Publications

  • Wu, Dan; Joffre, Thomas; Öhman, Caroline; Ferguson, Stephen et al.

    A combined experimental and numerical method to estimate the elastic modulus of single trabeculae

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2022.

  • Nilsson Åhman, Hanna; Thorsson, Lena; Mellin, Pelle; Lindwall, Greta et al.

    An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization

    Part of Materials, 2022.

    Open access
  • Lewin, Susanne; Försth, Peter; Persson, Cecilia

    Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty

    Part of Journal of Functional Biomaterials, 2022.

    Open access
  • Skjöldebrand, Charlotte; Tipper, Joanne L; Hatto, Peter; Bryant, Michael et al.

    Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

    Part of Materials Today Bio, 2022.

  • Lewin, Susanne; Fleps, Ingmar; Åberg, Jonas; Ferguson, Stephen J. et al.

    Additively manufactured mesh-type titanium structures for cranial implants: E-PBF vs. L-PBF

    Part of Materials & design, 2021.

    Open access
  • Robo, Céline; Wenner, David; Ubhayasekera, S. J. Kumari A.; Hilborn, Jöns et al.

    Functional properties of low-modulus PMMA bone cements containing linoleic acid

    Part of Journal of Functional Biomaterials, 2021.

    Open access
  • Diez-Escudero, Anna; Andersson, Brittmarie; Persson, Cecilia; Hailer, Nils

    Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds

    Part of Materials science & engineering. C, biomimetic materials, sensors and systems, 2021.

    Open access
  • Robo, Céline; Öhman, Caroline; Persson, Cecilia

    Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2021.

    Open access
  • Grzeszczak, Ana; Lewin, Susanne; Eriksson, Olle; Kreuger, Johan et al.

    The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures

    Part of Materials, 2021.

    Open access
  • Lewin, Susanne; Linder, Lars Kihlstrom Burenstam; Birgersson, Ulrik; Gallinetti, Sara et al.

    Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation

    Part of Acta Biomaterialia, p. 502-513, 2021.

    Open access
  • Dong, Zhiyun; Wu, Dan; Engqvist, Håkan; Luo, Jun et al.

    Silk fibroin hydrogels induced and reinforced by acidic calcium phosphate: A simple way of producing bioactive and drug-loadable composites for biomedical applications

    Part of International Journal of Biological Macromolecules, p. 433-440, 2021.

  • Öhman, Caroline; Holub, Ondrej; Wu, Dan; Hall, Richard M. et al.

    Density and mechanical properties of vertebral trabecular bone-A review

    Part of JOR SPINE, 2021.

    Open access
  • Yang, Jiaojiao; Chen, Song; Luo, Jun; Persson, Cecilia et al.

    Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds

    Part of ACS Applied Materials and Interfaces, p. 7403-7410, 2020.

  • Wu, Dan; Spanou, Andrea; Diez-Escudero, Anna; Persson, Cecilia

    3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.

  • Lewin, Susanne; Åberg, Jonas; Neuhaus, Dominique; Engqvist, Håkan et al.

    Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.

    Open access
  • Filho, Luimar; Schmidt, Susann; Goyenola, Cecilia; Skjöldebrand, Charlotte et al.

    The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications

    Part of Materials, 2020.

    Open access
  • Wu, Dan; Pujari-Palmer, Michael; Bojan, Alicja; Palmquist, Anders et al.

    The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.

    Open access
  • Lewin, Susanne; Fleps, Ingmar; Neuhaus, Dominique; Öhman, Caroline et al.

    Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants

    Part of Journal of The Mechanical Behavior of Biomedical Materials, 2020.

    Open access
  • Diez-Escudero, Anna; Harlin, Hugo; Isaksson, Per; Persson, Cecilia

    Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential

    Part of Journal of Tissue Engineering, 2020.

    Open access
  • Bang, Le T.; Filho, Luimar; Engqvist, Håkan; Xia, Wei et al.

    Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants

    Part of Journal of Biomedical Materials Research. Part B - Applied biomaterials, p. 429-438, 2020.

  • Skjöldebrand, Charlotte; Hulsart Billström, Gry; Engqvist, Håkan; Persson, Cecilia

    Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

    Part of Materials, 2020.

    Open access
  • Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Persson, Cecilia et al.

    The Effect of Al Addition on the Tribological Behavior of Ti-Si-Zr Alloys

    Part of Journal of tribology, 2019.

  • Barba, Albert; Diez-Escudero, Anna; Espanol, Montserrat; Bonany, Mar et al.

    Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters

    Part of ACS Applied Materials and Interfaces, p. 8818-8830, 2019.

  • Luo, Jun; Faivre, Julien; Engqvist, Håkan; Persson, Cecilia

    The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

    Part of Materials, 2019.

    Open access
  • van Dijk, Nico P.; Wu, Dan; Persson, Cecilia; Isaksson, Per

    A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation

    Part of International Journal of Solids and Structures, p. 211-227, 2019.

    Open access
  • Diez-Escudero, Anna; Torreggiani, Elena; Di Pompo, Gemma; Espanol, Montserrat et al.

    Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells

    Part of Journal of Tissue Engineering and Regenerative Medicine, p. 1217-1229, 2019.

  • Rothenbucher, Theresa S. P.; Ledin, Johan; Gibbs, David; Engqvist, Håkan et al.

    Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems

    Part of Acta Biomaterialia, p. 235-243, 2019.

  • Bang, Le Thi; Filho, Luimar; Engqvist, Håkan; Xia, Wei et al.

    Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants

    Part of Journal of Biomedical Materials Research. Part B - Applied biomaterials, 2019.

  • Filho, Luimar; Schmidt, Susann; Leifer, Klaus; Engqvist, Håkan et al.

    Towards Functional Silicon Nitride Coatings for Joint Replacements

    Part of Coatings, 2019.

    Open access
  • Filho, Luimar Correa; Schmidt, Susann; López, Alejandro; Cogrel, Mathilde et al.

    The Effect of Coating Density on Functional Properties of SiNx Coated Implants

    Part of Materials, 2019.

    Open access
  • Pujari-Palmer, Michael; Robo, Céline; Persson, Cecilia; Procter, Philip et al.

    Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 624-633, 2018.

  • Ajaxon, Ingrid; Holmberg, Anders; Öhman, Caroline; Persson, Cecilia

    Fatigue performance of a high-strength, degradable calcium phosphate bone cement

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 46-52, 2018.

    Open access
  • Persson, Johan; Helgason, Benedikt; Engqvist, Håkan; Ferguson, Stephen et al.

    Stiffness and strength of cranioplastic implant systems in comparison to cranial bone

    Part of Journal of Cranio-Maxillofacial Surgery, p. 418-423, 2018.

  • Robo, Céline; Öhman, Caroline; Persson, Cecilia

    Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 70-76, 2018.

  • Robo, Céline; Hulsart Billström, Gry; Nilsson, Malin; Persson, Cecilia

    In vivo response to a low-modulus PMMA bone cement in an ovine model

    Part of Acta Biomaterialia, p. 362-370, 2018.

  • Barba, Albert; Maazouz, Yassine; Diez-Escudero, Anna; Rappe, Katrin et al.

    Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture

    Part of Acta Biomaterialia, p. 135-147, 2018.

  • Díez-Escudero, Anna; Montserrat, Espanol; Bonany, Mar; Lu, Xi et al.

    Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects

    Part of Advanced Healthcare Materials, 2018.

    Open access
  • Luo, Jun; Engqvist, Håkan; Persson, Cecilia

    A ready-to-use acidic, brushite-forming calcium phosphate cement

    Part of Acta Biomaterialia, p. 304-314, 2018.

    Open access
  • Wu, Dan; Isaksson, Per; Ferguson, Stephen; Persson, Cecilia

    Young’s modulus of trabecular bone at the tissue level: A review

    Part of Acta Biomaterialia, p. 1-12, 2018.

    Open access
  • Joffre, Thomas; Isaksson, Per; Procter, Philip; Persson, Cecilia

    Trabecular deformations during screw pull-out: a micro-CT study of lapine bone

    Part of Biomechanics and Modeling in Mechanobiology, p. 1349-1359, 2017.

    Open access
  • Ajaxon, Ingrid; Öhman Mägi, Caroline; Persson, Cecilia

    Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition

    Part of Journal of materials science. Materials in medicine, 2017.

    Open access
  • Ajaxon, Ingrid; Acciaioli, Alice; Lionello, Giacomo; Ginebra, Maria-Pau et al.

    Elastic properties and strain-to-crack-initation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 428-437, 2017.

    Open access
  • Barba, Albert; Diez-Escudero, Anna; Maazouz, Yassine; Rappe, Katrin et al.

    Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture

    Part of ACS Applied Materials and Interfaces, p. 41722-41736, 2017.

  • Shah, Furqan; Lee, Bryan; Tedesco, James; Larsson Wexell, Cecilia et al.

    Micrometre-sized magnesium whitlockite crystals in micropetrosis of bisphosphonate-exposed human alveolar bone

    Part of Nano letters (Print), p. 6210-6216, 2017.

  • Tummala, Gopi Krishna; Joffre, Thomas; Rojas, Ramiro; Persson, Cecilia et al.

    Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues

    Part of Soft Matter, p. 3936-3945, 2017.

    Open access
  • Luo, Jun; Martinez-Casado, Francisco Javier; Balmes, Olivier; Yang, Jiaojiao et al.

    In-situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth

    Part of ACS Applied Materials and Interfaces, p. 36392-36399, 2017.

  • Joffre, Thomas; Segerholm, Kristoffer; Persson, Cecilia; Bardage, Stig L. et al.

    Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography

    Part of Industrial crops and products (Print), p. 43-49, 2017.

  • Gallinetti, Sara; Mestres, Gemma; Canal, Cristina; Persson, Cecilia et al.

    A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

    Part of Journal of The Mechanical Behavior of Biomedical Materials, p. 495-503, 2017.

    Open access
  • Lewin, Susanne; Barba, Albert; Persson, Cecilia; Franch Serracanta, Jordi et al.

    Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM

    Part of Biomedical Materials, 2017.

    Open access
  • Skjöldebrand, Charlotte; Schmidt, Susann; Vuong, Vicky; Pettersson, Maria et al.

    Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements

    Part of Materials, 2017.

    Open access
Last modified: 2021-08-20