Staffan

Part of Tribology letters, p. 553-559, 2004.

Article in journal

DOI for Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated contacts

Friction Mechanisms of Coated Tribological Components

Hogmark, Sture

Part of Proceedings of the VTI conference Challenges in Surface Engineering, Ghent, Belgium,, 2004.

Conference paper

Influence of surface roughness and coating type on galling properties of forming tools

Hogmark, Sture; Sandberg,, Odd

Part of Int. Conf. on Recent Advances in Manufacture & Use of Tools and Dies, and Stamping of Steel Sheets, Olofström, Sweden, 2004.

Conference paper

Influence of surface roughness and coating type on the galling properties of coated forming tool steel

Podgornik,, B; Sandberg, O; Hogmark, Sture

Part of Surface and Coatings Technology, p. 338-348, 2004.

Article in journal

Interactive Tribological Coatings

Hogmark, Sture; Nilsson, Daniel; Svahn, Fredrik; Ignberg, L

Part of COST 532 Conference in Ghent, p. 68-75, 2004.

Conference paper

Micro-scratch evaluation of rock types - a means to comprehend rock drill wear

Beste, Ulrik; Lundvall, A; Jacobson, Staffan

Part of Trib. Int, p. 203-210, 2004.

Article in journal

Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

Longtin, R; Fauteux, C; Coronel, Ernesto; Wiklund, Urban et al.

Part of Appl. Phys. A, p. 573-577, 2004.

Article in journal

DOI for Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

Penetrated rock as a weakening mechanism in cemented carbide rock drill wear.

Beste, Ulrik; Jacobson, Staffan

Part of Nordtrib 2004, Tromsö, Norway, p. 627–636-, 2004.

Conference paper

Phase transformations in CVD diamond wear tracks revealed by NEXAFS mapping

Andersson, Joakim; Schmitt, Thorsten; Duda, Laurent; Jacobson, Staffan

Part of Nordtrib 2004, Tromsö, Norway, 2004.

Conference paper

Scratch Testing of a Dental Restorative Material based on Calcium Aluminate

Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

Part of Ceramic Engineering and Science Proc, p. 577-, 2004.

Article in journal

Scratch testing of a dental restorative material based on calcium aluminate

Pallas, A.; Engqvist, Håkan; Jacobson, Staffan; Hermansson, Leif

Part of 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Cocoa Beach, 2004.

Conference paper

Sealing to improve the wear characteristics of sprayed alumina through electro-deposited Ni

Westergård, Rickard; Hogmark, Sture

Part of Wear, p. 1153-1162, 2004.

Article in journal

Sealing to improve the wear of properties of plasma sprayed alumina by electro-deposited Ni

Westergård, Richard; Hogmark, Sture

Part of www.sciencedirect.com, 2004.

Article in journal

Simulation and evaluation of thermal fatigue cracking of hot work tool steel

Persson, A; Hogmark, Sture; Bergström, J

Part of International Journal of Fatigue, p. 1095-1107, 2004.

Article in journal

Surface engineering - Which are the gains

Hogmark, Sture

Part of VTI conference Challenges in Surface Engineering, Ghent,, 2004.

Conference paper

Surface modification of brake discs to reduce squealing problems."

Hammerström, Lars; Jacobson, Staffan

Part of Nordtrib 2004, Tromsö, Norway, 2004.

Conference paper

Temperature profiles and conditions for thermal fatigue cracking in brass die casting dies

Persson, A; Hogmark, Sture; Bergström, J

Part of Journal of Materials Processing Technology, p. 228-236, 2004.

Article in journal

The effect of embossed surface textures on the friction and wear in a boundary lubricated contact

Pettersson, Ulrika; Jacobson, Staffan

Part of Nordtrib 2004, Tromsö, Norway, 2004.

Conference paper

Tribological behaviour of WC/C coatings operating under different lubrication regimes.

Podgornik, B; Vizintin, J; Jacobson, Staffan; Hogmark, Sture

Part of Surface and Coatings Technology, p. 558-565., 2004.

Article in journal

Tribological properties of sprayed alumina coatings sealed by electro-deposition of Cu

Westergård, Rickard; Hogmark, S; Vuoristo, P

Part of Wear, p. 1163-1175, 2004.

Article in journal

Wear and friction properties of coatings for forming tools

Podgornik, B.; Hogmark, Sture; Sandberg, O

Part of Strojniski vestnik – Journal of Mechanical Engineering, p. 156-, 2004.

Article in journal

Wear induced material modification of cemented carbide rock drills

Beste, Ulrik; Coronel, Ernesto; Jacobson, Staffan

Part of Conf on Hard Materials, Puert Rico, 2004.

Conference paper

Wear mechanisms of HSS metal cutting tools

Hogmark, Sture; Olsson, M

Part of Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal, 2004.

Conference paper

Biographical item: "Olof Vingsbo - Obituary" in Tribology International, Vol 36, Issue 7, pp 493-494

Hogmark, Sture

2003.

Other

DOI for Biographical item: "Olof Vingsbo - Obituary" in Tribology International, Vol 36, Issue 7, pp 493-494

Influence of surface texture on boundary lubricated sliding contacts

Pettersson, Ulrika; Jacobson, Staffan

Part of Tribology International, p. 857-864, 2003.

Article in journal

DOI for Influence of surface texture on boundary lubricated sliding contacts

Low-friction carbon-rich carbide coatings deposited by co-sputtering

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003.

Article in journal

null

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003.

Article in journal

null

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003.

Article in journal

null

Westergård, Richard; Svahn, Fredrik; Wiklund, Urban

Part of Surface and Coatings Technology, p. 14-22, 2003.

Article in journal

Novel load-carrying layers to support low-friction PVD coatings

Westergård, Rickard; Svahn, Fredrik; Wiklund, Urban

Part of Surface and Coatings Technology, p. 14-22, 2003.

Article in journal

The influence of surface roughness on friction and wear of machine element coatings

Svahn, Fredrik; Kassman Rudolphi, Åsa; Wallén, Erik

Part of Wear, p. 1092-1098, 2003.

Article in journal

DOI for The influence of surface roughness on friction and wear of machine element coatings

Design of low weight components: a theoretical approach

Wänstrand, Olle; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of Surface Engineering, p. 93-97, 2002.

Article in journal

DOI for Design of low weight components: a theoretical approach

Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

Gunnars, J; Wiklund, U

Part of Materials Science and Engineering A, p. 7-21, 2002.

Article in journal

DOI for Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

Effects of substrate bias polarity on tribological a-C:Ta coatings

Nilsson, D; Coronel, E; Wiklund, U

Part of AUSTRIB ´02, Perth, 2002.

Conference paper

Investigations on electrical contacts subjected to fretting motion

van, Dijk P; Kassman Rudolphi, Åsa; Klaffke, D

Part of ICEC - 21st Int. Conf. on Electrical Contacts, Zurich, 2002.

Conference paper

Load-carrying capacity of Ni-plated media in spherical indentation: experimental and theoretical results

Wänstrand, Olle; Schwarzer, N.; Chudoba, T.; Kassman Rudolphi, Åsa

Part of Surface Engineering, p. 98-104, 2002.

Article in journal

DOI for Load-carrying capacity of Ni-plated media in spherical indentation: experimental and theoretical results

Sliding wear and rolling contact fatigue of rough low friction coatings

Svahn, F; Kassman Rudolphi, Åsa

Part of Frontiers in Tribology, 2002.

Conference paper

Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

Crossley, A; Johnston, C; Hutchings, I M; Myhra, S et al.

Part of Thin Solid Films, p. 224-230, 2002.

Article in journal

DOI for Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

The influence of surface roughness on friction and wear of machine element coatings

Svahn, Fredrik; Kassman Rudplphi, Åsa; Wallén, Erik

2002.

Conference paper

Tribological properties of brush plated coatings

Svärd, L; Kassman Rudolphi, Åsa; Hogmark, Sture

Part of 2nd ASIATRIB International Conference, Seoul, October 21-23, 2002: Proceedings, p. 171-, 2002.

Conference paper

Friction, wear and electric properties of lubricated tin-coated contact terminals

Hammam, T; Kassman, Rudolphi Åsa; Ignberg, L

Part of Proc. 34th Annual Connector & Interconnection Technology Symp., Anaheim, CA, USA, Oct. 1-3, 2001.

Conference paper

Mechanical and tribological requirements and evaluation of coating composites

Hogmark, S; Jacobson, S; Larsson, M; Wiklund, Urban

Part of Modern Tribology Handbook, p. 931-960, 2001.

Chapter in book

An experimental method for evaluation of the load carrying capacity of coated aluminium: the influence of coating stiffness, hardness and thickness

Wänstrand, Olle; Larsson, M; Kassman Rudolphi, Åsa

Part of Surface & Coatings Technology, p. 107-113, 2000.

Article in journal

DOI for An experimental method for evaluation of the load carrying capacity of coated aluminium: the influence of coating stiffness, hardness and thickness

Carbide-metal phase interpenetrated double skeleton microstructures

Zheng, Jie; Ekström, Thommy C.; Axén, Niklas; Kassman Rudolphi, Åsa et al.

Part of 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures, 2000.

Conference paper

DOI for Carbide-metal phase interpenetrated double skeleton microstructures

Evaluation of a flexible physical vapor deposited TiC-C coating system

Wiklund, U; Nordin, M; Wänstrand, O; Larsson, M

Part of Surface & Coatings Technology, p. 154-161, 2000.

Article in journal

DOI for Evaluation of a flexible physical vapor deposited TiC-C coating system

Fretting degradation of PVD coated copper and aluminium

Kassman Rudolphi, Åsa

Part of NORDTRIB 2000, p. 481-, 2000.

Conference paper

Fretting testing of electrical contacts at small displacement amplitudes: Experiences from a BriteEuram project

Kassman, Rudolphi Åsa

Part of Proc. 20. International Conference on Electrical Contacts (ICEC), Stockholm, 06/2000, p. 471-476, 2000.

Conference paper

Mapping of mechanical properties of WC-Co using nanoindentation

Engqvist, Håkan; Wiklund, Urban

Part of Tribology letters, p. 147-152, 2000.

Article in journal

DOI for Mapping of mechanical properties of WC-Co using nanoindentation

Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

Wänstrand, Olle; Larsson, M.; Kassman Rudolphi, Åsa

Part of Tribology International, p. 737-742, 2000.

Article in journal

DOI for Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

Designed abrasive diamond surfaces

Gåhlin, Rickard; Bjorkman, Henrik; Rangsten, Pelle; Jacobson, Staffan

Part of WEAR, p. 387-394, 1999.

Article in journal

Influence of lamellae thickness on the corrosion behaviour of multilayered PVD TiN CrN coatings

Nordin, M; Herranen, Merja; Hogmark, Sture

Part of THIN SOLID FILMS, p. 202-209, 1999.

Article in journal

Influence of residual stresses on fracture and delamination of thin hard coatings

Wiklund, U; Gunnars, J; Hogmark, S

Part of Wear, p. 262-269, 1999.

Article in journal

DOI for Influence of residual stresses on fracture and delamination of thin hard coatings

The multilayer effect in abrasion: optimising the combination of hard and tough phases

Berger, M; Wiklund, U; Eriksson, M; Engqvist, H et al.

Part of Surface & Coatings Technology, p. 1138-1144, 1999.

Article in journal

DOI for The multilayer effect in abrasion: optimising the combination of hard and tough phases

Corrosion behaviour of Ti/TiN multilayer coated tool steel

Herranen, Merja; Wiklund, U; Carlsson, Jan-Otto; Hogmark, S

Part of SURFACE & COATINGS TECHNOLOGY, p. 191-196, 1998.

Article in journal

Cracking resistance of thin hard coatings estimated by four-point bending

Wiklund, U; Bromark, M; Larsson, M; Hedenqvist, P et al.

Part of Surface and coatings technology, p. 57-63, 1997.

Article in journal

DOI for Cracking resistance of thin hard coatings estimated by four-point bending

On the use of ceramic PVD coatings to replace metallic coatings in electrical contacts.

Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 270-278, 1997.

Article in journal

Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere

Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Tribology International, p. 165-175, 1997.

Article in journal

DOI for Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere

The contact resistance of rolling silver coated copper contacts

Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Proc. 43rd IEEE Holm Conf. on Electrical Contacts, p. 33-40, 1997.

Conference paper

Tribological evaluation of thermally activated CVD diamond-like carbon (DLC) coatings

Hollman, P; Hedenqvist, P; Hogmark, S; Stenberg, G et al.

Part of SURFACE & COATINGS TECHNOLOGY, p. 230-235, 1997.

Article in journal

Gross plastic fretting - examination of the gross weld regime.

Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Wear, p. 255-264, 1996.

Article in journal

DOI for Gross plastic fretting - examination of the gross weld regime.

Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.

Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Wear, p. 244-254, 1996.

Article in journal

DOI for Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.

The role of gross plastic fretting in serviceability and deterioration of power contacts

Kassman Rudolphi, Åsa; Jacobson, Staffan

p. 352-362 1996.

Conference paper

DOI for The role of gross plastic fretting in serviceability and deterioration of power contacts

Tribologi i elektriska kontakter: en problempresentation

Kassman Rudolphi, Åsa

Part of Tribologia, p. 16-36, 1996.

Article in journal

Tribology of electrical contacts

deterioration of silver coated copper Kassman Rudolphi, Åsa

Doctoral thesis, comprehensive summary

Conduction through corrosion films on silver plated copper in power contacts

Kassman Rudolphi, Åsa; Imrell, T; Björkman, C; Jacobson, S

Part of Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts, p. 124-134, 1995.

Conference paper

DOI for Conduction through corrosion films on silver plated copper in power contacts

The composition of the silver coating strongly influences the stability of stationary electrical contacts

Imrell, T; Sjövall, R; Kassman, Åsa

1994.

Conference paper

Surface damage, adhesion and contact resistance of siler coated plated copper contacts subjected to fretting motion

Kassman, Åsa; Jacobson, Staffan

Part of Wear, p. 227-230, 1993.

Article in journal

DOI for Surface damage, adhesion and contact resistance of siler coated plated copper contacts subjected to fretting motion

A new test method for the intrinsic abrasion resistance of thin coatings

Kassman, Åsa; Jacobson, Staffan; Erickson, Lynn; Hedenqvist, Per et al.

Part of Surface & Coatings Technology, p. 75-84, 1991.

Article in journal

DOI for A new test method for the intrinsic abrasion resistance of thin coatings

How TiN coatings improve the performance of high speed steel cutting tools.

Hedenqvist, Per; Olsson, Mikael; Kassman, Åsa; Wallen, Per et al.

Part of Surface & Coatings Technology, p. 243-256, 1990.

Article in journal

DOI for How TiN coatings improve the performance of high speed steel cutting tools.