Publikationer
-
Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy
Ingår i Materials, 2023.
Artikel i tidskrift
DOI för Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy Ladda ner fulltext (pdf) av Convective Flow Redistribution of Oxygen by Laser Melting of a Zr-Based Amorphous Alloy
-
Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water
Ingår i International journal of refractory metals & hard materials, 2023.
Artikel i tidskrift
DOI för Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water Ladda ner fulltext (pdf) av Electrochemical and passivation behavior of a corrosion-resistant WC-Ni (W) cemented carbide in synthetic mine water
-
Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment
Ingår i Tribology letters, 2023.
Artikel i tidskrift
DOI för Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment Ladda ner fulltext (pdf) av Insights of the Ultralow Wear and Low Friction of Carbon Fiber Reinforced PTFE in Inert Trace Moisture Environment
-
Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test
Ingår i Wear, s. 528-529, 2023.
Artikel i tidskrift
-
Hassila, Carl Johan
Additive Manufacturing of Ni-Fe Superalloys: Exploring the Alloying Envelope and the Impact of Process on Mechanical Properties
2022.
Doktorsavhandling, sammanläggning
-
Holmberg, Anders
Contact fatigue and crack propagation studies of sintered PM steel
2022.
Doktorsavhandling, sammanläggning
-
Crack initiation and early propagation in case hardened sintered PM steels under cyclic load
Ingår i Powder Metallurgy, s. 1-12, 2022.
Artikel i tidskrift
DOI för Crack initiation and early propagation in case hardened sintered PM steels under cyclic load Ladda ner fulltext (pdf) av Crack initiation and early propagation in case hardened sintered PM steels under cyclic load
-
Insights into plastic deformation and binder lamella orientation in hardmetal turning inserts
Ingår i International journal of refractory metals & hard materials, 2022.
Artikel i tidskrift
-
Larsson, Elin
New insights into lubricated tribological contacts
2022.
Doktorsavhandling, sammanläggning
-
Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625
Ingår i Materials & design, 2022.
Artikel i tidskrift
DOI för Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625 Ladda ner fulltext (pdf) av Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625
-
Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process
Ingår i Materials & design, s. 110928-110928, 2022.
Artikel i tidskrift
DOI för Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process Ladda ner fulltext (pdf) av Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process
-
Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting
Ingår i JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, s. 1165-1178, 2022.
Artikel i tidskrift
DOI för Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting Ladda ner fulltext (pdf) av Simulation of phase evolution in a Zr-based glass forming alloy during multiple laser remelting
-
Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights
Ingår i Tribology International, 2022.
Artikel i tidskrift
-
Tribological evaluation of a boric acid fuel additive in various engine fuels
Ingår i Wear, s. 204381-, 2022.
Artikel i tidskrift
DOI för Tribological evaluation of a boric acid fuel additive in various engine fuels Ladda ner fulltext (pdf) av Tribological evaluation of a boric acid fuel additive in various engine fuels
-
Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis
Ingår i Wear, 2022.
Artikel i tidskrift
DOI för Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis Ladda ner fulltext (pdf) av Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part I: Fretting experiments and surface analysis
-
Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model
Ingår i Wear, 2022.
Artikel i tidskrift
DOI för Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model Ladda ner fulltext (pdf) av Unraveling the lubrication mechanisms of lithium complex (LiX)- and polypropylene (PP)- thickened greases in fretting – Part II: Lubrication model
-
Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases
Ingår i Wear, 2021.
Artikel i tidskrift
DOI för Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases Ladda ner fulltext (pdf) av Grease-lubricated tribological contacts-Influence of graphite, graphene oxide and reduced graphene oxide as lubricating additives in lithium complex (LiX)- and polypropylene (PP)-thickened greases
-
Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite
Ingår i Wear, 2021.
Artikel i tidskrift
DOI för Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite Ladda ner fulltext (pdf) av Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite
-
On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals
Ingår i Wear, 2021.
Artikel i tidskrift
DOI för On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals Ladda ner fulltext (pdf) av On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals
-
On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces
Ingår i Tribology - Materials, Surfaces & Interfaces, s. 181-192, 2021.
Artikel i tidskrift
DOI för On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces Ladda ner fulltext (pdf) av On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces
-
Semi in-situ measurement of microstructural changes in PM steel during indentation
Ingår i Euro PM2021 Proceedings, 2021.
Konferensbidrag
-
Towards understanding plastic deformation in hardmetal turning inserts with different binders
Ingår i International journal of refractory metals & hard materials, 2021.
Artikel i tidskrift
-
-
Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper
Ingår i Wear, 2021.
Artikel i tidskrift
DOI för Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper Ladda ner fulltext (pdf) av Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper
-
Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings
Ingår i Applied Sciences, 2020.
Artikel i tidskrift
DOI för Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings Ladda ner fulltext (pdf) av Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings
-
Defibration mechanisms and energy consumption in the grinding zone – a lab scale equipment and method to evaluate groundwood pulping tools
Ingår i Nordic Pulp & Paper Research Journal, s. 25-33, 2020.
Artikel i tidskrift
-
Influence of Nitrogen Content on Microstructure and Mechanical Properties of Laser Powder Bed Fusion Processed Alloy 625
Ingår i World PM 2020, 27/6-1/7 2020, Montreal, Kanada, 2020.
Konferensbidrag
-
Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears
Ingår i Tribology Transactions, s. 1076-1084, 2020.
Artikel i tidskrift
DOI för Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears Ladda ner fulltext (pdf) av Influence of the DIN 3962 Quality Class on the Efficiency in Honed Powder Metal and Wrought Steel Gears
-
Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale
Ingår i Holzforschung, s. 477-487, 2020.
Artikel i tidskrift
-
Tailoring residual stresses in CrNx films on alumina and silicon deposited by high-power impulse magnetron sputtering
Ingår i Surface & Coatings Technology, 2020.
Artikel i tidskrift
DOI för Tailoring residual stresses in CrNx films on alumina and silicon deposited by high-power impulse magnetron sputtering Ladda ner fulltext (pdf) av Tailoring residual stresses in CrNx films on alumina and silicon deposited by high-power impulse magnetron sputtering
-
The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
Ingår i Materials & design, 2020.
Artikel i tidskrift
DOI för The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS Ladda ner fulltext (pdf) av The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
-
Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding
Ingår i Wear, 2020.
Artikel i tidskrift
-
Antibacterial investigation of titanium-copper alloys using luminescent Staphylococcus epidermidis in a direct contact test
Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 707-714, 2019.
Artikel i tidskrift
-
Boundary conditions for simulation of powder bed fusion for metallic glass formation: measurements and calibrations
Ingår i Second International Conference on Simulation for Additive Manufacturing (Sim-AM 2019), s. 51-59, 2019.
Konferensbidrag
-
Cemented carbide wear initiation in sliding contact with iron ore
Ingår i Proceedings of 2nd Sweden-China Symposium on Tribology, 2019.
Konferensbidrag
-
Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal
Ingår i Materials Characterization, 2019.
Artikel i tidskrift
DOI för Deformation induced martensite in a Fe-Ni-Co binder phase of a hardmetal
-
Heldin, Magnus
Designing grinding tools to control and understand fibre release in groundwood pulping
2019.
Doktorsavhandling, sammanläggning
-
Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu
Ingår i Materials, 2019.
Artikel i tidskrift
DOI för Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu Ladda ner fulltext (pdf) av Development of Antibacterial Ti-Cu-x Alloys for Dental Applications: Effects of Ageing for Alloys with Up to 10 wt% Cu
-
Evaluation of well-defined tool surface designs for groundwood pulping
Ingår i BioResources, s. 9575-9587, 2019.
Artikel i tidskrift
DOI för Evaluation of well-defined tool surface designs for groundwood pulping Ladda ner fulltext (pdf) av Evaluation of well-defined tool surface designs for groundwood pulping
-
Experimental study of carbides in the Ti-Cr-C system
Ingår i Journal of Materials Science, s. 12358-12370, 2019.
Artikel i tidskrift
DOI för Experimental study of carbides in the Ti-Cr-C system Ladda ner fulltext (pdf) av Experimental study of carbides in the Ti-Cr-C system
-
Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock
Ingår i International journal of refractory metals & hard materials, 2019.
Artikel i tidskrift
-
Influences of load and temperature on groundwood pulping with well-defined tools
Ingår i Wear, 2019.
Artikel i tidskrift
DOI för Influences of load and temperature on groundwood pulping with well-defined tools Ladda ner fulltext (pdf) av Influences of load and temperature on groundwood pulping with well-defined tools
-
Initiation and propagation of tool wear in turning of titanium alloys –: evaluated in successive sliding wear test
Ingår i Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019.
Konferensbidrag
-
Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact
Ingår i Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019.
Konferensbidrag
-
Toller-Nordström, Lisa
Insights into wear and deformation of alternative binder hardmetals
2019.
Doktorsavhandling, sammanläggning
-
On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale
Ingår i The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019.
Konferensbidrag
-
Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625
Ingår i Wear, s. 1837-1845, 2019.
Artikel i tidskrift
DOI för Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625 Ladda ner fulltext (pdf) av Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625
-
Rolling Fatigue Life of PM Steel: Influence of Sintering Temperature and Powder Particle Size
Ingår i Euro PM 2019 Proceedings, 2019.
Konferensbidrag
-
Rolling fatigue life of PM steel with different porosity and surface finish
Ingår i Wear, s. 454-461, 2019.
Artikel i tidskrift
DOI för Rolling fatigue life of PM steel with different porosity and surface finish Ladda ner fulltext (pdf) av Rolling fatigue life of PM steel with different porosity and surface finish
-
Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites
Ingår i Scripta Materialia, s. 106-109, 2019.
Artikel i tidskrift
DOI för Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites Ladda ner fulltext (pdf) av Very-small angle neutron scattering study on grain coarsening inhibition by V-doping of WC-Co composites
-
Wear mechanisms of tools for exploration drilling
Ingår i Euromat 2019, Stockholm, Sweden, s. 787-, 2019.
Konferensbidrag
-
Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production
Ingår i Wear, s. 96-107, 2019.
Artikel i tidskrift
-
Abrasion resistance of drill bit steels in flowing saltwater
Ingår i 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.
Konferensbidrag
-
Abrasion resistance of new wear resistant AM steels
Ingår i 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.
Konferensbidrag
-
Boric acid as fuel additive - Friction experiments and reflections around its effect on fuel saving
Ingår i Tribology International, s. 302-312, 2018.
Artikel i tidskrift
-
Comparison of test methods estimating the stiffness of ultrathin coatings
Ingår i Journal of Coatings Technology and Research, s. 743-752, 2018.
Artikel i tidskrift
DOI för Comparison of test methods estimating the stiffness of ultrathin coatings Ladda ner fulltext (pdf) av Comparison of test methods estimating the stiffness of ultrathin coatings
-
Fatigue performance of a high-strength, degradable calcium phosphate bone cement
Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 46-52, 2018.
Artikel i tidskrift
DOI för Fatigue performance of a high-strength, degradable calcium phosphate bone cement Ladda ner fulltext (pdf) av Fatigue performance of a high-strength, degradable calcium phosphate bone cement
-
Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid
Ingår i Tribology International, s. 465-473, 2018.
Artikel i tidskrift
-
High resolution STEM investigation of interface layers in cemented carbides
Ingår i International journal of refractory metals & hard materials, s. 135-140, 2018.
Artikel i tidskrift
DOI för High resolution STEM investigation of interface layers in cemented carbides
-
Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact
Ingår i Tribology International, s. 1-9, 2018.
Artikel i tidskrift
-
Influences of grinding surface alignment in groundwood pulping of Norway spruce
Ingår i 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018.
Konferensbidrag
-
Initial surface failure and wear of cemented carbides in sliding contact with different rock types
Ingår i Wear, s. 43-55, 2018.
Artikel i tidskrift
-
On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip
Ingår i International journal of refractory metals & hard materials, s. 141-151, 2018.
Artikel i tidskrift
-
On the dramatic wear protecting effect of tribofilms on wear of combustion engine valves
2018.
Konferensbidrag
-
On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels
Ingår i Tribology letters, 2018.
Artikel i tidskrift
DOI för On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels Ladda ner fulltext (pdf) av On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels
-
Pitfalls in Environmental Endurance Testing of Electrical Connectors-Problem Overview and Discussion
Ingår i Proceedings of 2018 29th International Conference on Electrical Contacts and 64th IEEE Holm Conference on Electrical Contacts, s. 475-482, 2018.
Konferensbidrag
-
Elo, Robin
Protective Tribofilms on Combustion Engine Valves
2018.
Doktorsavhandling, sammanläggning
-
Rolling contact fatigue test performed on additively manufactured inconel 718 produced by selective laser melting
Ingår i 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018.
Konferensbidrag
-
Study of tool wear and chemical interaction during machining of Ti6Al4V
Ingår i International journal of refractory metals & hard materials, s. 253-256, 2018.
Artikel i tidskrift
DOI för Study of tool wear and chemical interaction during machining of Ti6Al4V
-
Surface texturing to promote formation of protective tribofilms on combustion engine valves
Ingår i Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, s. 54-61, 2018.
Artikel i tidskrift
DOI för Surface texturing to promote formation of protective tribofilms on combustion engine valves
-
Tribo-chemical wear testing of rock drill inserts
Ingår i The 18th Nordic Symposium on Tribology - Nordtrib 2018, Uppsala, Sweden, June 18-21, 2018, 2018.
Konferensbidrag
-
Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials
Ingår i Wear, s. 227-235, 2018.
Artikel i tidskrift
-
Toller, Lisa
Alternative binder hardmetals for steel turning
2017.
Licentiatavhandling, sammanläggning
Ladda ner fulltext 1 (pdf) av Toller, Lisa Ladda ner fulltext 2 (pdf) av Toller, Lisa
-
Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning
Ingår i Composites Science And Technology, s. 95-102, 2017.
Artikel i tidskrift
-
Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties
Ingår i Surface & Coatings Technology, s. 80-87, 2017.
Artikel i tidskrift
DOI för Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties
-
Boric acid as a lubricating fuel additive - Simplified lab experiments to understand fuel consumption reduction in field test
Ingår i Wear, s. 822-830, 2017.
Artikel i tidskrift
-
Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact
Ingår i Wear, s. 9-17, 2017.
Artikel i tidskrift
-
Examination of wear damage to rock-mining hardmetal drill bits
Ingår i International journal of refractory metals & hard materials, s. 1-10, 2017.
Artikel i tidskrift
DOI för Examination of wear damage to rock-mining hardmetal drill bits
-
Experimental and theoretical study of the microscopic crater wear mechanism in titanium machining
Ingår i Wear, s. 115-124, 2017.
Artikel i tidskrift
-
-
-
-
Grease lubricated fretting - Influence of base oil viscosity and material combination
2017.
Konferensbidrag
-
-
Grease lubricated fretting of silver coated copper electrical contacts
Ingår i Wear, s. 634-642, 2017.
Artikel i tidskrift
DOI för Grease lubricated fretting of silver coated copper electrical contacts
-
Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test
Ingår i International journal of refractory metals & hard materials, s. 7-13, 2017.
Artikel i tidskrift
-
Investigation of Cemented Carbides with Alternative Binders after CVD Coating
Ingår i International journal of refractory metals & hard materials, s. 225-229, 2017.
Artikel i tidskrift
DOI för Investigation of Cemented Carbides with Alternative Binders after CVD Coating
-
Life time of cemented carbide inserts with Ni-Fe binder in steel turning
Ingår i Wear, s. 1822-1829, 2017.
Artikel i tidskrift
DOI för Life time of cemented carbide inserts with Ni-Fe binder in steel turning
-
-
-
Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling
Ingår i Wear, s. 81-92, 2017.
Artikel i tidskrift
DOI för Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling
-
Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements
Ingår i 21st International Conference on Wear of Materials, Long Beach, March 26-30, 2017.
Konferensbidrag
-
Titanium-Copper alloy as an antibacterial biomaterial
Ingår i Titanium-Copper alloy as an antibacterial biomaterial, 2017.
Konferensbidrag
-
Lind, Jonna
Tribology of polymer composites for elevated temperature applications
2017.
Licentiatavhandling, sammanläggning
-
Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures
Ingår i Wear, s. 1429-1436, 2017.
Artikel i tidskrift
-
Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties
Ingår i ACS Applied Materials and Interfaces, s. 30635-30643, 2016.
Artikel i tidskrift
DOI för Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties Ladda ner fulltext (pdf) av Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties
-
-
-
Deep cryogenic treatment of tool steels
Ingår i Journal of Materials Processing Technology, s. 398-406, 2016.
Artikel i tidskrift
-
Diverse mechanisms of friction induced self-organisation into a low-friction material - An overview of WS2 tribofilm formation
Ingår i Tribology International, s. 340-347, 2016.
Artikel i tidskrift
-
Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools
Ingår i Wear, s. 379-389, 2016.
Artikel i tidskrift
-
Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact
Ingår i Tribology International, s. 337-348, 2016.
Artikel i tidskrift
-
-
Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling
Ingår i Tribology - Materials, Surfaces & Interfaces, s. 107-116, 2016.
Artikel i tidskrift
-
Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool
Ingår i Tribology International, s. 414-424, 2016.
Artikel i tidskrift
-
Initial wear of cemented carbides in sliding contact with different rock types
2016.
Konferensbidrag
-
Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching
Ingår i Nordic Pulp & Paper Research Journal, s. 401-406, 2016.
Artikel i tidskrift
-
Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules
Ingår i Tribology International, s. 141-148, 2016.
Artikel i tidskrift
-
Investigation of material transfer in sliding friction-topography or surface chemistry?
Ingår i Tribology International, s. 213-223, 2016.
Artikel i tidskrift
DOI för Investigation of material transfer in sliding friction-topography or surface chemistry? Ladda ner fulltext (pdf) av Investigation of material transfer in sliding friction-topography or surface chemistry?
-
-
Micrometre compressions to facilitate controlled wear in groundwood pulping
Ingår i 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June, 2016.
Konferensbidrag
-
-
-
Reply to a Comment on "Calculated Trajectories of Curling Stones under Assymetrical Friction: Validation of Published Models"
Ingår i Tribology letters, 2016.
Artikel i tidskrift
-
The influence of porosity on the fatigue properties of brushite cement
Ingår i Biomaterials for tissue engineering models, 2016.
Konferensbidrag
-
Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires
Ingår i Wear, s. 138-147, 2016.
Artikel i tidskrift
-
A High-Resolution TEM/EELS Study of the Effect of Doping Elements on the Sliding Mechanisms of Sputtered WS2 Coatings
Ingår i Tribology Transactions, s. 113-118, 2015.
Artikel i tidskrift
-
A labscale test equipment ot study the tool surface influence in pressure groundwood pulping
Ingår i 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16, 2015.
Konferensbidrag
-
Bone response to a novel Ti–Ta–Nb–Zr alloy
Ingår i Acta Biomaterialia, s. 165-175, 2015.
Artikel i tidskrift
-
Bone response to a novel Ti-Ta-Nb-Zr alloy
Ingår i Acta Biomaterialia, s. 165-175, 2015.
Artikel i tidskrift
-
Cemented carbides based on WC pre-alloyed with Cr or Ta
Ingår i International journal of refractory metals & hard materials, s. 36-41, 2015.
Artikel i tidskrift
DOI för Cemented carbides based on WC pre-alloyed with Cr or Ta
-
Composition And Structure Of Bimodal WC-Co Materials Related To Mechanical Properties And Abrasive Wear
Ingår i M2D2015, s. 655-664, 2015.
Konferensbidrag
-
-
Designed tools for controlling the defibration mechanisms in the pressure groundwood process
Ingår i International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20, 2015.
Konferensbidrag
-
-
Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines
Ingår i Wear, s. 193-198, 2015.
Artikel i tidskrift
DOI för Formation and breakdown of oil residue tribofilms protecting the valves of diesel engines
-
Friction and wear of PA66-PPA composites sliding against anodized aluminium cylinders
2015.
Konferensbidrag
-
Friction and wear studies of some PEEK materials
Ingår i Tribologia - Finnish Journal of Tribology, s. 20-28, 2015.
Artikel i tidskrift
-
Graphene as a lubricant on Ag for electrical contact applications
Ingår i Journal of Materials Science, s. 6518-6525, 2015.
Artikel i tidskrift
DOI för Graphene as a lubricant on Ag for electrical contact applications Ladda ner fulltext (pdf) av Graphene as a lubricant on Ag for electrical contact applications
-
Impact of fracture toughness on surface properties of PVD coated cold work tool steel
Ingår i Surface & Coatings Technology, s. 144-150, 2015.
Artikel i tidskrift
DOI för Impact of fracture toughness on surface properties of PVD coated cold work tool steel
-
Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock
Ingår i International journal of refractory metals & hard materials, s. 104-113, 2015.
Artikel i tidskrift
-
-
INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?
2015.
Konferensbidrag
-
-
Mechanisms behind the promising tribological performance of a boric acid based lubricant additive
Ingår i Proceedings of the 42th Leeds-Lyon Symposium on Tribology, 2015.
Konferensbidrag
-
Progress in the development of the neutron flux monitoring system of the French GF:N-IV SFR: simulations and experimental validations.
Ingår i 2015 4Th International Conference On Advancements In Nuclear Instrumentation Measurement Methods And Their Applications (Animma), 2015.
Konferensbidrag
-
Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms
Ingår i Wear, s. 42-48, 2015.
Artikel i tidskrift
DOI för Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms Ladda ner fulltext (pdf) av Scuffing resistance testing of piston ring materials for marine two-stroke diesel engines and mapping of the operating mechanisms
-
-
Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition
Ingår i Wear, s. 210-221, 2015.
Artikel i tidskrift
-
Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon
Ingår i Wear, s. 9-18, 2015.
Artikel i tidskrift
DOI för Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon Ladda ner fulltext (pdf) av Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon
-
The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools
Ingår i Wear, s. 13-22, 2015.
Artikel i tidskrift
DOI för The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools Ladda ner fulltext (pdf) av The effect of inclusion composition on tool wear in hard part turning using PCBN cutting tools
-
Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system
Ingår i International journal of refractory metals & hard materials, s. 257-262, 2015.
Artikel i tidskrift
-
Thermodynamic calculations and experimental verification in the WC-Co-Cr cemented carbide system (Reprint of Int. Journal of Refractory Metals and Hard Materials vol 48, pg 257-262, 2015)
Ingår i International journal of refractory metals & hard materials, s. 400-405, 2015.
Artikel i tidskrift
-
Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application
Ingår i Surface & Coatings Technology, s. 210-218, 2015.
Artikel i tidskrift
DOI för Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application
-
-
A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring
Ingår i Proceedings of the 27th International Conference on Electrical Contacts, s. 237-243, 2014.
Konferensbidrag
-
Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel
Ingår i Journal of Materials Processing Technology, s. 1467-1481, 2014.
Artikel i tidskrift
-
Comparison of friction performance of four anodised aluminium surfaces for use in a clutch actuator
Ingår i Wear, s. 227-233, 2014.
Artikel i tidskrift
-
-
Effect of PTFE on the tribological behaviour of PPS with glass fiber
Ingår i 1st International conference on polymer tribology (PolyTrib), 2014.
Konferensbidrag
-
Experimental Determination of the Solubility of Co in the Cr-Based Carbides Cr23C6, Cr7C3, and Cr3C2
Ingår i Metallurgical and Materials Transactions. A, s. 4820-4828, 2014.
Artikel i tidskrift
-
Formation and degradation of protective tribofilms on diesel engine valve surfaces
2014.
Konferensbidrag
-
Friction and wear studies of some PEEK materials
Ingår i 16th Nordic Symposium on Tribology (NORDTRIB), 2014.
Konferensbidrag
-
Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications
Ingår i Surface & Coatings Technology, s. 326-334, 2014.
Artikel i tidskrift
DOI för Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications Ladda ner fulltext (pdf) av Growth and characterization of chromium carbide films deposited by high rate reactive magnetron sputtering for electrical contact applications
-
Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings
Ingår i Surface & Coatings Technology, s. 86-94, 2014.
Artikel i tidskrift
DOI för Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings Ladda ner fulltext (pdf) av Influence of composition, structure and testing atmosphere on the tribological performance of W-S-N coatings
-
Initiation of wood defibration, tribology at the fiber level
Ingår i Nordtrib, Aarhus, Denmark, June 10-13, 2014.
Konferensbidrag
-
Lubricants: Introduction to properties and performance
John Wiley & Sons, 2014.
Bok
DOI för Lubricants: Introduction to properties and performance
-
Mechanisms for compositional variations of coatings sputtered from a WS2 target
Ingår i Surface & Coatings Technology, s. 186-190, 2014.
Artikel i tidskrift
DOI för Mechanisms for compositional variations of coatings sputtered from a WS2 target
-
Microstructure, grain size distribution and grain shape in WC-Co alloys sintered at different carbon activities
Ingår i International journal of refractory metals & hard materials, s. 205-211, 2014.
Artikel i tidskrift
-
Morphology and composition of tribofilms deposited using a tribochemical burnishing technique
Ingår i Tribology - Materials, Surfaces & Interfaces, s. 14-20, 2014.
Artikel i tidskrift
-
On the sulphuric acid corrosion in large 2-stroke marine diesel engines
Ingår i Tribocorrosion 2014, 9-11 April 2014, University of Strathclyde, Glasgow, 2014.
Konferensbidrag
-
Quantification of Combustion Valve Sealing Interface Sliding - A Novel Experimental Technique and Simulations
Ingår i Tribology International, s. 150-155, 2014.
Artikel i tidskrift
-
Scratch testing for mimicking the early stage of wood defibration
Ingår i Asiatrib, Agra, India, February 17-20, 2014.
Konferensbidrag
-
Testing scuffing resistance of materials for marine 2-stroke engines: Difficulties with lab scale testing of a complex phenomenon
Ingår i Proceedings of 16th Nordic Symposium on Tribology, 2014.
Konferensbidrag
-
-
The effect of lubrication on the friction performance in pneumatic clutch actuators
Ingår i Wear, s. 166-173, 2014.
Artikel i tidskrift
DOI för The effect of lubrication on the friction performance in pneumatic clutch actuators
-
The importance of oil and particle flow for exhaust valve wear - An experimental study
Ingår i Tribology International, s. 176-183, 2014.
Artikel i tidskrift
DOI för The importance of oil and particle flow for exhaust valve wear - An experimental study
-
-
Tribochemical formation of sulphide tribofilms from a Ti-C-S coating sliding against different counter surfaces
Ingår i Tribology letters, s. 563-572, 2014.
Artikel i tidskrift
-
Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications
Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 61-72, 2014.
Artikel i tidskrift
DOI för Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications
-
Wear mechanism differences of intake valves within heavy duty combustion engines
2014.
Konferensbidrag
-
Wear mechanism study of intake valve system in modern heavy duty combustion engines
2014.
Konferensbidrag
-
A theoretical study of possible point defects incorporated into alpha-alumina deposited by chemical vapor deposition
Ingår i Theoretical Chemistry accounts, s. 1433-, 2013.
Artikel i tidskrift
-
-
Calculated Trajectories of Curling Stones Sliding Under Asymmetrical Friction: Validation of Published Models
Ingår i Tribology letters, s. 379-385, 2013.
Artikel i tidskrift
-
Comparison and analysis of protective tribofilms found on heavy duty exhaust valves from field service and made in test rig
Ingår i Wear, s. 1351-1359, 2013.
Artikel i tidskrift
-
Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings
Ingår i Surface & Coatings Technology, s. 48-54, 2013.
Artikel i tidskrift
DOI för Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings Ladda ner fulltext (pdf) av Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings
-
Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings
Ingår i 19th International Conference on Wear of Materials 2013; 14-18 April 2013; Portland, OR, USA, 2013.
Konferensbidrag
-
Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings
Ingår i Wear, s. 987-997, 2013.
Artikel i tidskrift
DOI för Extreme friction reductions during inital running-in of W-S-C-Ti low-friction coatings
-
Friction, wear and surface damage mechanisms of pneumatic clutch actuators
Ingår i Wear, s. 36-44, 2013.
Artikel i tidskrift
DOI för Friction, wear and surface damage mechanisms of pneumatic clutch actuators
-
Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite
Ingår i Wear, s. 1481-1491, 2013.
Artikel i tidskrift
-
Frictional behavior of self-adaptive nanostructural Mo-Se-C coatings in different sliding conditions
Ingår i Wear, s. 286-296, 2013.
Artikel i tidskrift
-
Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings
Ingår i Tribology International, s. 55-64, 2013.
Artikel i tidskrift
-
Influence of Ti addition on the structure and properties of low-friction W–S–C coatings
Ingår i Surface & Coatings Technology, s. 340-348, 2013.
Artikel i tidskrift
DOI för Influence of Ti addition on the structure and properties of low-friction W–S–C coatings
-
Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM
Ingår i Tribology letters, s. 431-438, 2013.
Artikel i tidskrift
-
Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements
Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 41-47, 2013.
Artikel i tidskrift
-
Nanoparticle based and sputtered WS2 low-friction coatings - Differences and similarities with respect to friction mechanisms and tribofilm formation
Ingår i Surface & Coatings Technology, s. 616-626, 2013.
Artikel i tidskrift
-
-
-
On the solubility of chromium in the cubic carbide and M7C3 carbide in the WC-Co-Cr-Me systems (Me = Ti, Nb, Ta and Zr)
Ingår i International journal of refractory metals & hard materials, s. 24-26, 2013.
Artikel i tidskrift
-
Performance of DLC coatings in heated commercial engine oil
Ingår i Wear, s. 211-222, 2013.
Artikel i tidskrift
DOI för Performance of DLC coatings in heated commercial engine oil
-
Piston ring and cylinder liner wear aggravation caused by transition to greener ship transports: Comparison of samples from test rig and field
Ingår i Wear, s. 1345-1350, 2013.
Artikel i tidskrift
-
Solution-based synthesis of AgI coatings for low-friction applications
Ingår i Journal of Materials Science, s. 2236-2244, 2013.
Artikel i tidskrift
DOI för Solution-based synthesis of AgI coatings for low-friction applications
-
Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements
Ingår i Surface & Coatings Technology, s. 827-834, 2013.
Artikel i tidskrift
-
The asymmetrical friction mechanism that puts the curl in the curling stone
Ingår i Wear, s. 583-589, 2013.
Artikel i tidskrift
-
-
The asymmetrical friction mechanism that puts the curl in the curling stone
Ingår i Wear, s. 583-589, 2013.
Artikel i tidskrift
DOI för The asymmetrical friction mechanism that puts the curl in the curling stone
-
-
Tribochemically Active Ti–C–S Nanocomposite Coatings
Ingår i Materials Research Letters, s. 148-155, 2013.
Artikel i tidskrift
DOI för Tribochemically Active Ti–C–S Nanocomposite Coatings Ladda ner fulltext (pdf) av Tribochemically Active Ti–C–S Nanocomposite Coatings
-
-
Ultra-low friction of W-S-N solid lubricant coating
Ingår i Surface & Coatings Technology, s. 541-548, 2013.
Artikel i tidskrift
-
Understanding field experience of contact performance from lab fretting tests of model contacts
Ingår i Proc. IEEE 59th HOLM Conference on Electrical Contacts, s. 207-214, 2013.
Konferensbidrag
-
Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses
2013.
Konferensbidrag
-
ANS Triboconditioning: In-Manufacture Running-in Process for Improving Tribological Properties of Mechanical Parts made of Steel and Cast Iron
Ingår i 18th International Colloquium Tribology – Industrial and Automotive Lubrication, Ostfildern, Germany, 2012.
Konferensbidrag
-
Calculated trajectories of curling stones sliding under asymmetrical friction
Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.
Konferensbidrag
-
Coatings and surface treatments: interaction with lubricants
Ingår i The Handbook of Lubrication and Tribology, s. 41-1-41-13, 2012.
Kapitel i bok, del av antologi
-
Comparison of anodised aluminium surfaces from four fabrication methods
Ingår i Journal of Materials Processing Technology, s. 2272-2281, 2012.
Artikel i tidskrift
DOI för Comparison of anodised aluminium surfaces from four fabrication methods
-
Complex frictional analysis of self-lubricant W-S-C/Cr coating
Ingår i Faraday discussions, s. 383-401, 2012.
Artikel i tidskrift
DOI för Complex frictional analysis of self-lubricant W-S-C/Cr coating
-
Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings
Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012.
Konferensbidrag
-
Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations
Ingår i Tribology International, s. 153-160, 2012.
Artikel i tidskrift
-
Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement
Ingår i Biomatter, s. 94-102, 2012.
Artikel i tidskrift
-
Evaluation of TiB2 coatings in cold forming of aluminium
Ingår i Surface Engineering, s. 517-525, 2012.
Artikel i tidskrift
DOI för Evaluation of TiB2 coatings in cold forming of aluminium
-
Fabrication and evaluation of SixNy coatings for total joint replacements
Ingår i Journal of materials science. Materials in medicine, s. 1879-1889, 2012.
Artikel i tidskrift
DOI för Fabrication and evaluation of SixNy coatings for total joint replacements
-
Formation of tribologically beneficial layer on counter surface with smart chemical design of DLC coating in fuel contact
Ingår i Tribology - Materials, Surfaces & Interfaces, s. 102-108, 2012.
Artikel i tidskrift
-
Friction and wear behaviour of low-friction coatings in conventional and alternative fuels
Ingår i Tribology International, s. 22-28, 2012.
Artikel i tidskrift
DOI för Friction and wear behaviour of low-friction coatings in conventional and alternative fuels
-
Heavy duty exhaust valve simulation and evaluation in a test rig
Ingår i Nordtrib, Trondheim, 2012, 2012.
Konferensbidrag
-
How tribological propertiesof DLC coatings vary in different engine oils at elevated temperature
Ingår i Nordtrib, Trondheim, Norge, 2012.
Konferensbidrag
-
Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts
Ingår i Tribology International, s. 9-18, 2012.
Artikel i tidskrift
-
Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM
Ingår i Nordtrib, Trondheim, Norway, 2012, 2012.
Konferensbidrag
-
Mechanical properties of SixNy- and SixCyNz-coatings for total joint replacements
Ingår i 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012., 2012.
Konferensbidrag
-
Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming
Ingår i Wear, s. 49-60, 2012.
Artikel i tidskrift
-
Mechanisms of transfer of aluminium to PVD-coated forming tools
Ingår i Tribology letters, s. 299-312, 2012.
Artikel i tidskrift
DOI för Mechanisms of transfer of aluminium to PVD-coated forming tools
-
Mechanisms responsible for compositional variations of films sputtered from a WS2 target
Ingår i International Conference on Metallurgical Coatings and Thin films (ICMCTF) 23-27/04 2012, San Diego, abstract number:428, 2012.
Konferensbidrag
-
Micro scratch testing of silicon nitride and silicon carbon nitride coatings
Ingår i Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012., 2012.
Konferensbidrag
-
Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries
Ingår i Tribologia, s. 22-31, 2012.
Artikel i tidskrift
-
New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM
Ingår i Wear, s. 61-73, 2012.
Artikel i tidskrift
-
-
-
On wear resistance of tool steel
Ingår i Journal of Manufacturing Processes, s. 195-198, 2012.
Artikel i tidskrift
-
Performance and Tribofilm Formation of a Low-Friction Coating Incorporating Inorganic Fullerene Like Nano-Particles
Ingår i Surface & Coatings Technology, s. 2325-2329, 2012.
Artikel i tidskrift
-
Protective tribofilm build up from exhaust residues on the surface on exhaust valve systems in a test rig
Ingår i Nordtrib, Trondheim, Norway, 2012, 2012.
Konferensbidrag
-
Smart DLC coating top coating for reduction of counter surface wear in fuel contact
Ingår i Faraday Discussion 156: Tribology, 2012.
Konferensbidrag
-
Sulfur-doping of nc-TiC/a-C films by reactive sputtering
Ingår i Thirteenth International Conference on Plasma Surface Engineering, Garmisch-Partenkirchen, Germany, 10-14 September 2012, 2012.
Konferensbidrag
-
Test rig investigations of cylinder liner and piston ring wear caused by transition to greener ship transports: An initial study
Ingår i Nordtrib 2012, 15th Nordic Symposium on Tribology, Trondheim, June 12-15 2012, 2012.
Konferensbidrag
-
The defect landscape and self-ordering mechanism of solid lubricant coatings exhibiting superlubricity
Ingår i Proceedings of the 15th European Microscopy Congress, s. 493-494, 2012.
Konferensbidrag
-
The influence of grain size and surface treatment of the tribofilm formation on alumina components
Ingår i Wear, s. 17-24, 2012.
Artikel i tidskrift
-
Tribofilm formation of lightly loaded self mated alumina contacts
Ingår i Wear, s. 39-45, 2012.
Artikel i tidskrift
DOI för Tribofilm formation of lightly loaded self mated alumina contacts
-
Tribological requirements for selection of new materials for electrical connectors
Ingår i NordTrib 2012, Trondheim, Norge, 2012.
Konferensbidrag
-
Tribology of selenium-based solid lubricants alloyed with carbon
Ingår i Advances in lubrication, Costa Rica, 2012.
Konferensbidrag
-
Wear study of coated heavy duty exhaust valve systems in a experimental test rig
2012.
Konferensbidrag
-
Wear study of coated heavy duty exhaust valve systems in a experimental test rig
Ingår i SAE International technical papers, 2012.
Artikel i tidskrift
DOI för Wear study of coated heavy duty exhaust valve systems in a experimental test rig
-
-
Design of carbide-based nanocomposite thin films by selective alloying
Ingår i Surface & Coatings Technology, s. 583-590, 2011.
Artikel i tidskrift
DOI för Design of carbide-based nanocomposite thin films by selective alloying
-
-
Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool
Ingår i Acta Materialia, s. 68-74, 2011.
Artikel i tidskrift
-
First-principles atomistic study of surfaces of Fe-rich Fe-Cr
Ingår i Journal of Physics, s. 265004-, 2011.
Artikel i tidskrift
DOI för First-principles atomistic study of surfaces of Fe-rich Fe-Cr
-
Friction and contact resistance of nanocomposite Ti-Ni-C coatings
Ingår i Wear, s. 555-566, 2011.
Artikel i tidskrift
DOI för Friction and contact resistance of nanocomposite Ti-Ni-C coatings
-
Hard low friction WSN coating deposited by magnetron sputtering: Sliding in dry nitrogen
2011.
Konferensbidrag
-
-
On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation
Ingår i Wear, s. 204-2057, 2011.
Artikel i tidskrift
-
-
Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry
Ingår i Tribologia, s. 37-50, 2011.
Artikel i tidskrift
-
Tribological conditions of curling - the ultimate friction sport?
Ingår i 18th International Conference on Wear of Materials, Philadelphia, USA, April 3-7, 2011, 2011.
Konferensbidrag
-
Wear mechanism study of exhaust valve system in modern heavy duty combustion engines
Ingår i Wear, s. 2477-2484, 2011.
Artikel i tidskrift
DOI för Wear mechanism study of exhaust valve system in modern heavy duty combustion engines
-
Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement
Ingår i Asiatrib 2010, 2010.
Konferensbidrag
-
Conductive nanocomposite ceramics as tribological and electrical contact materials
Ingår i European Physical Journal, s. 22902-, 2010.
Artikel i tidskrift
DOI för Conductive nanocomposite ceramics as tribological and electrical contact materials
-
Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films
Ingår i Thin Solid Films, s. 2607-2616, 2010.
Artikel i tidskrift
DOI för Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films
-
Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool
2010.
Konferensbidrag
-
Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool
Ingår i 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010, 2010.
Konferensbidrag
-
Frequency- and contact load dependency for pneumatic clutch actuators
Ingår i Proceedings of NORDTRIB 2010 : 14th Nordic Symposium on Tribology, 2010.
Konferensbidrag
-
Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions
2010.
Konferensbidrag
-
Friction behaviour of Fullerene Like WS2 nanoparticles in a Ni-matrix compared to PVD WS2 and MoS2 coatings
Ingår i ICMCTF, 2010.
Konferensbidrag
-
-
Influence on surface micro topography of HSS surfaces from argon ion etch cleaning
2010.
Konferensbidrag
-
Investigations of the friction behaviour and surface modifications for low-friction coatings in traditional and new alternative fuels
Ingår i NordTrib 2010, 2010.
Konferensbidrag
-
Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling
Ingår i Surface & Coatings Technology, s. 3606-3613, 2010.
Artikel i tidskrift
-
Nanocomposite Coatings for Contact Brush Applications
Ingår i Proceedings of the 4th International Tribology Congress, ASIATRIB2010, 2010.
Konferensbidrag
-
On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings
Ingår i Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen, 2010.
Konferensbidrag
-
Resistance to abrasive wear – fundamental and practical aspects: Keynote Lecture
2010.
Konferensbidrag
-
Synthesis, structure and properties of Ni-alloyed TiCx-based thin films
Ingår i Journal of Materials Chemistry, s. 5950-5960, 2010.
Artikel i tidskrift
DOI för Synthesis, structure and properties of Ni-alloyed TiCx-based thin films
-
The Uppsala Load Scanner –Second generation
Ingår i Nordtrib 2010, Storforsen, Sweden, 2010.
Konferensbidrag
-
Tribofilms: On the crucial importance of tribologically induced surface modifications
Ingår i Recent Developments in Wear Prevention, Friction and Lubrication, s. 197-225, 2010.
Kapitel i bok, del av antologi
-
Tribological behaviour for low-friction coatings at conformal contact pressure in traditional and new-alternative fuels
Ingår i ASIATRIB 2010, PERTH, WESTERN AUSTRALIA, 5-9 DECEMBER 2010, 2010.
Konferensbidrag
-
Development of a new type micro slurry-jet erosion (MSE) tester for evaluation of wear properties of hard thin coatings
Ingår i Lubrication Science, s. 213-226, 2009.
Artikel i tidskrift
-
EFTEM studies on the adhesion of stainless steel against a V40 steel forming tool
Ingår i EDGE 2009 - International EELS Workshop, Banff, Canada 17-22 May 2009, 2009.
Konferensbidrag
-
Evaluation of Wear Properties of DLC Films by a Micro Slurry-Jet Erosion (MSE) Test
Ingår i WOM 2009 in Las Vegas 19-23/4 2009, 2009.
Konferensbidrag
-
Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications
Ingår i Plasma Processes and Polymers, s. S928-S934, 2009.
Artikel i tidskrift
-
Influence from humidity on the alumina friction drive system of an ultrasonic motor
Ingår i Tribology International, s. 1467-1477, 2009.
Artikel i tidskrift
DOI för Influence from humidity on the alumina friction drive system of an ultrasonic motor
-
Influence from tool roughness on the risk of work material adhesion and transfer
Ingår i Materials and Manufacturing Processes, s. 913-917, 2009.
Artikel i tidskrift
DOI för Influence from tool roughness on the risk of work material adhesion and transfer
-
-
Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces
Ingår i Journal of materials science. Materials in medicine, s. 1401-1408, 2009.
Artikel i tidskrift
DOI för Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces
-
Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling
s. 87-92 2009.
Konferensbidrag
-
Laboratory test simulation of galling in cold forming of aluminium
Ingår i Wear, s. 2278-2286, 2009.
Artikel i tidskrift
DOI för Laboratory test simulation of galling in cold forming of aluminium
-
Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings
Ingår i Wear, s. 264-269, 2009.
Artikel i tidskrift
DOI för Micro-Slurry-jet Erosion (MSE) testing of CVD TiC/TiN and TiC coatings
-
On the role of tribofilm formation on the alumina drive components of an ultrasonic motor
Ingår i Wear, s. 1295-1300, 2009.
Artikel i tidskrift
DOI för On the role of tribofilm formation on the alumina drive components of an ultrasonic motor
-
On the wear of PVD-coated HSS hobs in dry gear cutting
Ingår i Wear, s. 444-452, 2009.
Artikel i tidskrift
DOI för On the wear of PVD-coated HSS hobs in dry gear cutting
-
Potential of a new low-friction coating based on inorganic fullerens: comparison with state-of-the-art PVD coatings
s. 400- 2009.
Konferensbidrag
-
Properties affecting machinability of hot work tool steels
Ingår i Tool Steels - Deciding Factor in Worldwide Production, 2009.
Konferensbidrag
-
Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test
Ingår i Wear, s. 2257-2268, 2009.
Artikel i tidskrift
DOI för Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test
-
-
The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films
Ingår i Thin Solid Films, s. 71-76, 2009.
Artikel i tidskrift
-
The effect of grain size on the tribofilm formation on the alumina friction drive system of an ultrasonic motor
Ingår i ECOTRIB 09, s. 965-970, 2009.
Konferensbidrag
-
The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating
Ingår i Surface and Coatings Technology, s. 2989-2994, 2009.
Artikel i tidskrift
DOI för The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating
-
The Role of Surface Treatment in the Tribofilm Formation on Alumina Friction Drive Components
Ingår i World tribology congress 2009, Kyoto, 2009.
Konferensbidrag
-
Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings
Ingår i Wear, s. 379-387, 2009.
Artikel i tidskrift
DOI för Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings
-
Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy
Ingår i Wear, s. 988-994, 2009.
Artikel i tidskrift
-
Wear of an AlCrN coated HSS Hob in Dry Gear Cutting
Ingår i HSS FORUM - Smart Solutions for the Future of Metal Cutting, 2009.
Konferensbidrag
-
Wear study of field worn clutch actuators and evaluation of a model test
Ingår i Wear, s. 2269-2272, 2009.
Artikel i tidskrift
DOI för Wear study of field worn clutch actuators and evaluation of a model test
-
Wear tests of pneumatic cylinders of aluminium from permanent mould casting and extrusion
Ingår i Proceedings of the 2nd European Conference on Tribology (ECOTRIB 2009), 2009.
Konferensbidrag
-
A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons
Ingår i Wear, s. 1129-1141, 2008.
Artikel i tidskrift
DOI för A new view of the deterioration and wear of WC/Co cemented carbide rock drill buttons
-
-
Chemical modification in wear tracks of chemical vapor deposited diamond surfaces studied with X-ray absorption spectroscopy
Ingår i Tribology letters, s. 31-34, 2008.
Artikel i tidskrift
-
Conductive nanocomposite ceramics as tribological and electrical contact materials
Ingår i International Conference on Electrical Contacts, ICEC 2008, 2008.
Konferensbidrag
-
Designed high-friction surfaces: influence of roughness and deformation of the counter surface
Ingår i Wear, s. 807-814, 2008.
Artikel i tidskrift
-
Hardness and elastic properties of covalent/ionic solid solutions from first-principles theory
Ingår i Journal of Applied Physics, s. 083505-, 2008.
Artikel i tidskrift
-
Hydroxylapatite growth on single-crystal rutile substrates
Ingår i Biomaterials, s. 3317-3323, 2008.
Artikel i tidskrift
DOI för Hydroxylapatite growth on single-crystal rutile substrates
-
In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates
Ingår i BIOCERAMICS, VOL 20, PTS 1 AND 2, s. 689-692, 2008.
Konferensbidrag
-
Influence from tool roughness on the risk of work material adhesion and transfer
2008.
Konferensbidrag
-
Influences from humidity on the friction drive system of a piezoelectric motor
2008.
Konferensbidrag
-
Lab test simulation of galling in cold forming of aluminium
Ingår i NordTrib 2008, 2008.
Konferensbidrag
-
On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel
Ingår i Wear, s. 781-787, 2008.
Artikel i tidskrift
DOI för On adhesion and metal transfer in sliding contact between TiN and austenitic stainless steel
-
On adhesion of work material in metal forming
Ingår i International journal of microstructure and materials properties, s. 401-412, 2008.
Artikel i tidskrift
-
On the relation between composition, oxidation and machinability of tool steels
2008.
Konferensbidrag
-
On the wear of pneumatic clutch actuators
Ingår i Proceedings of NORDTRIB 2008 : 13th Nordic Symposium on Tribology, 2008.
Konferensbidrag
-
Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films
Ingår i Trends in Biomaterials & Artificial Organs, s. 104-110, 2008.
Artikel i tidskrift
-
Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test
Ingår i Proceedings of the International conference Nordtrib 2008, 2008.
Konferensbidrag
-
Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour
Ingår i Proceedings of the International conference Nordtrib 2008:, 2008.
Konferensbidrag
-
Rock penetration into cemented carbide drill buttons during rock drilling
Ingår i Wear, s. 1142-1151, 2008.
Artikel i tidskrift
DOI för Rock penetration into cemented carbide drill buttons during rock drilling
-
Targeting micro-sectioning: A technique to study subsurface features in worn specimens
Ingår i Wear, s. 1152-1156, 2008.
Artikel i tidskrift
DOI för Targeting micro-sectioning: A technique to study subsurface features in worn specimens
-
Analysis of the tribofilm formation on the friction drive surfaces of a piezoelectric motor
Ingår i ASME/STLE International Joint Tribology Conference, Parts A and B, s. 871-872, 2007.
Konferensbidrag
-
-
Comparison of two test methods for evaluation of forming tool materials
Ingår i Tribotest, s. 147-158, 2007.
Artikel i tidskrift
DOI för Comparison of two test methods for evaluation of forming tool materials
-
Design of Nanocomposite Low-Friction Coatings
Ingår i Advanced Functional Materials, s. 1611-1616, 2007.
Artikel i tidskrift
-
Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element
Ingår i E-MRS spring meeting 2007 (Strasbourg 28 maj - 1 juni), 2007.
Konferensbidrag
-
On adhesion in tribological contacts-Causes and consequences
Ingår i Tribologia, s. 3-16, 2007.
Artikel i tidskrift
-
Predicting hardness of covalent/ionic solid solution from first-principles theory
Ingår i Applied Physics Letters, s. 121918-, 2007.
Artikel i tidskrift
DOI för Predicting hardness of covalent/ionic solid solution from first-principles theory
-
-
Textured surfaces for improved lubrication at high pressure and low sliding speed of roller/piston in hydraulic motors
Ingår i Tribology International, s. 355-359, 2007.
Artikel i tidskrift
-
Textured surfaces in sliding boundary lubricated surfaces – mechanisms, possibilities and limitations
Ingår i Tribology - Materials, Surfaces & Interfaces, s. 181-189, 2007.
Artikel i tidskrift
-
The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel
Ingår i Wear, s. 885-892, 2007.
Artikel i tidskrift
-
Theoretical evidence of the compositional threshold behavior of FeCr surfaces
Ingår i Physical Review B. Condensed Matter and Materials Physics, s. 220401-1-220401-4, 2007.
Artikel i tidskrift
DOI för Theoretical evidence of the compositional threshold behavior of FeCr surfaces
-
Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings
2007.
Konferensbidrag
-
Tribological surfaces of a pneumatic clutch actuator
Ingår i Proceeding of ECOTRIB 2007, Slovenien Society for Tribology, June 12-15, 2007, s. 955-967, 2007.
Konferensbidrag
-
-
-
An atomistic approach to the initiation mechanism of galling
Ingår i Computational materials science, s. 193-197, 2006.
Artikel i tidskrift
DOI för An atomistic approach to the initiation mechanism of galling
-
-
Combiantion of DLC coatings and EP additivesfor improveds tribological behaviour of boundary lubricated surfaces
Ingår i Wear, s. 32-, 2006.
Artikel i tidskrift
-
Combination of DLC coatings and EP additives for improved tribological behaviour of boundary lubricated surfaces
Ingår i Wear, s. 32-40, 2006.
Artikel i tidskrift
-
Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components
Ingår i Advances in Science and Technology, s. 122-131, 2006.
Artikel i tidskrift
-
Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components
Ingår i Advances in Science and Technology, s. 2750-, 2006.
Konferensbidrag
-
-
Geometrically Defined All-Diamond Abrasive Surfaces for Pad Conditioning in Chemical Mechanical Polishing
Ingår i J Electrochem Soc, s. G1-G6, 2006.
Artikel i tidskrift
-
-
Improvement in galling performance through surface engineering
Ingår i Surface Engineering, s. 235-238, 2006.
Artikel i tidskrift
DOI för Improvement in galling performance through surface engineering
-
-
On the effect of surface topography and humidity on lubricated running-in of a carbon based coating
Ingår i Wear, s. 1237-1246, 2006.
Artikel i tidskrift
-
-
Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding
Ingår i Wear, s. 96-100, 2006.
Artikel i tidskrift
DOI för Surface analysis of laser cladded Stellite exposed to self-mated high load dry sliding
-
Surface modification of brake discs to reduce squeal prob-lems
Ingår i Wear, s. 53-57, 2006.
Artikel i tidskrift
-
Surface modification of brake discs to reduce squeal problems
Ingår i Wear, s. 53-57, 2006.
Artikel i tidskrift
-
Tribological texturing of steel surfaces with a novel diamond embossing tool technique
Ingår i Tribology International, s. 695-700, 2006.
Artikel i tidskrift
DOI för Tribological texturing of steel surfaces with a novel diamond embossing tool technique
-
Wear induced material modification of cemented carbide rock drills
Ingår i Int. Journal of Refractory Metals and Hard Materials, s. 168-176, 2006.
Artikel i tidskrift
-
Wear induced material modifications of cemented carbide rock drill buttons
Ingår i International journal of refractory metals & hard materials, s. 168-176, 2006.
Artikel i tidskrift
DOI för Wear induced material modifications of cemented carbide rock drill buttons
-
A geometrically defined all-diamond pad conditioner
Ingår i World Tribology Congress III, Washington., 2005.
Konferensbidrag
-
Effect of surface textures in highly loaded grease lubricated reciprocating sliding contacts
Ingår i World Tribology Congress III, Washington., 2005.
Konferensbidrag
-
High Resolution Characterisation of Friction Induced Deformation using the FIB
Ingår i International Tribology Conference, Kobe., 2005.
Konferensbidrag
-
Influence of EP additive concentration on the tribological behaviour of DLC-coated steel surfaces
Ingår i Surface and Coatings Technology, s. 357-366, 2005.
Artikel i tidskrift
-
Possibilities for Optimisation of Low friction coatings
Ingår i International Tribology Conference, Kobe., 2005.
Konferensbidrag
-
Reduction of Brake Squeal using Brake Disc Surface Modifications
Ingår i International Tribology Conference, Kobe., 2005.
Konferensbidrag
-
Therma fatigue cracking of surface engineered hot work tool steel
Ingår i Surface and Coatings Technology, s. 216-227, 2005.
Artikel i tidskrift
-
Tribological conditions for successful solid lubrication
Ingår i International Tribology Conference, Kobe., 2005.
Konferensbidrag
-
Vibration-induced deterioration of tin-coated conncetors studied by using a force controlled fretting bench-test
Ingår i Proc. 51st IEEE Holm Conf. on Electrical Contacts, s. 97-106, 2005.
Konferensbidrag
-
Wear mechanisms of HSS cutting tools
Ingår i SME (Society of Manufacturing Engineeres) Technical Paper, s. 1-14, 2005.
Artikel i tidskrift
-
Wear mechanisms of HSS metal cutting tools
Ingår i Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal Cutting, February 2-3, 2005, Aachen, Germany., 2005.
Konferensbidrag
-
A comparative evaluation method for low friction coatings in dry sliding thrust bearings
Ingår i Tribologia, s. 27-36, 2004.
Artikel i tidskrift
-
A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering
Ingår i Thin Solid Films, s. 10-15, 2004.
Artikel i tidskrift
-
Comparison between different test methods for evaluation of galling properties of surface engineered tool surfaces
Ingår i Wear, s. 843-851, 2004.
Artikel i tidskrift
-
Contact pressure induced shifts in the friction behaviour of laser processed stellite
s. 340- 2004.
Konferensbidrag
-
Failure modes in field tested brass die casting dies,
Ingår i Journal of Materials Processing Technology, s. 108-118, 2004.
Artikel i tidskrift
-
Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated contacts
Ingår i Tribology letters, s. 553-559, 2004.
Artikel i tidskrift
-
Friction Mechanisms of Coated Tribological Components
Ingår i Proceedings of the VTI conference Challenges in Surface Engineering, Ghent, Belgium,, 2004.
Konferensbidrag
-
Influence of surface roughness and coating type on galling properties of forming tools
Ingår i Int. Conf. on Recent Advances in Manufacture & Use of Tools and Dies, and Stamping of Steel Sheets, Olofström, Sweden, 2004.
Konferensbidrag
-
Influence of surface roughness and coating type on the galling properties of coated forming tool steel
Ingår i Surface and Coatings Technology, s. 338-348, 2004.
Artikel i tidskrift
-
Interactive Tribological Coatings
Ingår i COST 532 Conference in Ghent, s. 68-75, 2004.
Konferensbidrag
-
Micro-scratch evaluation of rock types - a means to comprehend rock drill wear
Ingår i Trib. Int, s. 203-210, 2004.
Artikel i tidskrift
-
Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition
Ingår i Appl. Phys. A, s. 573-577, 2004.
Artikel i tidskrift
DOI för Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition
-
Penetrated rock as a weakening mechanism in cemented carbide rock drill wear.
Ingår i Nordtrib 2004, Tromsö, Norway, s. 627–636-, 2004.
Konferensbidrag
-
Phase transformations in CVD diamond wear tracks revealed by NEXAFS mapping
Ingår i Nordtrib 2004, Tromsö, Norway, 2004.
Konferensbidrag
-
Scratch Testing of a Dental Restorative Material based on Calcium Aluminate
Ingår i Ceramic Engineering and Science Proc, s. 577-, 2004.
Artikel i tidskrift
-
Scratch testing of a dental restorative material based on calcium aluminate
Ingår i 28 th International Cocoa Beach Conference and Exposition on Advanced Ceramics & Composites, Cocoa Beach, 2004.
Konferensbidrag
-
Sealing to improve the wear characteristics of sprayed alumina through electro-deposited Ni
Ingår i Wear, s. 1153-1162, 2004.
Artikel i tidskrift
-
Sealing to improve the wear of properties of plasma sprayed alumina by electro-deposited Ni
Ingår i www.sciencedirect.com, 2004.
Artikel i tidskrift
-
Simulation and evaluation of thermal fatigue cracking of hot work tool steel
Ingår i International Journal of Fatigue, s. 1095-1107, 2004.
Artikel i tidskrift
-
Surface engineering - Which are the gains
Ingår i VTI conference Challenges in Surface Engineering, Ghent,, 2004.
Konferensbidrag
-
Surface modification of brake discs to reduce squealing problems."
Ingår i Nordtrib 2004, Tromsö, Norway, 2004.
Konferensbidrag
-
Temperature profiles and conditions for thermal fatigue cracking in brass die casting dies
Ingår i Journal of Materials Processing Technology, s. 228-236, 2004.
Artikel i tidskrift
-
The effect of embossed surface textures on the friction and wear in a boundary lubricated contact
Ingår i Nordtrib 2004, Tromsö, Norway, 2004.
Konferensbidrag
-
Tribological behaviour of WC/C coatings operating under different lubrication regimes.
Ingår i Surface and Coatings Technology, s. 558-565., 2004.
Artikel i tidskrift
-
Tribological properties of sprayed alumina coatings sealed by electro-deposition of Cu
Ingår i Wear, s. 1163-1175, 2004.
Artikel i tidskrift
-
Wear and friction properties of coatings for forming tools
Ingår i Strojniski vestnik – Journal of Mechanical Engineering, s. 156-, 2004.
Artikel i tidskrift
-
Wear induced material modification of cemented carbide rock drills
Ingår i Conf on Hard Materials, Puert Rico, 2004.
Konferensbidrag
-
Wear mechanisms of HSS metal cutting tools
Ingår i Proceedings of the 1st International HSS Forum Conference : Smart Solutions for Metal, 2004.
Konferensbidrag
-
Influence of surface texture on boundary lubricated sliding contacts
Ingår i Tribology International, s. 857-864, 2003.
Artikel i tidskrift
DOI för Influence of surface texture on boundary lubricated sliding contacts
-
Low-friction carbon-rich carbide coatings deposited by co-sputtering
Ingår i Wear, s. 1084-1091, 2003.
Artikel i tidskrift
-
-
-
-
Novel load-carrying layers to support low-friction PVD coatings
Ingår i Surface and Coatings Technology, s. 14-22, 2003.
Artikel i tidskrift
-
The influence of surface roughness on friction and wear of machine element coatings
Ingår i Wear, s. 1092-1098, 2003.
Artikel i tidskrift
DOI för The influence of surface roughness on friction and wear of machine element coatings
-
Design of low weight components: a theoretical approach
Ingår i Surface Engineering, s. 93-97, 2002.
Artikel i tidskrift
DOI för Design of low weight components: a theoretical approach
-
Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements
Ingår i Materials Science and Engineering A, s. 7-21, 2002.
Artikel i tidskrift
-
Effects of substrate bias polarity on tribological a-C:Ta coatings
Ingår i AUSTRIB ´02, Perth, 2002.
Konferensbidrag
-
Investigations on electrical contacts subjected to fretting motion
Ingår i ICEC - 21st Int. Conf. on Electrical Contacts, Zurich, 2002.
Konferensbidrag
-
Load-carrying capacity of Ni-plated media in spherical indentation: experimental and theoretical results
Ingår i Surface Engineering, s. 98-104, 2002.
Artikel i tidskrift
-
Sliding wear and rolling contact fatigue of rough low friction coatings
Ingår i Frontiers in Tribology, 2002.
Konferensbidrag
-
Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies
Ingår i Thin Solid Films, s. 224-230, 2002.
Artikel i tidskrift
-
The influence of surface roughness on friction and wear of machine element coatings
2002.
Konferensbidrag
-
Tribological properties of brush plated coatings
Ingår i 2nd ASIATRIB International Conference, Seoul, October 21-23, 2002: Proceedings, s. 171-, 2002.
Konferensbidrag
-
Friction, wear and electric properties of lubricated tin-coated contact terminals
Ingår i Proc. 34th Annual Connector & Interconnection Technology Symp., Anaheim, CA, USA, Oct. 1-3, 2001.
Konferensbidrag
-
Mechanical and tribological requirements and evaluation of coating composites
Ingår i Modern Tribology Handbook, s. 931-960, 2001.
Kapitel i bok, del av antologi
-
An experimental method for evaluation of the load carrying capacity of coated aluminium: the influence of coating stiffness, hardness and thickness
Ingår i Surface & Coatings Technology, s. 107-113, 2000.
Artikel i tidskrift
-
Carbide-metal phase interpenetrated double skeleton microstructures
Ingår i 24th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures, 2000.
Konferensbidrag
DOI för Carbide-metal phase interpenetrated double skeleton microstructures
-
Evaluation of a flexible physical vapor deposited TiC-C coating system
Ingår i Surface & Coatings Technology, s. 154-161, 2000.
Artikel i tidskrift
DOI för Evaluation of a flexible physical vapor deposited TiC-C coating system
-
Fretting degradation of PVD coated copper and aluminium
Ingår i NORDTRIB 2000, s. 481-, 2000.
Konferensbidrag
-
Fretting testing of electrical contacts at small displacement amplitudes: Experiences from a BriteEuram project
Ingår i Proc. 20. International Conference on Electrical Contacts (ICEC), Stockholm, 06/2000, s. 471-476, 2000.
Konferensbidrag
-
Mapping of mechanical properties of WC-Co using nanoindentation
Ingår i Tribology letters, s. 147-152, 2000.
Artikel i tidskrift
DOI för Mapping of mechanical properties of WC-Co using nanoindentation
-
Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates
Ingår i Tribology International, s. 737-742, 2000.
Artikel i tidskrift
-
-
Influence of lamellae thickness on the corrosion behaviour of multilayered PVD TiN CrN coatings
Ingår i THIN SOLID FILMS, s. 202-209, 1999.
Artikel i tidskrift
-
Influence of residual stresses on fracture and delamination of thin hard coatings
Ingår i Wear, s. 262-269, 1999.
Artikel i tidskrift
DOI för Influence of residual stresses on fracture and delamination of thin hard coatings
-
The multilayer effect in abrasion: optimising the combination of hard and tough phases
Ingår i Surface & Coatings Technology, s. 1138-1144, 1999.
Artikel i tidskrift
DOI för The multilayer effect in abrasion: optimising the combination of hard and tough phases
-
Corrosion behaviour of Ti/TiN multilayer coated tool steel
Ingår i SURFACE & COATINGS TECHNOLOGY, s. 191-196, 1998.
Artikel i tidskrift
-
Cracking resistance of thin hard coatings estimated by four-point bending
Ingår i Surface and coatings technology, s. 57-63, 1997.
Artikel i tidskrift
DOI för Cracking resistance of thin hard coatings estimated by four-point bending
-
On the use of ceramic PVD coatings to replace metallic coatings in electrical contacts.
Ingår i Surface & Coatings Technology, s. 270-278, 1997.
Artikel i tidskrift
-
Stationary loading, fretting and sliding of silver coated copper contacts: Influence of corrosion films and corrosive atmosphere
Ingår i Tribology International, s. 165-175, 1997.
Artikel i tidskrift
-
The contact resistance of rolling silver coated copper contacts
Ingår i Proc. 43rd IEEE Holm Conf. on Electrical Contacts, s. 33-40, 1997.
Konferensbidrag
-
Tribological evaluation of thermally activated CVD diamond-like carbon (DLC) coatings
Ingår i SURFACE & COATINGS TECHNOLOGY, s. 230-235, 1997.
Artikel i tidskrift
-
Gross plastic fretting - examination of the gross weld regime.
Ingår i Wear, s. 255-264, 1996.
Artikel i tidskrift
DOI för Gross plastic fretting - examination of the gross weld regime.
-
Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.
Ingår i Wear, s. 244-254, 1996.
Artikel i tidskrift
DOI för Gross plastic fretting - mechanical deterioration of silver coated electrical contacts.
-
Tribologi i elektriska kontakter: en problempresentation
Ingår i Tribologia, s. 16-36, 1996.
Artikel i tidskrift
-
Tribology of electrical contacts
deterioration of silver coated copper Kassman Rudolphi, Åsa
Doktorsavhandling, sammanläggning
-
Conduction through corrosion films on silver plated copper in power contacts
Ingår i Proceedings of the Forty-First IEEE Holm Conference on Electrical Contacts, s. 124-134, 1995.
Konferensbidrag
DOI för Conduction through corrosion films on silver plated copper in power contacts
-
A new test method for the intrinsic abrasion resistance of thin coatings
Ingår i Surface & Coatings Technology, s. 75-84, 1991.
Artikel i tidskrift
DOI för A new test method for the intrinsic abrasion resistance of thin coatings
-
How TiN coatings improve the performance of high speed steel cutting tools.
Ingår i Surface & Coatings Technology, s. 243-256, 1990.
Artikel i tidskrift
DOI för How TiN coatings improve the performance of high speed steel cutting tools.