PUBLICATIONS
Below you can find our 50 most recent publications, followed by Licentiate & PhD theses
-
Article in journal
Confocal imaging dataset to assess endothelial cell orientation during extreme glucose conditions
Part of Scientific Data, 2022.
-
Article in journal
An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization
Part of Materials, 2022.
-
Article in journal
Experimental Characterization and Mathematical Modeling of the Adsorption of Proteins and Cells on Biomimetic Hydroxyapatite
Part of ACS Omega, p. 908-920, 2022.
-
Article in journal
Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty
Part of Journal of Functional Biomaterials, 2022.
-
Article in journal
Self-Assembly of Nanodiamonds and Plasmonic Nanoparticles for Nanoscopy
Part of Biosensors, 2022.
-
Article in journal
Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants
Part of Materials Today Bio, 2022.
-
Article in journal
Additively manufactured mesh-type titanium structures for cranial implants: E-PBF vs. L-PBF
Part of Materials & design, 2021.
-
Article in journal
Functional properties of low-modulus PMMA bone cements containing linoleic acid
Part of Journal of Functional Biomaterials, 2021.
-
Article in journal
Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds
Part of Materials science & engineering. C, biomimetic materials, sensors and systems, 2021.
-
Article in journal
Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures
Part of Journal of The Mechanical Behavior of Biomedical Materials, 2021.
-
Article in journal
A microfluidics-based method for culturing osteoblasts on biomimetic hydroxyapatite
Part of Acta Biomaterialia, p. 327-337, 2021.
-
Article in journal
The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures
Part of Materials, 2021.
-
Article in journal
Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation
Part of Acta Biomaterialia, p. 502-513, 2021.
-
Article, review/survey
A practical guide for evaluating the osteoimmunomodulatory properties of biomaterials
Part of Acta Biomaterialia, p. 115-137, 2021.
-
Article in journal
Brain microvasculature endothelial cell orientation on micropatterned hydrogels is affected by glucose level variations
Part of Scientific Reports, 2021.
-
Article in journal
Fabrication and characterisation of a silicon-borosilicate glass microfluidic device for synchrotron-based hard X-ray spectroscopy studies
Part of RSC Advances, p. 29859-29869, 2021.
-
Article in journal
A microscopy-compatible temperature regulation system for single-cell phenotype analysis - demonstrated by thermoresponse mapping of microalgae
Part of Lab on a Chip, p. 1694-1705, 2021.
-
Article, review/survey
In-Line Analysis of Organ-on-Chip Systems with Sensors: Integration, Fabrication, Challenges, and Potential
Part of ACS Biomaterials Science & Engineering, p. 2926-2948, 2021.
-
Article in journal
Binary acoustic trapping in a glass capillary
Part of Journal of Physics D, 2021.
-
Article in journal
Effect of the Addition Frequency of 5-Azacytidine in Both Micro- and Macroscale Cultures
Part of Cellular and Molecular Bioengineering, p. 121-130, 2021.
-
Article in journal
Acoustic focusing of beads and cells in hydrogel droplets
Part of Scientific Reports, 2021.
-
Article in journal
Organ-on-a-chip technology: a novel approach to investigate cardiovascular diseases
Part of Cardiovascular Research, p. 2742-2754, 2021.
-
Article, review/survey
Density and mechanical properties of vertebral trabecular bone-A review
Part of JOR SPINE, 2021.
-
Article in journal
A droplet acoustofluidic platform for time-controlled microbead-based reactions
Part of Biomicrofluidics, 2021.
-
Article in journal
A microfluidic chip carrier including temperature control and perfusion system for long-term cell imaging
Part of HardwareX, p. e00245-, 2021.
-
Article in journal
Fabrication of Silicon Microfluidic Chips for Acoustic Particle Focusing Using Direct Laser Writing
Part of Micromachines, 2020.
-
Article in journal
Development and characterisation of bilayered periosteum-inspired composite membranes based on sodium alginate-hydroxyapatite nanoparticles
Part of Journal of Colloid and Interface Science, p. 408-420, 2020.
-
Article in journal
Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design
Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.
-
Article in journal
The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications
Part of Materials, 2020.
-
Article in journal
PDMS leaching and its implications for on-chip studies focusing on bone regeneration applications
Part of Organs-on-a-Chip, 2020.
-
Article in journal
The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone
Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.
-
Article in journal
Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants
Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.
-
Article in journal
Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential
Part of Journal of Tissue Engineering, 2020.
-
Article in journal
Exploring microfluidics as a tool to evaluate the biological properties of a titanium alloy under dynamic conditions
Part of Biomaterials Science, p. 6309-6321, 2020.
-
Article in journal
Dynamics of DNA Clogging in Hafnium Oxide Nanopores
Part of Journal of Physical Chemistry B, p. 11573-11583, 2020.
-
Article in journal
Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach
Part of Materials, 2020.
-
Article, review/survey
A practical guide to microfabrication and patterning of hydrogels for biomimetic cell culture scaffolds
Part of Organs-on-a-Chip, 2020.
-
Article in journal
A simplified approach to control cell adherence on biologically derived in vitro cell culture scaffolds by direct UV-mediated RGD linkage
Part of Journal of materials science. Materials in medicine, 2020.
-
Article in journal
The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness
Part of Materials, 2019.
-
Article in journal
A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation
Part of International Journal of Solids and Structures, p. 211-227, 2019.
Theses
- Charlotte Skjöldebrand, PhD, 2022 "Silicon nitride based coatings for biomedical implants"
- Ana María Porras Hernández, Licentiate, 2022 "Chemical micropatterning of hyaluronic acid hydrogels for brain endothelial in vitro cell studies"